Kenmore Range 362.75208890 (36275208890, 362 75208890) Parts

Genuine Ge part

Locator Pin

By: Ge

Part Number: WB2K17

Genuine Ge part

Grommet

By: Ge

Part Number: WB2K8

Genuine Ge part

Burner Grate

By: Ge

Part Number: WB31K10018

Color: Taupe.

Best Seller

Genuine Ge part

The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.

Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.

Symptoms of a bad spark module include:

Burners that will not ignite or only intermittently ignite
Flashback or burning above the burner head
The smell of gas when turning burners on

This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014

My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and... Read more

Genuine Ge part

Outer Door Glass

5.0 (3)

By: Ge

Part Number: WB57K2

Color: Black

Do-It-Yourself Stories from Customers like You The front door glass of my ge xl44 gas range was shattered by a flying crockpot Kurt N. • South Williamsport , PA • May 10, 2017

I lifted up the door and removed it. Next, I laid out newspaper on the floor. I placed the door on the newspaper upside down. With my socket driver, I removed the bottom door trim. I then used a pocket knife to remove the remaining glass in the top groove. I then slid in the new glass and reinstalled the trim. It took 30 minutes to replace the glass and clean up the glass fragments from the previous door glass. I looked up a video on how to replace it Utube. Personal safety equipment - Safety... Read more

Genuine Ge part

Broiler Pan

5.0 (2)

By: Ge

Part Number: WB49K2

Do-It-Yourself Stories from Customers like You Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015

New pans Read more

Genuine Ge part

Handle Cap - Rt (Wh)

4.0 (1)

By: Ge

Part Number: WB7K5338

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019

Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ... Read more

Genuine Ge part

Door Spring Hook

By: Ge

Part Number: WB2K11

Genuine Ge part

Retainer Clip

5.0 (2)

By: Ge

Part Number: WB2X1082

Clip for door hinge.

Do-It-Yourself Stories from Customers like You Broken door hinge. Shari W. • Evansville , IN • February 07, 2018

By replacing the hinge. Read more

Genuine Ge part

Handle Cap (Light White)

4.0 (1)

By: Ge

Part Number: WB7K5339

This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:

Covers and protects the exposed end of a refrigerator door handle for a finished appearance
Conceals handle mounting hardware and reduces dirt build-up around the handle area
Helps prevent clothing snags and minimizes wear at the handle end
Matches light white finish to blend with white appliance trim

What's included:

One handle cap

Install notes:

Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
Avoid over-tightening clips or screws to prevent cracking the cap

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019

Genuine Ge part

Support Rivet

By: Ge

Part Number: WB10K13

Right hand side

Genuine Ge part

Burner Valve

5.0 (1)

By: Ge

Part Number: WB21K20

Do-It-Yourself Stories from Customers like You Bab gas valve Robert S. • East Northport , NY • November 21, 2016

Ordered replacement valve from ApplianceParts.com and reapired it myself. Read more

Genuine Ge part

Knob - Top Bur

5.0 (4)

By: Ge

Part Number: WB03K10010

Do-It-Yourself Stories from Customers like You This range had deteriorated burner drip pans and the wrong burner control knobs Jim H. • Mansfield Center , CT • July 01, 2016

Replacement was easy and only took a few minutes. They were a perfect match. Parts were well packaged and received in a few days. Will definitely buy from this company again. Read more