Kenmore Compactor 665.7342300 (6657342300, 665 7342300) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 882699
Replace your trash compactor's broken or stripped drive gear assembly. Includes gears, shafts, and components that transfer motor power to the ram mechanism.
This part fixes the following symptoms
-
Compactor ram gets stuck
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Fractured drive gear Keith S. • Warrenton , VA • February 09, 2016
The compactor failed with the ram down, so the drawer wouldn't open which in turn made the mounting brackets inaccessible. This necessitated sliding a thin oscillating saw blade between the cabinet face frame and the counter top to cut through the brackets. It was then possible to roll the unit out and place it on its side. I removed the five screws holding the bottom pan in place, dropped the pan exposing the gear/chain train. The large gear was cracked from shaft out to the edge. One of...
Read more
More
$77.76
- Compare At:
-
$91.76
- You Save:
-
$14.00
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130
The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.
Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.
Symptoms of a bad Front Leveling Foot include:
- The washing machine rocking or wobbling during operation
- Increased vibration and noise
- The washer being unlevel, affecting wash performance
- Difficulty in adjusting the foot
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS...
Read more
More
$6.41
- Compare At:
-
$7.63
- You Save:
-
$1.22
Genuine Whirlpool part
By: Whirlpool
Part Number: 675382
Compactor won't turn on or stay running? This rotary switch kit controls power and operation. DIY-friendly repair in about 30 minutes with basic tools.
This part fixes the following symptoms
-
Won't start
-
Doesn't stop at end of compacting cycle
See more...
Do-It-Yourself Stories from Customers like You
Broken start switch on trash compactor John Z. • Charleston , WV • November 21, 2015
Original part was not available. Did some cross referencing and found s similar part
Read more
More
$97.58
- Compare At:
-
$116.12
- You Save:
-
$18.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 882688
Dual roller assembly for trash compactor drawer glide system. Replace when rollers are worn, cracked, or drawer slides hard. Installs on compactor base.
Do-It-Yourself Stories from Customers like You
My 30 year old whirlpool trash compactor roller bearings are "worn out"! L H. • Villa Grande , CA • January 17, 2015
Bot both sets of roller bearings, lower ones on the appliance and the set on the trash can that rolls out. I just followed the instructions that were in the roller bearing package and only needed the tools that are recommended. Was a little tricky with the nuts, really need a person with "small" fingers to reassemble the nuts back on the lower set of bearing that are on the appliance. All in All, went well and works. Found that the new bearings are v. tight on the machine, being new, so, use...
Read more
More
$22.41
- Compare At:
-
$26.89
- You Save:
-
$4.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W10439651
The Drive Motor is an OEM part for Whirlpool washing machines. This part powers the agitator and spinning the drum, facilitating the various cycles of the washing machine to ensure clothes are thoroughly cleaned.
Causes of a bad drive motor can include general wear and tear over time, overheating, electrical issues, or mechanical failures within the motor components.
Symptoms of a bad Drive Motor include:
- Washing machine not agitating or spinning
- Loud or unusual noises during operation
- Burning smell coming from the motor
- Washer stopping mid-cycle or not starting at all
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
25 year old trash compactor motor quit working Robert O. • Pace , FL • May 18, 2014
Replaced the motor with a direct replacement part. The wiring was not the same because the switch on the motor was different. The instructions that came with the motor were enough for me to figure out what to do.
Read more
More
$201.50
- Compare At:
-
$237.77
- You Save:
-
$36.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828
The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.
Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.
Symptoms of a bad washer lid screw include:
- The washer lid feeling loose or wobbling
- Difficulty in opening or closing the lid
- Visible rust or corrosion on the screw
- The lid not staying securely in place
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool cabrio washer cracked lid (model wtw7800xw2) Mike M. • West Hartford , CT • November 29, 2016
I just replaced the glass lid and broken plastic frame with the all metal one.
Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016):
1 lid part number WP8572026 (AP6013408) for $119.81
2 hinges WP8563964 (AP6004844) for $6.17 each
4 screws WPW10119828 (AP6015313) for $1.97 each
Total $140.03 plus $8.95 shipping, grand total $148.98
Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The...
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9871602
Replacement roller bearing for trash compactor drawers. Installs on tracks to support smooth gliding. Replace worn or damaged bearings for easier operation.
