Kenmore Refrigerator 363.9644280 (3639644280, 363 9644280) Parts
Genuine Ge part
By: Ge
Part Number: WR24X10231
The Refrigerator Door Gasket is an OEM part for GE refrigerators. This essential component forms a seal around the perimeter of the refrigerator door, ensuring that cold air stays inside and warm air stays out.
Symptoms of a bad Refrigerator Door Gasket include:
- Noticeable gaps or tears in the gasket that allow air to pass through.
- Condensation or frost buildup around the edge of the door.
- The refrigerator running more frequently than usual, indicating a loss of cooling efficiency.
- Difficulty in keeping the door closed or having it pop open.
Causes of a bad door gasket can include regular wear and tear from opening and closing the door, material degradation over time due to exposure to the elements and cleaning chemicals, or physical damage from accidental pulling or stretching.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed a refrigerator gasket for fresh food section of a hot point fridge Michael C. • Presque Isle , ME • September 08, 2014
Watched the repair video you provided on line and it went perfect. really like those videos. this is the second gasket we put in.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Ge part
By: Ge
Part Number: WR23X37285
The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.
A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.
Symptoms of a bad light switch include:
- Interior light not turning on when the door is opened
- Light staying on even when the door is closed
- Flickering or inconsistent light operation
- Difficulty pressing or releasing the switch
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator light switch broken. W W. • Bettendorf , IA • April 20, 2020
I ordered a new switch from APP and fixed my fridge.
However, the video posted for this repair on this site is not applicable to newer refrigerator models.
I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch.
So the correct method to replace the light switch in a newer model refrigerator is as...
Read more
More
$19.03
- Compare At:
-
$20.93
- You Save:
-
$1.90
Genuine Ge part
By: Ge
Part Number: WR2X9391
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
- The refrigerator light not turning on when the door is opened
- Flickering or intermittent light operation
- Visible damage or corrosion on the socket
- The light bulb not fitting securely or falling out
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WR60X187
The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.
You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.
Symptoms of a bad condenser fan motor include:
- The refrigerator not cooling properly
- Unusual noises coming from the back of the refrigerator
- The compressor running hot or cycling on and off frequently
- The condenser coils feeling excessively hot
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer section too warm
-
Noisy
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two Robert P. • King , NC • August 11, 2015
I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of...
Read more
More
$226.48
- Compare At:
-
$269.51
- You Save:
-
$43.03
Genuine Ge part
By: Ge
Part Number: WR32X1455
The Vegetable Pan is an OEM part for GE refrigerators. It is designed to store fresh produce, helping to maintain optimal humidity levels to keep fruits and vegetables fresh for longer periods. The pan fits seamlessly into the refrigerator, providing a convenient and accessible storage solution for your produce.
Causes of a bad vegetable pan can include cracks or breaks due to impact or mishandling, warping from prolonged use, or damage from heavy or improperly stored items. Over time, regular use can also lead to wear and tear, affecting its functionality.
Symptoms of a bad Vegetable Pan include:
- Cracks or visible damage to the pan
- Difficulty sliding the pan in and out
- Produce not staying fresh as long
- Pan not fitting properly in its designated space
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken shelves Frank L. • Norman , OK • January 28, 2025
Replaced
Read more
More
$88.40
- Compare At:
-
$104.31
- You Save:
-
$15.91
Genuine Ge part
By: Ge
Part Number: WR60X114
The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.
Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.
Symptoms include:
- Abnormal sounds like knocking or clunking from inside the walls
- cold spots developing in certain freezer areas
- Higher power bills from inefficient temperature regulation
- Frost or ice patches forming on evaporator coils
This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.
Do-It-Yourself Stories from Customers like You
Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014
I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the...
Read more
More
$17.95
- Compare At:
-
$24.40
- You Save:
-
$6.45
Genuine Ge part
By: Ge
Part Number: WR01X10590
The Screw is an OEM replacement part for GE refrigerators. Countless screws are used throughout the refrigerator to securely hold parts in place.
Symptoms of a bad or missing screw can include:
- Rattling or vibration noises coming from inside the appliance
- Doors or other parts that are no longer properly aligned
- Increased frost or cold air leaks due to compromised seals
Causes may include normal wear and tear over time, accidental damage or loss of a screw during repairs, or improper assembly leaving crucial screws omitted.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.
Do-It-Yourself Stories from Customers like You
Handle broke at screw holes. Thomas B. • Holiday , FL • December 02, 2017
Took about 5 min to replace the handle with the parts ordered. Thank you for the fast service.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Ge part
By: Ge
Part Number: WR9X483
The Defrost Timer is an OEM replacement part for GE refrigerators. It regulates the automatic defrost cycle, which helps maintain optimal cooling and preserving food freshness inside the fridge. The defrost timer controls when the refrigerator exits cooling mode to enter a brief defrost period, preventing the buildup of ice on cooling coils. 10hr/35min timer.
Causes of a bad defrost timer can be normal wear and tear over time, exposure to wet environments, or accidental damage.
Symptoms of a bad defrost timer include:
- Inefficient or inconsistent cooling inside the fridge
- Ice accumulation on refrigerator walls or coils
- Condensation or water pooling in compartments or drawers
- Loud buzzing or clicking noises emitting from the back of the fridge
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Do-It-Yourself Stories from Customers like You
Would not defrost automatically freezer compartment kept freezing up causing frige to not cool Jimmy S. • Jackson , MS • October 26, 2014
Order a new defrost timer from ApplianceParts online. I received the parts in a couple of days, installed it and that completely fixed the problem. Thanks ApplianceParts for such fast, efficient service; and for a part that was very reasonably price, not to mention the ease in finding it on your website by using the model number of my fridge. Couldn't have been easier.
