Kenmore Washer Dryer Combo 417.90802991 (41790802991, 417 90802991) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204295
$56.27
- Compare At:
-
$61.90
- You Save:
-
$5.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204357
$45.95
- Compare At:
-
$49.79
- You Save:
-
$3.84
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 3205240
$6.40
- Compare At:
-
$7.04
- You Save:
-
$0.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303300844
$13.95
- Compare At:
-
$14.11
- You Save:
-
$0.16
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303300846
$25.95
- Compare At:
-
$28.01
- You Save:
-
$2.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Electrolux part
By: Electrolux
Part Number: 5304536802
Do-It-Yourself Stories from Customers like You
Leaking drain hose. Richard T. • Saint Charles , IL • November 18, 2017
Replaced drain hose and clamp.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131243700
Do-It-Yourself Stories from Customers like You
The bearing on the dryer drum wore out so bad the ball fell off Thomas J. • Green Bay , WI • October 31, 2016
I replaced the ball and socket connection for the drum. After doing so, I realized that the belt had been stretched and the tension pulley was not putting enough tension on the belt to turn the drum. After ordering a new belt, extra screw that was lost while disassembling the dryer, and some high temperature lubricant for the drum ball and socket the dryer now runs as well as it did when it was new.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937139
The Front Felt Glide Assembly is an OEM part for Frigidaire dryers. This part allows smooth operation of the dryer drum, providing a felt pad that the drum glides on as it rotates. This not only helps to support the drum but also minimizes friction and noise, contributing to the efficient and quiet operation of the dryer.
Over time, the felt portion of the glide assembly can wear down, leading to increased friction between the drum and the dryer's front panel.
Symptoms of a bad Front Felt Glide Assembly include:
- Unusual noises during operation, such as squeaking or grinding
- The dryer drum may catch or hesitate during rotation
- Increased wear and tear on clothing due to the drum's rough movement
- The dryer may take longer to dry clothes efficiently due to the drum's impaired rotation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303279394
The Tub Seal is an OEM part for Frigidaire washing machines. It is designed to create a water-tight seal between the washing machine tub and the transmission or drive system. This seal prevents water from leaking out during the operation of the washer and protects the mechanical components from water damage.
Symptoms of a failing tub seal include:
- Water leaking from the underside of the washing machine.
- Increased moisture or puddles forming under the machine during use.
- A musty or moldy smell, indicating that water has been seeping and not properly drying.
Causes of a bad tub seal can include aging and wear over time, exposure to harsh detergents that degrade the material of the seal, or mechanical stress from unbalanced loads that can cause the seal to fail. It's important to address these issues promptly to prevent further damage to the washing machine.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303283286
The Lower Front Felt Seal is an OEM part for Frigidaire dryers. This seal prevents hot air from escaping the dryer drum, ensuring optimal drying efficiency and preventing heat loss. It also helps reduce noise and vibration during operation.
Causes of a faulty lower front felt seal can include wear and tear over time, damage from foreign objects or excessive heat, or adhesive failure. These factors can result in air leakage, increased drying time, or excessive lint buildup.
Symptoms of a front felt seal may include:
- Air leakage around the dryer door or front panel
- Excessive lint accumulation near the dryer opening
- Unusual noises or vibrations during the operation
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Note: For the Hi-Temp Adhesive, order part number 5308027429. Additional parts to check are the rear drum bearing kit 5303281153 and the front felt glide assembly 5303937139.
Do-It-Yourself Stories from Customers like You
Noisy growling sound. Marks on the clothing Henry K. • Napa , CA • September 21, 2022
Kenmore Dryer Model 41791042000. Replaced the Front Felt Guide Assembly (5303937139) Lower Front Felt Seal (5303283286) Rear Drum Bearing Kit (5303281153) and Dryer Drum Belt. (134503600)
Having performed this same maintenance 5 years ago I was familiar with the process which is fairly straightforward. However, the video for the Front Felt Guide replacement seems to no longer be on the website. Also, the video for the Lower Front Felt Seal is wrong, showing the replacement of some felt seal...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131461200
The Washer Drain Hose is an OEM replacement part for Frigidaire washing machines. It is a flexible, 7 ½ ft plastic hose that connects the washer tub to the household drainage system. The drain hose removes water from the washer at the end of each cycle.
