Kenmore Refrigerator 363.58575892 (36358575892, 363 58575892) Parts

Genuine Ge part

Dispenser Auger

By: Ge

Part Number: WR17X4341

Do-It-Yourself Stories from Customers like You First thing i saw was that the ice cubes were coming out with rust although we need iron i prefer a pill Mike E. • El Paso , TX • July 22, 2015

I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that... Read more

Genuine Ge part

Slide Assembly Right

5.0 (5)

By: Ge

Part Number: WR72X253

Do-It-Yourself Stories from Customers like You Slide assembly left and right both were broken. Robert L. • Daytona Beach , FL • November 12, 2017

Ordered the parts and in a couple of days they arrived. A simple Philips screw driver was all that was needed to complete the install. Very simple, not complicated. You don't need to order the slide bushings as the slide assy. has them installed from the factory. Appliance Parts Pros is the best!!! terry,florida Read more

Genuine Ge part

Light Shield

5.0 (3)

By: Ge

Part Number: WR17X3909

Lower fresh food section.

Do-It-Yourself Stories from Customers like You Plastic shield light was warped from heat of light bulbs and would no longer stay in place on rear wall of refrigerator Paul S. • Green Valley , AZ • February 28, 2015

I needed to find a parts supplier who could provide a replacement part at a reasonable price. I first tried the manufacturer, General Electric, but they only showed freezer replacement parts for the model of my side-by-side refrigerator. In looking over a list of parts available for this model there seemed to be a possible part that sounded like a match but there was no picture to confirm that this was the correct replacement part. When i clicked the Appliance Parts Pros web site They had a... Read more

Genuine Ge part

Water Line Sleeve

5.0 (3)

By: Ge

Part Number: WR2X8933

Do-It-Yourself Stories from Customers like You Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017

Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more

Genuine Ge part

Pan Slide

5.0 (6)

By: Ge

Part Number: WR72X211

Left side.

Do-It-Yourself Stories from Customers like You Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018

Ordered parts from appliance parts pros and completed installation myself Read more

Genuine Ge part

Ice Dispenser Deflector

5.0 (3)

By: Ge

Part Number: WR17X2059

This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.

Do-It-Yourself Stories from Customers like You The deflector broke John J. • Lexington , TN • April 22, 2014

Replaced the deflector Read more

Genuine Ge part

Cradle Actuator

By: Ge

Part Number: WR17X3493

Genuine Ge part

Bracket Evaporator Fan Sm.

5.0 (2)

By: Ge

Part Number: WR02X10100

Do-It-Yourself Stories from Customers like You The fan was not working. Donald B. • Laurens , SC • December 17, 2022

I replaced the Evaporator Fan Motor the brackets were rusty so I ordered them. Read more

Genuine Ge part

Ice Crusher Mounting Plate

4.8 (6)

By: Ge

Part Number: WR17X2062

Plate for dispenser.

Do-It-Yourself Stories from Customers like You Rust the plate and auger rusted badly Kenneth R. • Navarre , FL • December 14, 2014

Disassemble, replace, reassemble Read more

Genuine Ge part

Grom/Tube Assembly

By: Ge

Part Number: WR17X3670

Genuine Ge part

Terminal Housing

By: Ge

Part Number: WH12X497

Harness to corset & shifter

Genuine Ge part

Fill Cup

By: Ge

Part Number: WR29X10063

Genuine Ge part

Switch

4.5 (2)

By: Ge

Part Number: WR29X5171

Do-It-Yourself Stories from Customers like You Icemaker would not stop making ice Henry T. • Huntersville , NC • November 23, 2014

Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective. Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this..... Read more

Genuine Ge part

Ice Auger Blade

5.0 (2)

By: Ge

Part Number: WR2X7783

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more