Kenmore Dishwasher 665.13482K901 (66513482K901, 665 13482K901) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10349488
The Screw is an OEM part for Whirlpool dishwashers. It secures the spray arm to the dishwasher, ensuring it rotates properly to distribute water evenly throughout the dishwasher during cleaning cycles.
Common causes of a faulty spray arm screw include wear and tear from regular use, corrosion from exposure to water and detergents, or damage from improper installation or removal.
Symptoms of a bad spray arm screw include:
- The spray arm not rotating or functioning correctly
- Loose or wobbly spray arm
- Unusual noises coming from the spray arm during operation
- Poor cleaning performance due to inadequate water distribution
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The water parts were broken the washer is about 16 years old Katrina M. • Fontana , CA • July 14, 2018
We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302868
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
Do-It-Yourself Stories from Customers like You
Dishwasher door panel was rusting Prashant K. • Fishers , IN • October 11, 2014
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10078215
Color: gray. Measures about 3 inches high by 2-1/2 inches deep.
Do-It-Yourself Stories from Customers like You
The row retainer on the lower wash rack became loose Bill B. • Dallas , TX • May 30, 2015
I ordered a new lower wash rack retainer and installed it myself. Takes about 30 seconds to install. Very easy and no tools required. The part was ordered and arrived two days later from Appliance PartsPros. Very easy job to complete and saved a lot of money over the cost of having to call a repair man and pay a service charge.Just make o note of the position the old part is in and remove and insert the new part.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8580309
The Door Latch Strike is an OEM part for Whirlpool dishwashers. This part ensures that the dishwasher door securely latches when closed, maintaining a tight seal to prevent water leakage during the wash cycle.
Causes of a bad door latch strike include wear and tear from frequent opening and closing of the dishwasher door, accidental impact that can bend or break the strike, or buildup of debris that interferes with proper latching.
Symptoms of a bad door latch strike include:
- Dishwasher door not latching securely
- Water leaking from the door during operation
- Difficulty in closing or opening the dishwasher door
- The dishwasher not starting because the door isn’t properly closed
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Latch did not close properly causing dishwasher not to turn on and run Rani S. • Henrico , VA • March 24, 2020
I ordered this part and switched the previously used one.
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8539102
The Tine Row Holder is an OEM part for Whirlpool dishwashers. It is responsible for securing the tines in the dishwasher's rack, keeping them in place to hold dishes, glasses, and utensils securely during the wash cycle.
Over time, the tine row holder can become damaged due to normal wear and tear, repeated loading and unloading of dishes, or accidental mishandling.
Symptoms of a bad tine row holder include:
- Tines that are loose or fall out of place
- Difficulty in loading dishes securely
- Uneven or inadequate cleaning due to improperly spaced items
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken plastic parts Debbie K. • Manson , WA • March 04, 2017
Ordered and installed new parts. Amazingly fast service and user friendly website.
Read more
More
$53.32
- Compare At:
-
$62.92
- You Save:
-
$9.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268321
This replacement mount secures the dishwasher's upper spray assembly in place, keeping it aligned so it spins freely and delivers consistent water coverage to the upper rack for dependable cleaning performance.
- Holds the up-spray/upper spray arm assembly securely inside the tub
- Maintains proper alignment and clearance for free rotation
- Common symptoms: upper spray arm loose or falls off, poor cleaning on the top rack, rattling from the arm striking the rack or tub, visible cracks in the mount
- Restores stable support after a worn or broken mount
What's included: 1 upper spray arm mount. Install notes:
- Disconnect power and water supply before servicing
- Remove the upper rack for access; release the old mount and transfer the spray arm if attached
- Seat and lock the new mount; verify the upper spray arm spins freely
- Run a short test cycle to confirm proper operation
Do-It-Yourself Stories from Customers like You
Dishwasher: upper wash came off/broke Carl M. • Peoria , AZ • November 08, 2015
Replaced wash arm mount
Read more
More
$53.33
- Compare At:
-
$63.46
- You Save:
-
$10.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177098
The Hex-Head Screw is an OEM replacement part for use in Whirlpool dishwashers. This metal screw measures approximately ¾ inch long. Its primary purpose is to secure the dispenser bracket in place, ensuring stable operation. This hex-head screw is designed for use with compatible hexagonal tools. This makes installation and removal straightforward. This part is sold individually and is guaranteed to fit your dishwasher door panel. This screw is compatible with select Whirlpool brand models including Amana, Crosley, Estate, Inglis, Jenn Air, Kenmore, Kitchen Aid, and Maytag.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$10.41
- Compare At:
-
$12.28
- You Save:
-
$1.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317824
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.
Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.
Symptoms of a bad power cord include:
- The dishwasher not turning on or completing cycles
- Warm or hot power cords during operation
- Frayed, cracked, or exposed copper wiring
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly.