Symptoms of a faulty drain hose include:
- Water failing to fully drain or continuously draining
- Wet flooring around the washer due to leaks
- Excess water left standing in the washer tub after cycles
- Reduced washing performance due to inadequate drainage
Causes of a bad drain hose include kinks or bends that restrict water flow, cracks or holes from wear and tear, and blockages from accumulated debris. These issues can compromise the hose's ability to drain water properly.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaky drain hose Rocco S. • Rochester , NY • February 24, 2017
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131862900
The Idler Pulley is an OEM part for Frigidaire dryers. It helps guide and maintain tension on the dryer drum belt, ensuring the drum rotates smoothly during the drying cycle.
Over time, the idler pulley can wear out due to friction and regular use, or it may become damaged from excessive strain or misalignment. If the idler pulley fails, the dryer drum may not rotate properly, leading to inefficient drying or a complete inability to dry clothes.
Symptoms of a bad Idler Pulley include:
- Squeaking or squealing noises during operation
- The drum not rotating or rotating unevenly
- The belt appearing loose or slipping off the drum
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134418700
The Agitator Hub is an OEM part for Frigidaire washing machines. It connects the agitator to the drive shaft, enabling the agitator to rotate and move clothes effectively during the wash cycle.
Causes of a bad agitator hub can include wear and tear from frequent use, exposure to harsh detergents or hard water, or damage from overloading the washer.
Symptoms of a bad agitator hub include:
- Agitator not moving or rotating properly
- Loud noises or grinding sounds during the wash cycle
- Clothes not being cleaned effectively
- The washer shaking or vibrating excessively
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The agitator was not working John H. • Auburn , NY • October 11, 2016
The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could....
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131545101
The trunnion is the hub that mounts the washer's inner tub to the drive shaft. Replacing a worn hub restores a solid, centered connection so the basket spins smoothly without wobble, slip, or grinding. What it does:
- Secures and centers the spin basket on the drive shaft for balanced rotation
- Transfers drive torque to the inner tub during spin
- Helps maintain basket alignment to reduce vibration
- Typical symptoms of failure: loose/wobbly tub, scraping or grinding noises, poor or no spin, frequent out-of-balance events
What's included:
Install notes:
- Disconnect power and water before service; wear gloves and eye protection
- Access the hub by removing top/access parts, then the agitator/wash plate and inner-tub fasteners
- Clean the shaft and mating surfaces; seat the new trunnion fully and tighten fasteners evenly in a crisscross pattern
- Inspect related parts (tub seal, bolts, bearing) while open and replace if worn; run a short test cycle to ensure smooth spin
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134737100
This is a transmission assembly for washing machines. The transmission assembly is the gearbox in the washing machine's motor that allows the washing machine to work at different speeds and different intensities. If the washing machine is no longer spinning properly and has lost its normal level of washing power, it could mean that the transmission assembly needs to be replaced. Luckily, replacing this part is not as difficult as it might seem at first glance.To replace the transmission assembly, begin by unplugging the washing machine. The first step is to remove the upper control panel. Pull forward on the bottom of the console and remove the two retaining clips as well as the harness connector to the lid switch. Using a flathead screwdriver remove the clips. After this, remove the entire cabinet from the back panel to gain access to the interior of the washer. Remove the 7/16 bolt from the agitator and pull it straight up to remove it from the shaft. Once completed, gain access to the motor and pump and remove by releasing the screws and tabs that attach it. Remove the wire harness attached to the transmission. Remove the bolts that secure the motor mount to the transmission and proceed to pull the old transmission out of its place. Install the new transmission and reassemble the other parts.This genuine OEM replacement part is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse washers. It is sold individually.
Do-It-Yourself Stories from Customers like You
Deffective transmission bearing at the bottom Warren G. • Queens Village , NY • April 13, 2016
Replace with a new assy
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204394
Do-It-Yourself Stories from Customers like You
Missing bleach dispenser. Jim W. • Ardmore , OK • May 12, 2020
Ordered part.
Read more
More