Kenmore Dishwasher 665.1584990 (6651584990, 665 1584990) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3370964
Fix a dishwasher door that won't stay closed or latch properly with this latch bolt. Simple repair takes about 15 minutes with basic hand tools.
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3376848
Fix poor cleaning on bottom rack with this lower spray arm assembly. Restores water circulation across dishes. DIY-friendly repair for dishwashers.
More
$60.61
- Compare At:
-
$72.73
- You Save:
-
$12.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8562003
$31.40
- Compare At:
-
$38.47
- You Save:
-
$7.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8528351
$46.35
- Compare At:
-
$54.69
- You Save:
-
$8.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369464
Dishwasher lever component that controls or actuates internal mechanisms. Replace if broken, cracked, or worn to restore proper door or latch operation.
More
$3.45
- Compare At:
-
$4.46
- You Save:
-
$1.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369504
$5.76
- Compare At:
-
$6.80
- You Save:
-
$1.04
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268828
This small cupshelf is the replacement door shelf insert that restores secure storage for cups, glasses and small items in your refrigerator door. It helps organize the door and prevents items from shifting or falling. What it does:
- Replaces a cracked, broken or missing small cupshelf to restore door storage capacity
- Supports cups, small glasses and lightweight containers on the refrigerator door
- Helps keep items organized and prevents sliding when the door opens or closes
- Matches OEM fit and mounting points when used as the specified replacement part
What's included:
Install notes:
- Remove items from the door and lift out the old shelf; align tabs and snap the new shelf into the existing door mounts
- No special tools are typically required; handle carefully to avoid damaging door trim or mounting tabs
- Always follow refrigerator power/safety guidance from the manufacturer when working near controls or lights
More
$68.95
- Compare At:
-
$82.74
- You Save:
-
$13.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP719576
This lower wash arm bearing keeps the dishwasher's lower spray arm turning smoothly so dishes get even water coverage. It replaces a worn bearing to reduce noise and restore proper spray-arm rotation. What it does:
- Supports the lower spray arm so it can spin freely during cycles
- Helps maintain even water distribution for better cleaning
- Reduces grinding or scraping noises caused by a worn bearing
- Prevents wobbling or misalignment of the lower spray arm
What's included: Bearing as shown Install notes:
- Disconnect power and shut off the water supply before starting any repair
- Inspect the spray arm and mounting surfaces for damage; clean before installing the new bearing
Do-It-Yourself Stories from Customers like You
Leaking from the pump motor. Kevin H. • Phoenix , AZ • March 15, 2018
After discovering that these parts were not the problem. I found replacements for the impeller online and replaced those parts plus these parts. Disassembly was difficult and one bolt inside of the motor shaft had to be drilled out. Other than that, these replacement parts were an exact fit and the video on your page made the replacement no problem.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318273
The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.
Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.
Symptoms of a bad door switch include:
- Dishwasher not starting
- Dishwasher stopping mid-cycle
- Error codes related to door issues
- Dishwasher running with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The door latch would not catch as a result i was unable to use my dishwasher Joel C. • Shreveport , LA • January 09, 2016
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 717000
Seals the pump housing to prevent water leaking from the tub onto the motor. Replace if you see leaks around the circulation pump area. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Leaks from around the door and from the pump motor Samuel M. • Sudbury , MA • January 12, 2016
1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10102498
Do-It-Yourself Stories from Customers like You
Replaced float and float switch Roland B. • Smithtown , NY • May 21, 2016
Very easy to repair. All the parts fit perfect. Entire repair took 20 mins.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3380595
This clip secures the dishwasher rack in place and prevents it from sliding too far forward when pulled out. It attaches to the rack rail system to create a stopping point for safe rack operation. Replace this clip when your dishwasher rack slides out completely or doesn't stay properly positioned in the dishwasher.
Do-It-Yourself Stories from Customers like You
Would not drain Thomas W. • Las Vegas , NV • September 12, 2015
Called appliance parts pro
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP302709
Do-It-Yourself Stories from Customers like You
Dishwasher didn't drain Frank C. • Mcallen , TX • June 02, 2016
Cleared out trash from pump.
Made E-Z by your exploded views and videos. Replaced worn parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374010
Color: Black. Other colors: For white use 3374011, for almond use 3374012.
Do-It-Yourself Stories from Customers like You
Part missing when i bought it Mike F. • Cedar Rapids , IA • October 23, 2015
Replaced part, took about 2 minutes to install. Part fit great.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3379920
Genuine Whirlpool part
By: Whirlpool
Part Number: 3371569