Kenmore Refrigerator 363.58575892 (36358575892, 363 58575892) Parts
Genuine Ge part
By: Ge
Part Number: WR40X1737
$35.95
- Compare At:
-
$44.27
- You Save:
-
$8.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR78X10203
$112.95
- Compare At:
-
$144.77
- You Save:
-
$31.82
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WZ6X136
$3.79
- Compare At:
-
$8.36
- You Save:
-
$4.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR17X3489
Do-It-Yourself Stories from Customers like You
Broken door slide Kathleen S. • Park Rapids , MN • February 04, 2017
Two screws, screwdriver and 5 minutes. Very simple!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR30X256
This is just the bucket.
Do-It-Yourself Stories from Customers like You
Ice maker basket had broken fitting James B. • Rossford , OH • June 22, 2014
Called on Tuesday afternoon and wensday morning the part ordered was delivered. Replaced broken part with new in about 20 minutes. Seems to be working fine.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4550
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
- The ice maker fails to eject ice properly, leading to clogs or jams within the system.
- Unusual noises during the ice-making cycle, which could indicate that the drive cup is not engaging correctly with other components.
- Decreased efficiency in ice production, as the mechanism struggles to operate smoothly.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017
Ordered new auger and installed it and now we have clean ice for our drinks.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8663
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
- Difficulty in opening or closing the ice chute door
- Ice dispensing issues, such as the door not opening when the dispenser is activated
- Cold air leakage from the ice chute area
- Ice buildup on the front of the icemaker
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7213
Do-It-Yourself Stories from Customers like You
The riser cam wore out and failed causing door misalignment Ed B. • San Bruno , CA • November 30, 2016
I emptied door shelves and used plastic sheet to close off refrigerator. The repair was done with refrigerator running. I removed door and changed riser cam and shim. Then replaced door. It took maybe 45 minutes from start to finish. If I did the job again it would be completed in 30 minutes or less. The videos are informative.
Thank You
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10275
Do-It-Yourself Stories from Customers like You
Ice maker door broke Peter L. • Virginia Beach , VA • June 29, 2015
I tried to glue the broken piece back on but had no luck. You had a friendly web site, I found the correct replacement part quickly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3095
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1714
Do-It-Yourself Stories from Customers like You
Fan blade making noise. Stan B. • Savage , MN • October 09, 2018
Changed the washer behind fan blade and it quieted right down.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X252
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
- Mounts on the left wall to support the shelf/cover and provide a smooth sliding track for the drawer
- Keeps the drawer aligned and level for easy in-and-out movement
- Replace when the existing rail is cracked, warped, or missing tabs
- Typical symptoms: drawer hard to open/close, pops off track, shelf tilts or sags, visible damage to the rail
What's included: One left-side slide assembly Install notes:
- Disconnect power and clear the compartment before starting
- Remove the affected drawer and its shelf/cover to access the slide
- Release locking tabs or remove mounting screws; transfer any reusable hardware to the new slide
- Test drawer travel before reloading
Do-It-Yourself Stories from Customers like You
My ice maker bin smelled like freezer burn and ice tasted like it too Nancy R. • New Paltz , NY • November 18, 2014
I bought whole new ice bin and it it's now the ice is great.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR08X10006
Do-It-Yourself Stories from Customers like You
Refrigerator not getting cold at all and everything thawing out compressor clicking Victor F. • West Milford , NJ • June 15, 2015
I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR72X210
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Do-It-Yourself Stories from Customers like You
Shelf in refrigerator needed to be replaced Daniel S. • Jacksonville , NC • September 29, 2018
Ordered parts from appliance parts pros and completed installation myself
Read more
More