Lg Dishwasher LDF7061ST Parts

This replacement switch cam interfaces with a lever or knob to actuate a microswitch. It restores reliable on/off signaling and the positive feel/engagement of the related control or latch mechanism when the original cam wears or cracks.

• Translates lever or rotary motion into precise switch activation
• Ensures the switch travels fully to open and close as intended
• A worn or broken cam can cause intermittent operation or functions that won't start/stop as expected
• Helps bring back a defined "click" or detent at the control/lever

• Disconnect power to the appliance before servicing; turn off gas/water if applicable
• Access the switch or latch assembly; remove any knob, trim, or cover as needed
• Note the cam's orientation/indexing before removal; take photos for reference and transfer any springs/clips
• After reassembly, manually test the mechanism to ensure smooth switch actuation before restoring power

Fix dishwasher not draining or OE error codes with a new check valve. Prevents backflow and keeps water moving properly. Easy 30-minute DIY repair.

Connects internal water lines in your dishwasher. Replace if cracked, worn, or leaking to restore a secure seal and prevent water damage under the unit.

Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.

Fixes inconsistent cleaning and improper cycle timing caused by inaccurate water clarity detection. Measures soil level in wash water for optimal performance.

Replace cracked or worn dishwasher leveling legs. This foot assembly installs at the base corners to restore proper height adjustment and stability.

This is a common fastening nut used to secure panels, trim, or components on compatible LG appliances. It provides a simple, reliable way to hold mating parts in place and restore proper fit and function. What it does

• Secures panels, brackets, or hardware to prevent movement or vibration
• Stops rattling or loose parts caused by a missing or worn nut
• Restores proper alignment when replacing damaged or stripped fasteners
• Works where a standard threaded nut is required for reassembly

• One common nut as pictured

• Disconnect power and water before servicing the appliance
• Use the properly sized wrench or socket to avoid rounding the nut
• Do not overtighten; tighten until snug and secure per OEM torque guidance
• Replace like-for-like—thread size and type match the original

Routes fresh water into the dishwasher during fill cycles. Replace this hose if cracked, kinked, leaking, or damaged to restore proper water flow.

This clamp secures hoses or wiring to the appliance chassis to prevent movement, chafing, and vibration-related wear. It helps keep connections stable so hoses and wires stay in place during normal use. What it does:

• Holds water, drain or vent hoses in position to reduce strain and prevent rubbing
• Keeps wiring harnesses routed and fastened to avoid chafing or accidental disconnection
• Reduces vibration-related noise caused by loose hoses or wires
• Helps prevent hose kinks and unintended movement that can lead to leaks or intermittent electrical issues

• One clamp

• Disconnect power to the appliance before servicing; shut off water supply if working with water lines
• Remove panels as needed to access the hose or wiring route, then replace the clamp in the same orientation
• Use appropriate pliers or a screwdriver if required; do not overtighten or deform the hose or wiring
• If the original clamp was secured with a fastener, retain and reuse it only if undamaged; replace any stripped or broken hardware

Small mounting bracket that secures internal dishwasher components in place. Replace if cracked, broken, or missing to stop rattling and maintain alignment.

Secures dishwasher components in proper alignment for quiet operation. Replace if bracket is worn, broken, or parts have become loose. Confirm fit with your model number.

Secures the dishwasher door to the cabinet and provides a stable pivot point. Replace if your bracket is cracked, broken, or missing to restore alignment.

This assembly includes the leveling leg adjuster components used to properly level and secure the dishwasher within its cabinet opening. It allows you to raise or lower the appliance so the door aligns correctly and the unit sits stable on uneven floors. Replace this kit if the dishwasher rocks, tilts, or if the existing leveling legs are stripped, broken, or no longer hold their position.

Secures internal dishwasher components to reduce movement and noise. Replace if broken or missing to restore proper alignment. Verify fit with your model.

Fix a loose, broken, or wobbly dishwasher door with this handle. Simple installation using basic tools. Compatible with multiple models.

A direct-replacement interior tray that provides a stable surface inside the appliance to hold dishes and catch spills. Replaces a cracked, warped or missing tray to restore a secure, easy-to-clean cooking or storage surface. What it does:

• Provides a level surface to hold food, pans or containers inside the appliance
• Helps contain spills and crumbs for easier cleanup and maintenance
• Restores correct fit and support when the original tray is damaged or missing
• Eliminates wobbling or instability caused by a broken or warped tray

• Always disconnect power to the appliance before servicing
• Remove any food, cookware and the damaged tray before installing the replacement
• Set the tray into position, aligning any tabs or slots; most tray installs are tool-free
• Handle carefully if the tray is glass or brittle; discard the damaged tray safely