Kenmore Refrigerator 363.9512480 (3639512480, 363 9512480) Parts
Genuine Ge part
By: Ge
Part Number: WR2X7783
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
Do-It-Yourself Stories from Customers like You
Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful.
The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger).
Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost).
The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8989
Genuine Ge part
By: Ge
Part Number: WR02X10395
Do-It-Yourself Stories from Customers like You
Water valve and defrost drain tube were bad. Richard W. • Jacksonville , FL • June 24, 2017
Replaced them both.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR07X10011
Do-It-Yourself Stories from Customers like You
Fridge and freezer was warm could hear a clicking sound every few minutes but the compressor wasn't running Chris K. • St. Joseph , MN • November 29, 2014
I took off the cover on the back of the fridge. Then took the small cover off the side of the compressor. Pulled off the relay and shook it and you could hear parts rattling inside. Ordered a repalcement and it's been working since.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR14X245
Genuine Ge part
By: Ge
Part Number: WR14X462
Genuine Ge part
By: Ge
Part Number: WR17X1457
Genuine Ge part
By: Ge
Part Number: WR17X2060
Genuine Ge part
By: Ge
Part Number: WR17X2321
Genuine Ge part
By: Ge
Part Number: WR17X2740
Includes ice auger blade. For blade separately use WR2X7783. Please note Due to manufacturer changes they no longer make the auger as shown (helix coil approx 7 1/2") in the photo. The replacement helix coil is now approx. 5". If you have the original as shown in the photo you must order the complete auger/bucket assembly.
Do-It-Yourself Stories from Customers like You
The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017
Ordered new auger and installed it and now we have clean ice for our drinks.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2760
Do-It-Yourself Stories from Customers like You
First thing i saw was that the ice cubes were coming out with rust although we need iron i prefer a pill Mike E. • El Paso , TX • July 22, 2015
I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X5881
Genuine Ge part
By: Ge
Part Number: WR1X1249D
Genuine Ge part
By: Ge
Part Number: WR1X1515
Genuine Ge part
By: Ge
Part Number: WR1X1547D
The J-nut kit contains multiple threaded fasteners used to secure various internal refrigerator components and shelving systems. Located throughout the refrigerator interior at mounting points, these nuts should be replaced when shelves become loose, components rattle, or existing nuts are stripped or corroded.
Do-It-Yourself Stories from Customers like You
Broken ice maker supporters Frank G. • Colorado Springs , CO • December 21, 2014
I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings).
Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet.
I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1585
Do-It-Yourself Stories from Customers like You
Auger broken front bushing worn out on ice crusher Troy R. • Salem , OR • October 14, 2015
I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new.
Read more
More