Samsung Washer 592-49082 Parts

Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more

At first I thought it was the bearing, but when I got it apart I found the main shaft had corroded from possibly the soap powder and bleach combo build up on the part. After I cleaned it all up I found one of the three mounting braces was cracked and causing the unit to shake during the spin cycle. Once I replaced that part and replaced a few missing parts I lost all found on your store the unit went together just as it came apart and works excellent. Read more

Initially I tried a video on your site for a similar washing machine but the Samsung had different screw locations for the face and you had to remove the small front door at the base of the washing machine as well to remove the front cover. Inside there was also, what appeared to be, some type of noise cancelling material bolted above and below the boot seal on the face of the drum. It was difficult to get a screwdriver to fit to allow me to remove the ring that holds the boot on the... Read more

Removed and replaced the pump and housing. Buy the housing too because when you remove the screws the plastics threads come out too. Read more

I am 68 Years old and I had this PUMP DRAIN part in place and working in around 15 minutes Read more

Part fit perfectly, great next day delivery. Read more

Ordered parts based on watching repair videos. Parts came in a timely fashion and where exactly what was needed. Repair videos helped make the repair fast and easy and the washer is working well saving me hundreds of dollars. I had a repair man in to look at it at first , charged me 110.00 and did nothing said all parts where backordered. I ordered the parts and within 90 minutes I was done. Read more

Appliance Parts Pro had a great video showing what the most likely problem was and how to fix it. Using the video, I disassembled the washer and removed the suspect part (Spider Arm), which I found to be cracked. I order the needed parts on a Thursday afternoon and had the parts in hand on Saturday afternoon. Reassembly was straightforward and the washer now works like new. The most difficult part is the manhandling of the drum out and back into the washer. It is heavy and awkward for one... Read more

I replaced flange shaft and bearings, ordered bearings through Yellow Van Handyman. Also put new door seal in while machine was apart. Found it easier to lay machine on its back to take drum out. Job took me all day but being retired I didn't mind.Although my wife thought I was crazy to put out that much money on a 5 year old machine, I believe I saved about $500.00 instead of buying a new washer. A reminder for all handymen, keep screws separate and label where they were taken from. Rick C Read more

Put in missing parts ordered. only one of the parts does not go with this washer that parts is case pre wash frontier. Read more

• Won't start

First I checked the breaker and outlet and both were good...then I unplugged the machine, took the top off, and removed the control panel. I check the wiring to see if there were any loose plug ins, etc...This is where I figured the panel was bad (or possibly the power cord) so I ordered both. The parts arrived the next day. (incredibly fast shipping) Since I wasn't expecting them til after the weekend I left everything disassembled and went on a mini vacation for a couple of days. Upon... Read more

Like so many before us, we too had the infamous corroded and cracked drum spider. Talk about a major design flaw; it's amazing how manufacturers are able to get away without more accountability on this problem, instead they just pick off consumers one at a time, with many just junking their machines and replacing them long before what was traditionally thought of as a reasonable service life. APP's video for replacing the spider in an LG machine was really helpful, as the Samsung only has... Read more