Kenmore Refrigerator 363.58472897 (36358472897, 363 58472897) Parts
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10100
Do-It-Yourself Stories from Customers like You
Ice maker was getting clogged with ice and would not dispense. Randall D. • Aylett , VA • December 08, 2019
Found that piece of auger was broken up front. Ordered auger and several other parts associated with ice maker just to be sure. Also replaced condenser motor which was making noise.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10411
Genuine Ge part
By: Ge
Part Number: WR11X180
Genuine Ge part
By: Ge
Part Number: WR14X462
Genuine Ge part
By: Ge
Part Number: WR17X10190
Do-It-Yourself Stories from Customers like You
Yellowing of handles and the recess portion of the water/ice dispenser recess Michael S. • Panama City Beach , FL • March 10, 2018
The handles were a simple fix. Just pop out the door trim, which I did by pulling on the very top and bottom of the trim to get it started. Then removed two star screws from the handle. I had to work the chrome plastic top and bottom handle caps off, then reversed the process for installing the new handle.
The Recess/Dispenser was a bit more tricky. I pried the trim and control panel off with a putty knife, then the rest was fairly obvious, such as removing screws and wiring connectors. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10282
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10366
Do-It-Yourself Stories from Customers like You
Ice bin and auger mechanism. Guillermo Y. • Coral Gables , FL • December 02, 2017
4 screws
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10401
Do-It-Yourself Stories from Customers like You
Broken freezer light shield. Michael F. • Irmo , SC • July 31, 2017
Replaced it... New part fit perfectly and looks great. Easy fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2062
Plate for dispenser.
Do-It-Yourself Stories from Customers like You
Rust the plate and auger rusted badly Kenneth R. • Navarre , FL • December 14, 2014
Disassemble, replace, reassemble
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3166
Genuine Ge part
By: Ge
Part Number: WR17X3493
Genuine Ge part
By: Ge
Part Number: WR17X3670
Genuine Ge part
By: Ge
Part Number: WR17X3838
Genuine Ge part
By: Ge
Part Number: WR17X3909
Lower fresh food section.
Do-It-Yourself Stories from Customers like You
Have a kenmore fridge manufactured by ge for sears lower right side crisper shelf guide broke and the lower dual light bilb housing also broke Thomas D. • Massapqua , NY • November 07, 2016
Went online ordered the two parts needed which were discounted lower than the list price Sears wanted for the two parts. After ordering the parts were delivered within two days transit time. Took me less than ten minutes to swap out the two defective parts.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X4153
A removable tray that catches drips and spills from the water and ice dispenser. Located at the bottom front of the dispenser area on the refrigerator door. Replace when the tray is cracked, stained beyond cleaning, or doesn't fit properly in its housing.
Do-It-Yourself Stories from Customers like You
Faulty water valve spit water from filler when making ice Nick G. • Portola Valley , CA • November 21, 2014
Replaced both the inlet water valve and the water dispenser valve. Replaced water dispenser switch and water filter.
Read more
More