Do-It-Yourself Stories from Customers like You
My 30 year old whirlpool trash compactor roller bearings are "worn out"! L H. • Villa Grande , CA • January 17, 2015
Bot both sets of roller bearings, lower ones on the appliance and the set on the trash can that rolls out. I just followed the instructions that were in the roller bearing package and only needed the tools that are recommended. Was a little tricky with the nuts, really need a person with "small" fingers to reassemble the nuts back on the lower set of bearing that are on the appliance. All in All, went well and works. Found that the new bearings are v. tight on the machine, being new, so, use...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Whirlpool part
By: Whirlpool
Part Number: 675351
For use on power screw and ram pressure pads. Size: 4 oz. can.
Do-It-Yourself Stories from Customers like You
Element burnt out Sonya B. • Cheney , WA • December 11, 2016
Replace element
Read more
More
$50.31
- Compare At:
-
$59.67
- You Save:
-
$9.36
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917043
Supports the rotating shaft in your trash compactor, reducing friction for smooth operation. Replace if you hear grinding noise or the ram sticks.
Do-It-Yourself Stories from Customers like You
Spider bearing failed and the chain locked, which caused the big gear to break on my GE trash compactor. Kelly G. • Heber Springs , AR • January 25, 2020
Replaced all damaged parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP776356
Size: 3\8-24 inch.
Do-It-Yourself Stories from Customers like You
Trash compactor one roller was missing and the handle cracked several times had been super glued too often Thomas N. • Hill Country Village , TX • January 28, 2020
After I was shocked at the price to replace the trash compactor, I was happy to find that the parts, both front & back rollers and the handle, were available from AppliancePartsPros.com. They arrived as scheduled and after viewing two videos, the job went very smooth. I hope it puts another 27 years life into the unit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 675379
This door lock latch assembly secures the washer door during operation so cycles can run safely and water stays contained. It replaces a worn or damaged latch to restore proper door locking and cycle start. What it does
- Secures and locks the washer door during wash and spin cycles so the appliance can operate normally.
- Triggers the door-closed sensor/switch that allows the washer to start and continue a cycle.
- Helps prevent accidental door opening and reduces the risk of leaks during operation.
- Common symptoms indicating this part may be needed: washer won't start, door won't latch or lock, or the latch feels loose or broken.
What's included One door lock latch assembly. Install notes
- Always disconnect power to the appliance before inspecting or replacing the door lock latch.
- Handle the door and glass carefully to avoid damage; align the latch with the strike before tightening fasteners.
- After installation, test a short cycle (no clothes) to ensure the door locks and the washer starts properly.
More
$75.40
- Compare At:
-
$89.73
- You Save:
-
$14.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9870975
Left side frame slide for trash compactors. Replaces cracked, broken, or worn slides that support the compactor drawer. Essential structural component.
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP776036
Fix parts sliding off shafts or shifting during compaction. This C-ring snaps into grooves to secure components and prevent axial movement in your compactor.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 775481
This precision thrust race serves as the hardened bearing surface for axial loads in a rotating mechanism. Replacing a worn race reduces friction and noise, helping restore smooth, consistent motion and protect companion thrust bearings and washers from accelerated wear.
- Provides the hardened bearing surface for a thrust bearing assembly
- Supports axial load and helps maintain proper end-play in the mechanism
- Reduces friction to allow smoother rotation under load
- Wear may present as grinding/scraping noises, rough or binding motion, excessive axial play, or visible scoring
What's included: 1 thrust race Installation notes:
- Disconnect power and shut off water/gas before servicing
- Access the thrust-bearing area; note the order and orientation of races, bearings, and washers for reassembly
- Clean mating surfaces; replace any worn companion parts and lubricate only if specified by the service documentation
- Seat the new race fully and verify free movement by hand before reassembly and testing
Do-It-Yourself Stories from Customers like You
Spider bearing failed and the chain locked, which caused the big gear to break on my GE trash compactor. Kelly G. • Heber Springs , AR • January 25, 2020
Replaced all damaged parts.
Read more
More
$37.41
- Compare At:
-
$44.52
- You Save:
-
$7.11
Out Of Stock
Usually ships within 4 - 14 days