Kenmore Refrigerator 363.9512482 (3639512482, 363 9512482) Parts

Genuine Ge part

Shelf Support (Single)

By: Ge

Part Number: WR2X4676

This shelf support secures an interior refrigerator shelf in place so food items stay level and storage remains organized. It replaces a cracked or worn support to restore proper shelf seating and stability. What it does

Holds a refrigerator shelf or shelf trim in the correct position to prevent sagging or tipping
Restores stable support for glass or wire shelving that no longer stays seated
Helps eliminate shelf movement that can cause items to slide or spill
Works where a broken, chipped, or missing support prevents proper shelf alignment

What's included One shelf support Install notes

Disconnect power to the appliance before starting any repair and empty the shelf area
Remove the affected shelf or trim to access the support; reinstall shelf to confirm correct seating
Use basic hand tools as needed and avoid forcing parts to prevent further damage
Replace all affected pieces for consistent shelf alignment

Genuine Ge part

Ice Auger Blade

5.0 (2)

By: Ge

Part Number: WR2X7783

This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.

Do-It-Yourself Stories from Customers like You Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020

This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more

Genuine Ge part

Support Bumper

By: Ge

Part Number: WR2X8989

Genuine Ge part

Pan, Crisper Upper

By: Ge

Part Number: WR32X1221

Genuine Ge part

Tube Drain

5.0 (1)

By: Ge

Part Number: WR02X10395

Do-It-Yourself Stories from Customers like You Water valve and defrost drain tube were bad. Richard W. • Jacksonville , FL • June 24, 2017

Replaced them both. Read more

Genuine Ge part

Relay

5.0 (5)

By: Ge

Part Number: WR07X10011

Do-It-Yourself Stories from Customers like You Fridge and freezer was warm could hear a clicking sound every few minutes but the compressor wasn't running Chris K. • St. Joseph , MN • November 29, 2014

I took off the cover on the back of the fridge. Then took the small cover off the side of the compressor. Pulled off the relay and shook it and you could hear parts rattling inside. Ordered a repalcement and it's been working since. Read more

Genuine Ge part

Gasket Foam

By: Ge

Part Number: WR14X462

Genuine Ge part

Light Shield

By: Ge

Part Number: WR17X1407

Genuine Ge part

Pulley, Time Delay

By: Ge

Part Number: WR17X1457

Genuine Ge part

Ice Dispenser Rod

By: Ge

Part Number: WR17X2060

Genuine Ge part

Recess Dispenser

By: Ge

Part Number: WR17X2321

Genuine Ge part

Dispenser Auger

4.6 (12)

By: Ge

Part Number: WR17X2740

Includes ice auger blade. For blade separately use WR2X7783. Please note Due to manufacturer changes they no longer make the auger as shown (helix coil approx 7 1/2") in the photo. The replacement helix coil is now approx. 5". If you have the original as shown in the photo you must order the complete auger/bucket assembly.

Do-It-Yourself Stories from Customers like You The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017

Ordered new auger and installed it and now we have clean ice for our drinks. Read more

Genuine Ge part

Plate

4.8 (4)

By: Ge

Part Number: WR17X2760

Do-It-Yourself Stories from Customers like You First thing i saw was that the ice cubes were coming out with rust although we need iron i prefer a pill Mike E. • El Paso , TX • July 22, 2015

I took the ice bucket out and saw the Plate and the Auger were rusted out I thought about cleaning it but I figured that the rust prevent coating was probability all gone I've had this refrigerator since 98 , so I figured the best way was to buy the replacement parts . the price was pretty good so I went that route , the taking apart was very easy , its the putting back together that takes time , however I took a video of the bucket before I took it apart and the on-line video that... Read more