Kenmore Dryer 417.84092500 (41784092500, 417 84092500) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131633300
Do-It-Yourself Stories from Customers like You
Heater element broke Bill D. • Portland , CT • December 17, 2015
Replaced heater element, bearing assembly, exhaust tube gasket, and belt. Watched the tutorial video on the website, clearly explained The whole procedure, very easy to do. Great website prices were great and the how-to video was fantastic.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134347700
This small pin secures the program selection knob to the dryer's control panel shaft. Replace if the control knob spins freely without changing settings or falls off the control panel.
Do-It-Yourself Stories from Customers like You
Error code 41 Larry C. • Burkesville , KY • September 25, 2019
The error code said door switch was bad. Ordered one and replaced it, washer repaired. This was after I paid a repairman nearly $400 and did not repair my machine. I will use applancepartspros again.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134472201
Do-It-Yourself Stories from Customers like You
Broken handle Rick H. • Simi Valley , CA • March 13, 2018
Ordered handle, installed.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134471500
Genuine Frigidaire part
By: Frigidaire
Part Number: 134413300
Genuine Frigidaire part
By: Frigidaire
Part Number: 131063700
Secures wiring harness to prevent chafing and maintain safe wire routing in washers, dryers, and laundry appliances. Replace if loose or broken. Check your model for compatibility.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131451600
Do-It-Yourself Stories from Customers like You
Broken and missing parts John M. • Roy , UT • June 07, 2016
Replaced both parts
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131456800
The side discharge tube is a plastic or rubber tube that routes exhaust air or fluid out through the side of an appliance, such as a dishwasher, washing machine, or refrigerator drain system. It directs water or air away from internal components to prevent buildup or damage. Replace this tube if it is cracked, kinked, or leaking, causing water or air to discharge in the wrong location.
Do-It-Yourself Stories from Customers like You
I wanted to reroute the dryer exhaust to the side vs the rear as the space is tight in the area. Glen B. • Van Buren Point , NY • April 19, 2018
I watched the video and ordered the part necessary. The install was a breeze.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131785200
Genuine Frigidaire part
By: Frigidaire
Part Number: 131845801
Do-It-Yourself Stories from Customers like You
Rear drum bearing kit and lint cover Kim M. • St Petersburg , FL • April 16, 2016
Using a utube video that showed the step by step process I was successful (57 year old widow).
The only part I struggled with was the screw threading of the plate and being able to hold and reach the screws at the same time. Other than that it just took me time.
Because the front was off the lint cover was a breeze.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134344900
Do-It-Yourself Stories from Customers like You
Needed leveling feet John H. • Oxford , ME • December 26, 2014
Bought leveling feet from AppliancePartsPros.
When you say "fast shipping" you really mean it! Parts ordered on Sunday arrived Tuesday.
John
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134349400
Genuine Frigidaire part
By: Frigidaire
Part Number: 134382900
Genuine Frigidaire part
By: Frigidaire
Part Number: 134394200
Genuine Frigidaire part
By: Frigidaire
Part Number: 134394400
Genuine Frigidaire part
By: Frigidaire
Part Number: 134408700
This clip is a genuine General Electric part, sold individually. It can be used as a replacement part for a dryer or a washer/dryer combination appliance. This clip affixes the toe panel to the front panel of the dryer.This clip could become damaged within the standard lifespan of a dryer; this damage could take the form of nicks, scrapes, tears, punctures, or erosion to the plastic material that reduces its functionality for a dryer. If the toe panel is coming loose from the front panel of the dryer, the clip should be visually inspected and assessed for signs of damage. If the clip is damaged, it should be removed and replaced with this genuine OEM replacement part. The replacement process is simple and will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This clip is compatible with the following appliance brands: Frigidaire, Kenmore, Electrolux, Westinghouse, and Crosley.
Do-It-Yourself Stories from Customers like You
#1 was the top rank holders on my under counter dishwasher had broken taps #2 the front loader washer machine had broken tabs and the panel was crack! Stanley N. • Longwood , FL • March 28, 2017
#1 Once I received the new taps for the top rank of dishwasher (which fit great) the problem was resolved in minutes.
#2 The pieces arrived in a very short and with the help of my phone conversation/ online fix it course it was a done in a quick time. My only problem that I have very little time to dedicate to the repairs but once started it was easy.
I will use this method to repair my appliance in the future and have referred them to friends and relatives. On the easy, quickness on...
Read more
More