Kenmore Range 665.75842004 (66575842004, 665 75842004) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400882
This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.
- Provides machine-thread fastening for panels, brackets, and internal parts
- Helps eliminate rattling, vibration, and loose fits
- Restores proper attachment when the original screw is stripped, missing, or corroded
- Used wherever an 8-32 screw is specified in the service manual or parts list
What's included: One screw
- Disconnect power to the appliance; turn off gas/water if applicable
- Match the screw to the original location to confirm size and thread
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten to prevent stripping or cracking
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3195097
This panel forms the floor of the oven, sitting above the bake element or burner to shield it from spills and provide a smooth, stable surface. Replace a warped or damaged panel to help maintain proper heating and easier cleanup. What it does:
- Forms the oven floor above the bake element or burner
- Shields the heat source from drips and debris to help prevent scorching and odors
- Supports designed airflow and heat distribution in the cavity
- Common replacement signs: warped or dented panel, rust or chipped finish, smoke/odors from spills beneath the panel, or uneven baking results
What's included:
Install notes:
- Disconnect power (and shut off gas supply for gas ranges) before servicing; allow the oven to cool completely
- Remove oven racks; release front fasteners or clips and lift the old panel out of the rear tabs (method varies by model)
- Seat the new panel into rear tabs, align the front edge, and secure as originally installed
- Verify the panel sits flat and clear of the bake element or burner before reassembling
Do-It-Yourself Stories from Customers like You
Small pieces of aluminum foil had melted onto the floor of my oven Maureen G. • Lyndhurst , OH • May 09, 2015
I purchased a new oven floor!! It only took me 15 minutes to get the other floor out & then place the new floor into position. There were only 2 screws.
Read more
More
$103.31
- Compare At:
-
$122.94
- You Save:
-
$19.63
Genuine Whirlpool part
By: Whirlpool
Part Number: 8190618
Oven won't ignite or clicks but doesn't light? This bake burner with spark igniter fixes grounding issues and ignition failures. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Oven shuts off in the middle of baking Steven S. • Wenonah , NJ • May 11, 2015
Replaced igniter under oven floor panel.
Read more
More
$151.95
- Compare At:
-
$180.82
- You Save:
-
$28.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY706189
Self-tapping screw used in range assembly. Features 8-18 thread size and 0.375 inch length. Also used in some washer models as cross-appliance hardware.
Do-It-Yourself Stories from Customers like You
Drum baffle broke off James H. • Etna , OH • March 21, 2017
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196175
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP179051
Replacement 10-32 machine screw for securing panels, brackets, and internal components. Ideal for replacing missing, stripped, or damaged hardware.
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10293048
Range oven won't ignite or heat? Gas valve controls gas flow to burners. Common fix when igniter sparks but no flame appears. 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
Everything worked on stove except oven Felix G. • Beach Park , IL • March 07, 2016
I know absolutely nothing about fixing appliances, nothing. So I googled and found this site and narrowed it down to 1 of three parts (totaling about $550). I tried the first two and with no luck I almost gave up thinking I didn't know what I was doing and better off buying a new stove. For the last part I had to dissemble more and thought I was getting over my head, guess what? The oven worked!!! The part I needed was only $150 and saved money on labor and who knows what what else. Just to...
Read more
More
$316.95
- Compare At:
-
$377.17
- You Save:
-
$60.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053834
Replace cracked, shattered, or broken outer glass on your range oven door. This front glass panel installs between the door frame and trim pieces.
Do-It-Yourself Stories from Customers like You
Broken oven door glass and trim Heidi A. • Topeka , KS • December 05, 2014
Replaced glass and trim
Read more
More
$153.66
- Compare At:
-
$181.32
- You Save:
-
$27.66
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
Broken indicator light lens? This red lens covers the control panel light opening, restoring visibility and protection. Easy DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
The indicator light for the burner was broke John V. • Liberty , TX • March 26, 2016
I ordered a red lens and replaced it
Read more
More
$8.56
- Compare At:
-
$10.10
- You Save:
-
$1.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807
Replaces broken or worn oven door hinges on ranges. Installs inside the door frame to support proper opening and closing. Sold individually.
Do-It-Yourself Stories from Customers like You
The oven door would not close completely William R. • Emporia , KS • July 27, 2016
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up...
Read more
More
$77.76
- Compare At:
-
$91.76
- You Save:
-
$14.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196174
10-32 machine thread screw secures brackets, panels, and trim inside ranges and washers. Replace missing, stripped, or damaged fasteners to restore alignment.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
Adjustable front leveling leg threads into the base corner of your range to raise or lower the unit. Replace if broken, cracked, or missing to level your range.
Do-It-Yourself Stories from Customers like You
Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023
Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled.
Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly.
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9757218
Controls gas flow to your range's top burner. Replace if the valve stem breaks, knob won't turn, or gas won't adjust properly for simmering or boiling.
Do-It-Yourself Stories from Customers like You
The stem of the burner valve broke off Marcello A. • Bellerose , NY • December 31, 2016
I searched on your website for a replacement stem. Unfortunately the stem is not sold separately. I purchased the entire valve after confirming with your online rep that I was ordering the correct part. I received the valve in 2 days removed the stem and inserted it directly into the existing burner valve. Perfect fit easy installation and burner works as it should. Simply repair and I probably saved $100 by not calling a repair tech to come to my home.
Read more
More
$148.72
- Compare At:
-
$176.98
- You Save:
-
$28.26