Lg Refrigerator GR-L207GBQA Parts
Genuine Lg part
By: Lg
Part Number: 6600JB1010A
Interior light won't turn on when door opens? This refrigerator door switch signals when the door opens or closes. DIY-friendly repair, takes about 5 minutes.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Light switch would not turn on light in fridge David R. • Hastings , MI • April 17, 2017
I watched the repair video and I replaced the switch. I ordered the switch on Friday and the part came the next day. Amazing.
Read more
More
$24.68
- Compare At:
-
$29.12
- You Save:
-
$4.44
Genuine Lg part
By: Lg
Part Number: 5007JA3006R
The Ice Chute Door is an OEM part for LG refrigerators. It is located in the ice dispenser area on the front of the refrigerator. It opens and closes automatically when ice is dispensed, ensuring a controlled release of ice cubes or crushed ice into the user's glass or container. The door helps to prevent frost buildup, maintain proper insulation, and protect the ice inside the dispenser.
Causes of a faulty ice chute door can include wear and tear over time, damage due to regular use or accidental impact, or a malfunctioning door motor or solenoid.
Symptoms of a bad ice chute door may include:
- Difficulty in dispensing ice
- Frost or condensation forming around the ice chute area
- The door not opening or closing smoothly or completely
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Ice forming under ice maker and around the chute Robin A. • San Diego , CA • November 29, 2014
The ice chute flap wasnt closing.
1. I turned off power
2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in
3. Disconnected the front panel
4. Unscrewed the next panel to allow access to the chute flap
5. Removed 1 screw holding complete flap and mechanism and replaced with new
6. Re installed all parts in reverse
Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Lg part
By: Lg
Part Number: 3390JA1150A
The Ice Cube Tray is an OEM part for LG refrigerators. It is located in the freezer section of the refrigerator and provides a designated space for freezing water into ice cubes. It is designed with individual compartments to form ice cubes in a specific shape and size.
Causes of a faulty ice cube tray can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as the tray cracking or breaking, difficulty in removing ice cubes, or improper freezing of the cubes.
Symptoms of a bad ice cube tray may include:
- Cracked or broken tray
- Difficulty in removing ice cubes from the tray
- Irregularly shaped or improperly frozen ice cubes
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Broken ice try David U. • Fort Walton Beach , FL • March 14, 2014
It was a snap. All I had to do was unsnap one end of where the ice tray attached to the ice maker and fit the tray into the two sides and then resnap the end back onto the icemaker. Very easy.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Lg part
By: Lg
Part Number: ACM73079207
This controller assembly is the appliance's main electronic control that manages cycles and user inputs to restore proper control operation. Replace a failing controller assembly to address unresponsive controls, incorrect cycle behavior, or intermittent errors. What it does:
- Manages cycle selection, timing, and communication between sensors and motors to coordinate appliance operation.
- Interprets user inputs from the front panel and sends commands to other components.
- Failure may cause unresponsive buttons, unexpected error codes, stalled or incorrect cycles, or an appliance that won't start.
- Replacing the assembly often resolves control-board–related faults when diagnostics point to the main controller.
What's included: One controller assembly. Install notes:
- Disconnect power (unplug or switch off breaker) before removing the old assembly to avoid shock or damage.
- Handle the board and connectors carefully; avoid static discharge and cradle the assembly by its edges.
- Match the replacement to the exact part number and transfer any brackets, grounding straps, or button housings as needed.
Do-It-Yourself Stories from Customers like You
Freezer was not defrosting causing the temperature to rise in the refrigerator and freezer Shane V. • Bath , PA • July 23, 2016
Installed a new control assembly.
Read more
More
$51.21
- Compare At:
-
$60.94
- You Save:
-
$9.73