Read more
More
$23.95
- Compare At:
-
$53.58
- You Save:
-
$29.63
Genuine Ge part
By: Ge
Part Number: WR71X10378
The Shelf is an OEM part for GE refrigerators. It provides a stable and durable surface for storing food and other items within the refrigerator. The shelf is designed to fit seamlessly into the refrigerator's interior, maximizing space and organization. It measures approximately 25 inches wide by 14 inches deep.
Over time, the shelf can become damaged due to heavy loads, accidental impacts, or regular wear and tear. If you notice cracks, chips, or instability in the shelf, it is important to replace it to ensure safe and effective storage.
Symptoms of a bad shelf include:
- Cracks or visible damage
- Difficulty in keeping items stable
- Reduced storage capacity due to instability
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ge refrigerator part Sandra G. • Bryant , AR • September 01, 2015
I found AppliancePartsPros.com while surfing the web and made my call; knowing nothing about the site or company. In a nutshell, I do not know if the price I paid for the item was competitive, but the representative I spoke to was extremely knowledgeable; helped me locate the part I needed immediately; and completed the entire transaction in which seemed like 60 seconds. The part arrived 2 days later and was EXACTLY what I needed and a PERFECT match to the other shelves in my refrigerator...
Read more
More
$163.78
- Compare At:
-
$196.54
- You Save:
-
$32.76
Genuine Ge part
By: Ge
Part Number: WR01X10448
This Hi-Lo truss-head screw secures plastic and sheet-metal components in your refrigerator. Replacing stripped or missing fasteners restores a tight, rattle-free fit and keeps brackets, trim, and covers properly aligned.
- Fastens brackets, panels, trim, covers, and other components to the cabinet or liner
- Hi-Lo thread design grips plastic or thin metal for a strong, reliable hold
- Helps address loose or vibrating parts, rattling noises, and misaligned covers
- Direct replacement for a missing, worn, or damaged mounting screw
What's included: 1 screw Installation notes:
- Disconnect power before servicing any appliance
- Support the part being secured to avoid stress or misalignment
- Start the screw by hand to prevent cross-threading; use the correct driver
- Snug firmly but do not overtighten, especially when threading into plastic
Do-It-Yourself Stories from Customers like You
A rail on the drawer for cheese and sandwich meats broke. Patrick A. • Las Vegas , NV • May 02, 2020
Got the part from you in record time. Had it on 5 minutes, the world is back to normal. Thks
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Ge part
By: Ge
Part Number: WR32X10500
Color: white. Measures about 26 inches wide by 20 inches deep.
Do-It-Yourself Stories from Customers like You
Broken glass Timur G. • Madison , WI • August 16, 2015
Bought a new vegetable pan cover from you guys.
Read more
More
$125.67
- Compare At:
-
$148.29
- You Save:
-
$22.62
Genuine Ge part
By: Ge
Part Number: WR1X1794
This Door Spacer positions the refrigerator door components with the correct clearance so the door swings smoothly and sits level. Replacing a worn spacer can restore alignment, reduce rubbing or squeaks, and help maintain proper gasket contact.
- Maintains proper spacing and alignment of the door assembly
- Helps the door open and close smoothly, reducing friction and wear
- Can address issues like door rubbing, squeaking, or not sitting level
- Supports consistent gasket contact for a reliable seal
What's included: Door spacer Install notes:
- Unplug the refrigerator before servicing
- Support the door and remove the necessary hardware to access the spacer location
- Note spacer orientation; install the new spacer and reassemble
- Adjust hinges if needed
Do-It-Yourself Stories from Customers like You
Missing handle and door out of alignment Mike S. • Clinton , IA • April 16, 2015
New Door Handle and the plastic spacers
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WR01X21159
This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.
- Covers the unused door hole created during a door swing reversal
- Helps maintain proper sealing and resists drafts/condensation at the opening
- Restores a clean, finished, factory look to the door
- Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge
Includes: 1 door plug Installation notes:
- Disconnect power before servicing any door components
- Gently pry out the old plug with a plastic trim tool to avoid scratches
- Align the new plug with the opening and press until fully seated and flush
- Verify the door closes properly and the gasket seals evenly
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
Please note: You may also need to order an adapter. For the adapter to convert the male connector from rectangular to oval use part number WR29X10049. Water valve in kit is part# WR57X10033.
Do-It-Yourself Stories from Customers like You
Icemaker stopped working David K. • Haymarket , VA • July 11, 2016
GE bottom freezer icemaker stopped working for the 2nd time. Refrigerator bought in 2008, replaced (first time) icemaker in 2009 by GE tech for $450, after 7 years 2nd ice maker failed I decided to attempt replacing the icemaker myself. Purchased a replacement icemaker that comes as a kit. I replaced the water valve and the icemaker unit with in 30 minutes and I had ice the next day. Easy peasy for less than $140. Thank you ApplianceParts Pros
Read more
More
$170.70
- Compare At:
-
$203.13
- You Save:
-
$32.43
Genuine Ge part
By: Ge
Part Number: WR8X122
Do-It-Yourself Stories from Customers like You
Cooling fan runs but compressor tries to start and kicks out Dave F. • Painesville , OH • November 10, 2015
I read alot of blogs about the same similar symptom, but none described by exact problem. I kept reading how the compressor relay would make a click noise or sisal. I also found out the overload switch could cause a like symptom. The end result being that upon removal of the relay, it was discolored and made a rattling noise when shook. The overload switch was heat cracked on the plastic and looked like it had had enough. This was easily accomplished by using the repair mans print out for the...
Read more
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25