Kenmore Dryer 796.90448900 (79690448900, 796 90448900) Parts
Genuine Lg part
By: Lg
Part Number: 4861FR3068A
The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.
Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.
Symptoms of a bad clamp include:
- Water leaking from hose connections
- Hoses coming loose or detaching during operation
- Visible rust or damage on the clamp
- Poor water flow or pressure issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad bearings seal and spider David R. • Jacksonville , FL • February 04, 2017
If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it.
After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.)
Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Lg part
By: Lg
Part Number: 6631EL3003B
Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Lg dryer (12 yrs old) would dry for a while on any heat setting then shut completely off stay off no power complete black out then after 20 30 minutes come back on George C. • Kingwood , TX • August 30, 2015
I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair...
Read more
More
$28.95
- Compare At:
-
$34.74
- You Save:
-
$5.79
Genuine Lg part
By: Lg
Part Number: 383EEL3002A
Converting your dryer to propane? This gas orifice regulates LP gas flow to the burner for proper heating. Simple conversion component for LP dryers.
Do-It-Yourself Stories from Customers like You
Propane conversion Kenneth S. • Golden Valley , AZ • February 13, 2026
Change orifice
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
$135.59
- Compare At:
-
$160.00
- You Save:
-
$24.41
Genuine Lg part
By: Lg
Part Number: 5209EL1001L
Internal exhaust duct assembly that channels hot air between dryer components. Replace if cracked, rusted, burned, or causing stains on clothing.
Do-It-Yourself Stories from Customers like You
Hot air duct in lg dlg3788w dryer had buildup of melted fibers/fabric that was causing stains/streaks on clothing Alvin A. • Las Vegas , NV • November 13, 2016
Https://www.appliancefactoryparts.com/content/pdfs/125631-1.pdf has the details to disassemble the dryer to access the vent part that cost apx$28. 1.5 hrs and some patience along with a screw driver and players was alll it took to to remove the cover, control panel, front cover, drum, belt, gas line and manifold assembly, flame tube? And rear drum panel in order to replace worn part. Reassembled in 15minutes to clean and vacuumed dryer. Works great now.
Read more
More
$90.14
- Compare At:
-
$104.37
- You Save:
-
$14.23
Genuine Lg part
By: Lg
Part Number: 4774EL2001A
The Door Hinge is an OEM part for LG dryers. This hinge supports the dryer door, allowing it to open and close smoothly and securely. It ensures that the door stays aligned and functions properly, providing reliable access to the dryer drum for loading and unloading clothes.
Causes of a bad door hinge can include frequent use leading to wear and tear, physical damage from forceful opening or closing, and rust or corrosion due to exposure to moisture.
Symptoms of a bad door hinge include:
- Difficulty in opening or closing the dryer door
- The door not staying aligned or becoming loose
- Squeaking or grinding noises when moving the door
- Visible damage, bending, or rust on the hinge
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door hinge Stacey C. • Harrisburg , PA • June 12, 2014
This part was the perfect fix for my broken door hinge on my LG front loading dryer. I watched a video on YouTube of a hinge replacement of a similar front loading Samsung dryer. I needed a little help from my son holding the door glass and plastic in place while re-attaching the door to the hinge, but it was an easy repair.
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Lg part
By: Lg
Part Number: 4026EL3007A
The Door Strike is an OEM part for LG dryers. This part engages with the door catch to keep the dryer door securely closed during operation. The door strike is essential for ensuring the door remains tightly shut, allowing the dryer to function efficiently and safely.
Causes of a bad door strike can include wear and tear from regular use, damage from slamming the door, or misalignment issues that prevent it from engaging properly with the door catch.
Symptoms of a bad door strike include:
- The dryer door not staying closed
- The dryer not starting due to the door not being securely latched
- Difficulty in latching the door
- Visible damage or wear on the strike
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer door latch broke Bryan G. • Happy Valley , OR • February 11, 2019
Chatted with 1 of your professionals and within a minute she had the part and it was on it's way. The job was VERY easy to fix and the part is working great!
Read more
More
$46.31
- Compare At:
-
$55.11
- You Save:
-
$8.80
Genuine Lg part
By: Lg
Part Number: 4986EL2004A
Seals the dryer door to retain heat and moisture inside the drum. Replace if lint escapes or warm air leaks around the door. Confirm fit by model number.
More
$64.22
- Compare At:
-
$76.42
- You Save:
-
$12.20
Genuine Lg part
By: Lg
Part Number: 3750EL1001A
Stationary rack that installs inside your dryer drum to hold shoes, sweaters, and delicates that shouldn't tumble. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
My new dryer didn't come with an optional drying rack Jim J. • Burbank , IL • August 21, 2016
Contacted support and although my machine wasn't posted as compatible with the rack, support contacted their researchers and confirmed that it was the rack I needed.
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19
Genuine Lg part
By: Lg
Part Number: 5209EL1006A
Duct assembly channels air from dryer drum to blower and exhaust. Replace if cracked, warped, or missing to restore proper airflow and prevent lint bypass.
