Kenmore Range 790.79613800 (79079613800, 790 79613800) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935066
Oven won't light or ignites with a loud pop? A faulty igniter is usually the cause. Simple DIY fix—disconnect two screws and wire nuts to replace.
This part fixes the following symptoms
-
Gas smell
-
Gas igniter glows, but will not light
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven would not light Jean B. • Pass Christian , MS • June 22, 2014
My Tappan Range, which I paid a grand total of $65.00 for, and have been using since Katrina, (Katrina in 2005 is how we measure time in South Mississippi.) I live in an old house, and I am old, too. Last winter was the coldest I can remember, and my husband (older than I and far more hard-headed) used the oven like a heater. I read all user's manuals, because I use only used stuff, I can download the manuals or read them online, and it clearly stated in there NOT to use the oven as a...
Read more
More
$45.30
- Compare At:
-
$64.70
- You Save:
-
$19.40
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304503232
Inner door glass panel for range and wall oven doors. Replace if cracked, shattered, or slipped out of position. Installs between outer glass and oven cavity.
Do-It-Yourself Stories from Customers like You
We shattered the interior window of our oven Jason C. • Seattle , WA • December 02, 2014
I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new.
Read more
More
$83.44
- Compare At:
-
$99.29
- You Save:
-
$15.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 316240600
Secures the ignitor assembly to your gas cooktop burner base. Replace if screw head is stripped, threads damaged, or screw is missing after disassembly.
Do-It-Yourself Stories from Customers like You
Slow to ignite Matthew F. • East Peoria , IL • October 07, 2019
It took a little longer then I was hoping but wasn’t terrible. If the burner is very old at all make sure to get the new screws. Both of mine snapped when trying to remove them. The new one works great.
Read more
More
$16.75
- Compare At:
-
$19.77
- You Save:
-
$3.02
Genuine Frigidaire part
By: Frigidaire
Part Number: 316540900
The Screw is an OEM part for Frigidaire ranges and cooktops. This part secures the burner head in place, ensuring proper alignment and functioning of the burner.
Causes of a bad burner head screw can include loosening due to repeated heating and cooling cycles, damage from impact or mishandling, or simply wear and tear over time.
Symptoms of a loose or missing burner head screw include:
- Uneven or irregular flame pattern on the burner
- Burner head not sitting flush or properly aligned
- Burner head wobbling or moving during use
- Potential gas leaks if the burner head is not securely fastened
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ignitor failed / screw that attached burner to ignitor stripped Michael M. • Roundhill , VA • May 17, 2015
Ordered new Ignitor / Orifice and screws
Mike was a great resource, he helped me thru the project.
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505695
Gas burners won't ignite? A faulty spark module may be the issue. This part sends electrical current to igniters. DIY-friendly, takes minutes.
Do-It-Yourself Stories from Customers like You
Gas oven won't light Robert P. • Randleman , NC • October 11, 2015
Watched repair video's to learn where parts were located. Put replacement in and it worked great!
Read more
More
$55.30
- Compare At:
-
$65.25
- You Save:
-
$9.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504202
Oven displaying probe error or reading temperature when unplugged? This meat probe monitors internal food temperature. Easy DIY replacement part.
Do-It-Yourself Stories from Customers like You
My original probe lasted only a few times Elizabeth R. • Gay , WV • December 26, 2014
Ordered a replacement for defective part. Very happy with the shipping. Very quick. And the price was very fair.
Read more
More
$80.40
- Compare At:
-
$94.87
- You Save:
-
$14.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 318601500
The Control Switch is an OEM part for Frigidaire ranges. This part regulates the heat output of the range's burners. By turning the control knob, users can adjust the temperature to their desired level, ensuring precise cooking results.
Causes of a bad control switch can include electrical malfunctions, wear and tear from frequent use, or damage due to overheating.
Symptoms of a bad Control Switch include:
- Inconsistent or fluctuating burner temperatures
- Burners not turning on or off properly
- Difficulty in adjusting the temperature settings
- The control knob feeling loose or unresponsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The top oven kept beeping on and off when trying to use it. Jerry C. • Keenes , IL • March 07, 2022
I replaced both the probe and temp control. The problem came in calibrating the new control, the instructions that came with control did not factor in a double oven, called back and talked to Michael at tech support and he found proper instructions, walked me through the process and sent me a PDF file with all information needed. I can't thank Michael and AppliancePartsPros.com enough for their service after the sale. I would definitely recommend and use it again.
Read more
More
$48.33
- Compare At:
-
$58.00
- You Save:
-
$9.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 318398302
Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$34.95
- Compare At:
-
$41.24
- You Save:
-
$6.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053120
Seals oven door to prevent heat loss and improve efficiency. Replace if frayed, damaged, or door doesn't close properly. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Needed new door seal William S. • Weatherford , TX • January 17, 2017
This is a simple fix the old one just pulls out and the new one just goes in its place. no real skill needed here.
Read more
More
$110.29
- Compare At:
-
$131.25
- You Save:
-
$20.96
Genuine Frigidaire part
By: Frigidaire
Part Number: 316445501
This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.
- Directs power to the associated circuit when switched on or off
- Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
- Helps restore positive, consistent control from the backguard/control panel
What's included: One switch Install notes:
- Disconnect power at the breaker before servicing
- Access the switch from the control panel/backguard; retain screws/clips
- Label/photograph wire positions and transfer leads one at a time to the new switch
- Ensure firm terminal connections, reassemble, restore power, and test operation
Do-It-Yourself Stories from Customers like You
Oven light would not go off Robert K. • New York , NY • November 30, 2019
I ordered a part to replace the oven door light switch. I got the oven apart easy enough, but when I was ready to install the part, I found the replacement part only had 2 tabs and not the 4 tabs the original one had. I called AppliancePartsPros.com and spoke to a customer service rep who was able to assist. He determined that the replacement part was defective and said he'd ship out another one. While I wasn't enthusiastic about having to assemble and reassemble the oven,...
Read more
More
$73.95
- Compare At:
-
$87.26
- You Save:
-
$13.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 134716700
Washer that fits between the support roller and shaft in your dryer. Replace if worn, cracked, or missing to maintain proper drum alignment and support.
More
$1.12
- Compare At:
-
$1.14
- You Save:
-
$0.02
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$14.44
- Compare At:
-
$17.04
- You Save:
-
$2.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304463302
Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The oven convection fan was making an unusual noise when operating Leonard H. • Warrensburg , MO • January 08, 2017
I replaced it with an new motor-convection from AplliancePartsPros.com. One note of advice: the fan blade unit inside the oven is held on by being tightened counter clockwise and obviously loosened by turning the nut clockwise (lefty loosey/righty tighty does not apply here).
Read more
More
$192.95
- Compare At:
-
$229.61
- You Save:
-
$36.66