Kenmore Dryer 417.82052100 (41782052100, 417 82052100) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131243800
This is a replacement pan-head, locking screw used to secure the top bracket on compatible Frigidaire appliances. It provides a reliable fastener that helps keep the top bracket and panels held firmly in place. What it does:
- Secures the top bracket to the cabinet or chassis to prevent bracket movement or rattling
- Restores proper alignment of top panels and trim that may be loose or sagging
- Uses a locking feature to resist loosening from vibration
- Pan head design provides a low-profile, finished appearance once installed
What's included:
Install notes:
- Use the matching #8-32 driver or bit and tighten until snug; avoid over-torquing to prevent stripping
- Turn off power and remove panels as needed before accessing the bracket area
- Replace only with the same size and thread type to ensure secure fit
- Replace all related screws for even support
Do-It-Yourself Stories from Customers like You
Dial on timer would turn Wesley R. • Birmingham , AL • June 26, 2015
Replacing the timer, timer knob, dial timer,
Read more
More
$11.32
- Compare At:
-
$12.45
- You Save:
-
$1.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131397000
White plastic dome plug insert for dryer. Covers exposed holes on dryer cabinet where pedestal or stacking kit was removed. Replaces missing or broken plugs.
Do-It-Yourself Stories from Customers like You
Plug domes on dryer missing after replacing washing machine that stacks under dryer Lisa W. • Colville , WA • February 28, 2015
I was amazed that I could order these plugs on a Monday, and they showed up at my door Tuesday morning Fed-Ex.
Read more
More
$12.91
- Compare At:
-
$13.71
- You Save:
-
$0.80
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131587400
Control board mounting bracket for dryers. Secures the electronic control board to the dryer frame. Replace if bracket is cracked, bent, or missing.
More
$36.52
- Compare At:
-
$43.46
- You Save:
-
$6.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134019600
$22.25
- Compare At:
-
$24.47
- You Save:
-
$2.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134019610
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134086802
White top panel for dryers. Covers the control area and main housing. Replace when cracked, chipped, discolored, or damaged for a complete exterior refresh.
More
$140.43
- Compare At:
-
$181.50
- You Save:
-
$41.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131474700
Insulation pad that protects components near the dryer heating element. Replace if cracked, burned, singed, or missing to maintain proper heat shielding.
Do-It-Yourself Stories from Customers like You
Broken felt and glide dust bunnies everywhere 10 years of use! Joao T. • Tulare , CA • October 18, 2015
I DID THE BEST I COULD to remove the old parts and prep for the new parts. The Videos were a big help. Maintenance kit came with instructions. I should get many more years of use!
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131992900
Dryer back panel cover that encloses the rear of your dryer cabinet. Replace this panel if cracked, dented, or missing to restore the appearance.
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131663300
$7.07
- Compare At:
-
$7.78
- You Save:
-
$0.71
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131788700
White and gray timer control knob for dryers. Replaces cracked, broken, or missing knobs. Installs on the control panel to operate the timer dial.
More
$48.28
- Compare At:
-
$56.97
- You Save:
-
$8.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131823700
$9.44
- Compare At:
-
$10.38
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131844000
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131846600
$82.41
- Compare At:
-
$98.89
- You Save:
-
$16.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134112300
$7.46
- Compare At:
-
$8.21
- You Save:
-
$0.75
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304492442
$81.95
- Compare At:
-
$90.90
- You Save:
-
$8.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937139
The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer.
Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.
Symptoms of a bad Front Felt Glide Assembly include:
- Unusual noises during operation, such as squeaking or grinding
- The dryer drum may catch or hesitate during rotation
- Increased wear and tear on clothing due to the drum's rough movement
- The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More