Kenmore Refrigerator 363.59492991 (36359492991, 363 59492991) Parts
Genuine Ge part
By: Ge
Part Number: WR2X7783
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
Do-It-Yourself Stories from Customers like You
Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful.
The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger).
Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost).
The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8203
Do-It-Yourself Stories from Customers like You
The refrigertor compressor was making a loud noise when the unit was cycling off Nathaniel J. • Bossier City , LA • January 08, 2017
I ordered a clip retainer which hold the compressor in place. First, I discovered there are four clips and the one which I could easily move or turn by hand I ordered a replacement. The part came fast. In less than two minutes I had completed the repair.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X9246
Genuine Ge part
By: Ge
Part Number: WR02X10173
Genuine Ge part
By: Ge
Part Number: WR02X10411
Genuine Ge part
By: Ge
Part Number: WR11X180
Genuine Ge part
By: Ge
Part Number: WR14X462
Genuine Ge part
By: Ge
Part Number: WR17X10190
Do-It-Yourself Stories from Customers like You
Yellowing of handles and the recess portion of the water/ice dispenser recess Michael S. • Panama City Beach , FL • March 10, 2018
The handles were a simple fix. Just pop out the door trim, which I did by pulling on the very top and bottom of the trim to get it started. Then removed two star screws from the handle. I had to work the chrome plastic top and bottom handle caps off, then reversed the process for installing the new handle.
The Recess/Dispenser was a bit more tricky. I pried the trim and control panel off with a putty knife, then the rest was fairly obvious, such as removing screws and wiring connectors. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10282
Color: Black.
Do-It-Yourself Stories from Customers like You
Ice dispenser door not closing tightly; frost build up in ice chute; mold growing behind ice and water mechanism Terrance A. • Arleta , CA • March 21, 2017
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10366
Do-It-Yourself Stories from Customers like You
Ice bin and auger mechanism. Guillermo Y. • Coral Gables , FL • December 02, 2017
4 screws
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10401
Do-It-Yourself Stories from Customers like You
Broken freezer light shield. Michael F. • Irmo , SC • July 31, 2017
Replaced it... New part fit perfectly and looks great. Easy fix.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2062
Plate for dispenser.
Do-It-Yourself Stories from Customers like You
Rust the plate and auger rusted badly Kenneth R. • Navarre , FL • December 14, 2014
Disassemble, replace, reassemble
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X3166
Genuine Ge part
By: Ge
Part Number: WR17X3838
Genuine Ge part
By: Ge
Part Number: WR17X4153
Color: white. It measures about 7 inches wide by 3 inches deep.
Do-It-Yourself Stories from Customers like You
Faulty water valve spit water from filler when making ice Nick G. • Portola Valley , CA • November 21, 2014
Replaced both the inlet water valve and the water dispenser valve. Replaced water dispenser switch and water filter.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X4204
Do-It-Yourself Stories from Customers like You
Dripping ice maker rusty parts and poorly operating dispenser Don W. • Fulshear , TX • February 03, 2018
I fixed the drip with a bit of silicone. I fixed the rusty parts Auger & End Plate by replacing them. I repaired the dispenser by replacing the defective door.
I used the various videos connected with the parts ( including related parts that I did not replace but required removing them first) to learn and confirm how to properly remove and replace the parts. These were incredibly valuable, Thank You!
Read more
More