Kenmore Range 790.46992103 (79046992103, 790 46992103) Parts

I replaced the ball and socket connection for the drum. After doing so, I realized that the belt had been stretched and the tension pulley was not putting enough tension on the belt to turn the drum. After ordering a new belt, extra screw that was lost while disassembling the dryer, and some high temperature lubricant for the drum ball and socket the dryer now runs as well as it did when it was new. Read more

Bought one from your company. Very good service Read more

Replaced the Controller (mother board). I previously replaced the temperature probe (316217002) but that did not resolve the problem. Replacing the Controller (318185446 / AP3583606) was much easier and quicker than replacing the probe. Simply remove the 6 or 8 screws that secure that range top and the top lifts easily exposing the Controller. There are only 4 electrical connections that easily unplug and reattach. Although the new board has more connection points, they are similarly labeled... Read more

Opened oven door to the fully opened position. Pulled up the the lock located on both hinge supports and engaged it in the hook of the hinge levers. You may need to apply a little downward pressure on the door to pull the locks fully over the hooks. In addition, you may need to use a flat head screwdriver to "help" engage the hinge locks over the hook. Hold the door securely on both sides (not the door handle). Pulled the bottom of the door up and toward me to disengage the hinge supports.... Read more

• Element will not heat

It was a little tricky. I watched a video it helped a little . Took the door apart, that was the easy part, BUT putting it back, could not remember sequence of parts. I would suggest take a picture of each piece as you remove them that would help. Read more