Kenmore Range 665.95776890 (66595776890, 665 95776890) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491985
The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.
There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.
Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Oven door outer glass was broken Slydell B. • Cape Coral , FL • November 26, 2014
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10058460
The Leveling Leg is an OEM part for Whirlpool ranges. It's designed to ensure your range is perfectly balanced and stable on uneven floors. By adjusting the height of the leveling legs, you can prevent wobbling and ensure that your cooking surface is perfectly horizontal, which is critical for even cooking and baking.
Causes of a malfunctioning Leveling Leg can stem from physical impact damage, corrosion in humid conditions affecting integrity and adjustability, and wear over time, particularly if frequently adjusted or cleaned aggressively.
Symptoms of a bad Leveling Leg include:
- The range tilts or wobbles, making cooking uneven.
- Difficulty sliding pots and pans across the cooking surface due to the appliance not being level.
- Increased strain on other components of the range, which could lead to premature wear or failure.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Anti tilt bracket for stovetop oven Richard O. • Levittown , PA • October 11, 2019
Installed it according to video watched.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196164
The Screw is an OEM part for Whirlpool appliances that is responsible for securing various parts in place. The screw ensures a tight and secure fit, preventing any loose parts. A bad screw can occur due to wear and tear or accidental damage. If the screw becomes stripped, rusted, or lost, it can lead to instability or even malfunction of the affected parts.
Symptoms of a bad screw include:
- Loose or wobbly parts.
- Components not securely fastened.
- Difficulty in assembling or disassembling the appliance.
- Rattling or unusual noises during operation.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Replaced broken oven door handle Peter R. • Baltimore , MD • January 25, 2015
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws...
Read more
More
$8.36
- Compare At:
-
$9.86
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400882
This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.
- Provides machine-thread fastening for panels, brackets, and internal parts
- Helps eliminate rattling, vibration, and loose fits
- Restores proper attachment when the original screw is stripped, missing, or corroded
- Used wherever an 8-32 screw is specified in the service manual or parts list
What's included: One screw
- Disconnect power to the appliance; turn off gas/water if applicable
- Match the screw to the original location to confirm size and thread
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten to prevent stripping or cracking
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Screw for side trim.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196175
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven drawer wouldn’t slide properly. Nick B. • Hanover , MD • November 09, 2020
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP179051
This 10-32 machine screw secures panels, brackets, and internal assemblies in your appliance. Replacing missing or stripped hardware restores a tight, rattle-free fit and helps keep components properly aligned.
- Provides a threaded fastener for metal-to-metal connections
- Helps maintain correct alignment of panels, brackets, and housings
- Replaces missing, rusted, or stripped screws
- Symptoms include loose or vibrating panels, gaps/misalignment, or hardware that won't tighten
What's included: 1 screw Install notes:
- Disconnect power (and shut off gas/water, if applicable) before servicing
- Match the 10-32 thread and length to the original screw for the location
- Start by hand to avoid cross-threading; tighten snugly without over-torquing
- Retain and reinstall any original clips, spacers, or washers used in your model
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$8.36
- Compare At:
-
$9.86
- You Save:
-
$1.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10107820
Includes lock latch motor and switch
This part fixes the following symptoms
-
Door won't open after self cleaning cycle
See more...
Do-It-Yourself Stories from Customers like You
Range would not go into self clean. Gary S. • Keene , VA • April 04, 2014
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch...
Read more
More
$127.40
- Compare At:
-
$152.88
- You Save:
-
$25.48
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3195546
Oven broiler drawer glide mounts to front of the drawer. For the rear drawer glide that mounts to the body order WP8053334.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807
This hinge is for painted door only. For stainless steel door use WP8272822.
Do-It-Yourself Stories from Customers like You
The oven door would not close completely William R. • Emporia , KS • July 27, 2016
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up...
Read more
More
$75.63
- Compare At:
-
$90.00
- You Save:
-
$14.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.
- Covers and diffuses the indicator light for clear visibility
- Fills the control panel opening for a finished, factory appearance
- Helps shield the opening from dust, splashes, and contact
- Common fixes: cracked, missing, loose, or discolored indicator lens
What's included: 1 red indicator light lens Install notes:
- Disconnect power by unplugging the appliance or switching off the breaker before servicing
- Access the control panel/backguard per your model's instructions
- Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
- Restore power and verify the indicator light is visible through the lens
Do-It-Yourself Stories from Customers like You
The oven off button didn't work so I had to trip the breaker to shut it off Dave C. • Cape Coral , FL • January 22, 2024
Replaced the switch membrane.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8203546
This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.
- Connects the supply conductors to the unit's internal wiring
- Provides insulated posts to securely fasten and distribute power
- Helps maintain tight, low-resistance connections
- Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker
What's included: 1 terminal block Install notes:
- Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
- Photograph or label wire positions to ensure correct reassembly
- Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
- Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed
Do-It-Yourself Stories from Customers like You
Bad terminal block Michael M. • Ronkonkoma , NY • June 29, 2015
Replaced it with the part I got from you.
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
- Threads into the base at the front corner to raise or lower the unit for accurate leveling
- Stabilizes the appliance to minimize rocking and vibration when opening the door or using the cooktop
- Restores proper adjustment when the original foot is stripped, bent, or missing
- Common signs include a wobbling appliance, difficulty leveling, or metal-to-floor contact/scuffing
Includes: 1 front leveling leg. Install notes:
- Disconnect power; turn off the gas supply
- Protect the floor and use an assistant to carefully slide and tip the appliance
- Start the new leg by hand to avoid cross-threading; finish adjustment with a wrench
- Level front-to-back and side-to-side, then verify stability before restoring service
Do-It-Yourself Stories from Customers like You
Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023
Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled.
Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly.
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196174
This machine-thread screw secures brackets, panels, and trim inside your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces rattles, and keeps assemblies properly aligned. What it does:
- 10-32 machine-thread screw used to fasten metal components
- Maintains alignment and stability of panels, brackets, and trim
- Replace if threads are stripped, head is damaged, corroded, or missing
- Common symptoms: loose panel/handle, vibration noises, gaps or misalignment
What's included:
Install notes:
- Disconnect power (and gas, if applicable) before servicing
- Support the component and start threads by hand to avoid cross-threading
- Use the correct driver; do not overtighten to prevent stripping
- Match thread size and length specified for your model
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 814381
Kit includes 4 pins.
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More