Kenmore Refrigerator 363.9715709 (3639715709, 363 9715709) Parts
Genuine Ge part
By: Ge
Part Number: WR2X7391
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
- Airflow obstructions within the duct
- Noisy vibrations from the fan assembly
- Rubber debris collecting on components
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Do-It-Yourself Stories from Customers like You
Fan chatter. Steven G. • Newtown , CT • August 17, 2018
Remove and replace motor and fan. As expected problem solved.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR24X438
Do-It-Yourself Stories from Customers like You
The gaskets was allowing air to leak out of the freezer Polly A. • Houston , MO • December 05, 2020
I ordered 2 new gaskets, one for the freezer and another for the refrigerator. These arrived within a few days. I soaked both in the bathtub filled with hot water for about 20 minutes. My grandson installed both gaskets without any trouble. I duck taped on the freezer door to allow it to
'seep' with the cold air inside the freezer unit as I was told this would help make a better seal.
I waited 48 hours before removing the tape and opening the door. So far, I'm very happy with my 'new'...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X4550
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
- The ice maker fails to eject ice properly, leading to clogs or jams within the system.
- Unusual noises during the ice-making cycle, which could indicate that the drive cup is not engaging correctly with other components.
- Decreased efficiency in ice production, as the mechanism struggles to operate smoothly.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The problem was the auger was rusted and it came out on the ice Marie L. • Central Square , NY • August 04, 2017
Ordered new auger and installed it and now we have clean ice for our drinks.
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X244D
Do-It-Yourself Stories from Customers like You
Broken drawers Sarah P. • Bronx , NY • January 10, 2016
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2768
Do-It-Yourself Stories from Customers like You
Was broke Chaim H. • Monroe , NY • April 26, 2020
Was replaced.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1714
Do-It-Yourself Stories from Customers like You
Fan motor locked up !!!!! Thomas F. • Canton , GA • March 11, 2020
Ok so my mom called GE and a service man came out. He said no good. The refrigerator was to old to be fixed. You will have to buy a new one .. ok so with that said he collected his $100 dollars service fee !!! I slid the refer out and started tinkering with it. I went on line and hit your web page saw schematic map and ordered fan motor because the one on refer wouldn’t turn !!!! You guys delivered it on a Sunday ( perfect) I put it in carefully and bam it worked. I was in shock that it was...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR29X5153
Genuine Ge part
By: Ge
Part Number: WR2X7238
Do-It-Yourself Stories from Customers like You
Starting to hear strange noises from under and back of the refrigerator suspected it was probably the fan motor Billy S. • Granite City , IL • January 28, 2020
Did some research on Appliance Parts Pros site. Took a chance and ordered the parts I thought were needed. They came in three days. Suspicions confirmed. Relatively easy fix. All went well. Repair videos were especially helpful. Appreciate ease of repair and help from App Parts. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WR1X1763D
Do-It-Yourself Stories from Customers like You
Broken refridgerator meat drawer slides Bruce D. • Chichester , NH • December 14, 2014
Purchased new slides and screws and replaced them both.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X2769
Right hand side. For left hand use WR17X2770. For center use WR17X2768
Do-It-Yourself Stories from Customers like You
The crisper drawer rack on the fridge had broken on one side Frances G. • Hayward , WI • September 24, 2016
Ordered the part from you using your clear part diagram, arrived two days later and crisper was fixed!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR29X5171
Do-It-Yourself Stories from Customers like You
Icemaker would not stop making ice Henry T. • Huntersville , NC • November 23, 2014
Determined from the schematic on the inside of the cover of the icemaker that the likely problem was the "stop" micro switch.... Took the whole thing apart and confirmed the switch was defective.
Replaced it with a standard DPDT switch - for a temporary fix. Went on line to find replacement. Bought it from APP Parts Pros. replaced DPDT switch with micro.. all is well.... saved at least $150 by not having a repair person come to the house - felling good about this.....
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X7783
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
Do-It-Yourself Stories from Customers like You
Ice crusher repair GE Monogram counter depth. Glenn J. • El Cajon , CA • July 27, 2020
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful.
The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger).
Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost).
The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01T10047
Genuine Ge part
By: Ge
Part Number: WR13X587
Genuine Ge part
By: Ge
Part Number: WR13X596
Genuine Ge part
By: Ge
Part Number: WR14X245