Lg Dishwasher LDF7561BB Parts

Connects household water supply to your dishwasher. Replace if hose is kinked, cracked, dry-rotted, or leaking at connections. Installs at bottom.

This small clip attaches to the dishwasher rack and holds the tine rows in position. It allows you to fold or reposition tines to accommodate different dish sizes and shapes. Replace this clip if tine rows are loose, fall flat during wash cycles, or no longer stay in their adjusted positions.

This is a safety switch assembly that helps ensure the dishwasher operates only under safe conditions, such as when the door is properly latched or water pressure is adequate. It sends a signal to the control board to allow or interrupt the wash cycle. Replace this switch if the dishwasher will not start, stops mid-cycle unexpectedly, or fails to fill with water properly.

Channels wastewater from your dishwasher to the household drain. Replace if cracked, kinked, clogged, or leaking to restore proper drainage during cycles.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This is a damper and sound shield assembly that attaches to the dishwasher tub to reduce noise and vibration during wash and drain cycles. It acts as an insulating barrier that absorbs sound energy from water spraying and motor operation. Replace this part if your dishwasher has become noticeably louder than usual or if the existing sound shield is damaged, warped, or has come loose.

Replace cracked or missing dishwasher protective cover to shield internal components from dust and debris. Restores secure enclosure for wiring and sensors.

This is a slide rail and roller assembly that mounts on the right side of the dishwasher tub to support and guide the cutlery or dishrack as it slides in and out. The rollers allow the rack to move smoothly along the track. Replace this assembly if the rack is difficult to slide, feels wobbly, or the rollers are cracked, worn, or no longer turning freely.

Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.

Replacement dishwasher holder secures internal components in proper position. Needed when original is cracked, broken, or missing causing rattling.

Fix dishwasher not starting, cycle errors, or unresponsive controls. This main control board manages all functions and cycles. Moderate difficulty repair.

Replacement rack roller wheel for dishwasher lower or upper rack assemblies. Install when original wheels are cracked, broken, or worn causing rough rolling.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

Replacement rack rail assembly for dishwashers. Guides and supports dish racks for smooth sliding. Needed when rails are cracked, broken, or worn.

Secures and pivots the dishwasher door for smooth opening and proper alignment. Replace if your hinge is broken, cracked, or worn to restore stability.

The Rack is an OEM part for LG dishwashers. It is responsible for holding dishes, glassware, cutlery and other items securely in place during the wash cycle. The rack features an adjustable design that allows it to fit variably sized loads. 

Causes of a bad rack can include warping or bending of the wires over time due to heavy loads, and damage to the rack's ability to pivot or slide properly due to excess debris or buildup. 

Symptoms of a bad rack include:

• Dishes and silverware falling over or not being securely held in place during the wash cycle
• Difficulty fitting dishes evenly on the rack 
• Damage or bending of the rack wires
• Rust or corrosion building up on the rack

This OEM LG part is also compatible with select Sears/Kenmore models.