Do-It-Yourself Stories from Customers like You
Missing piece Rick D. • Waverly , TN • October 02, 2015
Stuck it on
Read more
More
$51.95
- Compare At:
-
$62.34
- You Save:
-
$10.39
Genuine Lg part
By: Lg
Part Number: 4948EL4001B
For propane order 383EEL3002A.
Do-It-Yourself Stories from Customers like You
Dryer was setup for propane very dangerous when connected to natural gas dryer was exhibiting low to no heat with a very pronounced presence of a strong raw gas smell Robert R. • Houston , TX • May 04, 2015
I ordered the natural gas conversion orifice with 2 day shipping, I also ordered for only maintenance reasons a new ignitor, as they are very common wear and tear item (like a spark plug on a gas engine or a glow plug on a diesel engine ). Both items came promptly and well protected . Easy install, only needed a Phillips screwdriver for entire repair. R&R top first, r&r front display panel,r&r door,r&r front panel,r&r drum (very easy), replaced ignitor and orifice. Total job took 30 min. I...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Lg part
By: Lg
Part Number: 3550EL2001A
The Cover, Lamp is an OEM part for LG dryers. This component covers and protects the interior lamp inside the dryer, ensuring it stays secure and free from damage while providing illumination inside the drum.
Over time, the lamp cover can become cracked or damaged due to the high temperatures and vibrations within the dryer. It is essential to replace a faulty lamp cover to maintain the proper lighting and protection for the lamp.
Symptoms of a bad lamp cover include:
- The interior lamp not staying in place
- Visible cracks or damage on the cover
- Reduced or blocked light inside the dryer drum
- The cover falling off or becoming loose
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lamp cover broke at the screw head. Justin D. • Aurora , CO • June 28, 2023
Replaced the part with the one ordered.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Lg part
By: Lg
Part Number: 383EEL9001G
Adapt your gas dryer for propane with this LP conversion kit. It provides the correct orifice and regulator adjustments needed so the burner fires properly on LP fuel, helping ensure safe operation and consistent drying performance after a fuel change.
- Converts a compatible gas dryer from natural gas to liquid propane (LP)
- Helps ensure proper burner flame characteristics on LP
- Appropriate when moving to a home with propane or changing utilities
- Symptoms can include weak heat, improper flame, or sooting
What's included: 1 conversion kit Install notes:
- Disconnect power and shut off gas before servicing
- Installation and regulator/orifice adjustments must be performed per the service manual
- After installation, leak-check all connections and verify proper burner operation
- Do not attempt conversion without the correct kit for your specific model
Do-It-Yourself Stories from Customers like You
Roller seized Pete A. • Carrollton , GA • September 01, 2020
Replaced roller.
Read more
More
$14.66
- Compare At:
-
$17.59
- You Save:
-
$2.93
Genuine Lg part
By: Lg
Part Number: 4778EL3001B
This adjustable leveling leg screws into the dryer base to support and stabilize the cabinet. Replacing a worn or missing foot helps level the appliance, reduce vibration and noise, and keep it steady on uneven floors.
- Provides threaded height adjustment to properly level the dryer
- Stabilizes the cabinet to minimize rocking, vibration, and walking
- Replaces a broken, worn, or missing foot
- Common symptoms: dryer wobbles, is hard to level, or makes rattling/vibration noise
What's included: 1 adjustable leveling leg Install notes:
- Disconnect power; shut off gas supply for gas models
- With a helper, carefully tilt or raise the dryer for access
- Unscrew the old leg; thread the new leg into the base by hand, then adjust with a wrench until the dryer sits level and stable
- Ensure all legs contact the floor and the dryer does not rock
Do-It-Yourself Stories from Customers like You
Lpg conversion Alan H. • Chestertown , MD • December 03, 2016
Changed orifice
Read more
More
$9.38
- Compare At:
-
$11.16
- You Save:
-
$1.78
Genuine Lg part
By: Lg
Part Number: 1SZZEL3001A
This replacement screw secures appliance components in their proper position. Use it to restore a tight, rattle-free fit when the original fastener is missing, stripped, or corroded. What it does:
- Fastens brackets, panels, or trim to keep assemblies aligned and secure
- Helps prevent vibration, rattling, and gaps from loose hardware
- Restores proper attachment when a screw is lost, worn, or damaged
- Common symptoms: loose panel/handle, misalignment, rattling, or a missing screw
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas before service
- Match location to the original; start threads by hand to avoid cross-threading
- Use the correct driver bit; do not overtighten (especially into plastic)
- If the original hole is stripped, repair threads before installing the new screw
Do-It-Yourself Stories from Customers like You
Dryer not spinning Brett B. • Durham , NC • June 23, 2025
Replaced idler pulley, screw, and dryer belt after completely disassembling the dryer
Read more
More
$9.13
- Compare At:
-
$10.04
- You Save:
-
$0.91