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W10877094
This power cord connects your appliance to a household outlet. Replacing a worn or damaged cord restores safe, reliable power and can help resolve no-power or intermittent power issues caused by a compromised lead.
- Delivers electrical power from the outlet to the appliance
- Replaces cords with cracked, frayed, or heat-damaged insulation or a damaged plug
- Helps when the unit won't power on or loses power when the cord is moved
- Addresses visible scorching, arcing, or melting on the cord or plug
What's included: 1 power cord Install notes:
- Disconnect power before servicing; verify no voltage is present
- Note wire positions or take a photo before removal; match to the same terminals on install
- Use the proper strain relief/clamp and route away from sharp edges, moving parts, and heat sources
- Confirm the ground connection is secure; do not modify the plug
Do-It-Yourself Stories from Customers like You
Portable dishwasher was leaking at sink connection.The insulation was for an installed dishwasher. Carolyn C. • South Chesterfield , VA • May 06, 2023
Replaced the drain & fill lines on a portable dishwasher, now works prefect no leaks. Had to return the insulation blanket it would not fit under the counter for the built-in dishwasher.
Read more
More
$99.95
- Compare At:
-
$117.94
- You Save:
-
$17.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232
Quantity of ONE.
Size: 8-18 x 5/8 inch.
(#8 screw, 18 threads per inch, 5/8 inch long)
Do-It-Yourself Stories from Customers like You
My dishwasher was leaking out copious amounts of water while cycling Michael K. • Oakland , MI • July 11, 2019
While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8575897
This wheel mount assembly fits the dishwasher's upper rack track and provides the roller that lets the rack glide in and out. Replacing a worn or broken mount restores smooth movement and keeps the rack aligned on the rails. What it does:
- Supports and guides the upper rack along the side rails
- Replaces cracked, missing, or seized rollers that make the rack hard to slide
- Helps prevent the rack from popping off the track or sitting unevenly
- Can reduce scraping or squeaking noises when moving the rack
What's included:
- One upper rack wheel mount assembly
Install notes:
- Disconnect power to the dishwasher before servicing
- Open the door and remove the upper rack by releasing the rail stops
- Depress the locking tab to remove the old wheel mount from the rail; align and snap the new assembly into place
- Reinstall the rack and rail stops; check for smooth rack travel
Do-It-Yourself Stories from Customers like You
Upper rack in dishwasher guide wheel broke easy repair after watching video Frank F. • Jefferson Twp , PA • September 29, 2014
Replaced both wheels after watching your video. easy repair
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676455
Color: Grey. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For white use WP676453. For tips use 676458.
Do-It-Yourself Stories from Customers like You
Rusty tips on tops of posts in top and bottom racks of kitchen aid dishwasher James O. • Bedford , OH • July 04, 2016
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure.
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909
Overfill control.
Do-It-Yourself Stories from Customers like You
Washer would not fill with water Ty J. • Hillsboro , OR • July 08, 2018
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem.
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676453
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
$30.95
- Compare At:
-
$37.14
- You Save:
-
$6.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572618
Seal included. This sump housing assembly includes a 32.17 millimeter hole for the thermistor. If the hole for the thermistor is 31-31.5 millimeters you will need to order WP8534882.
Do-It-Yourself Stories from Customers like You
Leaking sump housing Allen G. • Elkhorn , NE • January 15, 2016
I noticed the floor around the dishwasher was starting to get wet and warp the wooden floor. The chopper had gotten out of line and had cut a pinhole into the sump housing and the dishwasher was leaking badly. It was quite easy to repair. Just unhook the drain hose and the wire connectors, twist off the turbidity sensor and waste motor, pull out the shims and the whole assemple comes up and out. The hardest part was pulling the motor off of the assembly, since I wasn't sure if I needed to...
Read more
More
$129.26
- Compare At:
-
$152.53
- You Save:
-
$23.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531857
This inlet protector is the coarse screen that covers the dishwasher's pump/sump inlet, blocking large debris from entering the wash system. Replacing a damaged or missing protector helps maintain water flow and protect the pump from jams or wear.
- Screens large food particles and debris from the pump/chopper inlet
- Helps maintain proper water circulation and consistent cleaning performance
- Reduces risk of pump damage or noisy operation from debris
- Common signs: cracked or missing screen, persistent debris in the sump, grinding/rumbling noises, or declining wash results
What's included: 1 inlet protector Install notes:
- Disconnect power and shut off water supply before servicing
- Remove the lower rack and spray arm; access the sump/accumulator area per your model
- Lift out the old protector; seat the new protector fully and secure any tabs/fasteners
- Reassemble and ensure the screen sits flat with no gaps
Do-It-Yourself Stories from Customers like You
Clogged at the chopper assembly strange noisehopper assembly broken Thomas H. • Idaho Falls , ID • July 07, 2015
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ...
Read more
More
$78.57
- Compare At:
-
$94.74
- You Save:
-
$16.17