Samsung Dryer DVM7195BL2TS Parts

I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more

Opened up hinged bottom of microwave and saw that the old motor had come loose from its secure position. I decided to replace the old motor with the new one and secured it into place, which was very simple--just a matter of unplugging the old motor's connection; plugging in the new one; securing the motor in place with one screw; closing up the hinged bottom; putting in the new coupler; and checking to see if it works. It did! Read more

Unplugged power cord. Removed the microwave from over the range. Removed vent and screws on of microwave, which allowed me to remove compartment containing sensor at upper left area of microwave. Removed clamp holding sensor. Removed and replaced sensor. Reversed process and reinstalled unit. Read more

I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more

Installer missed drilled the hole for the mounting bolt so it was at an angle. To top that off, he had cross-threaded the bolt into the bracket and it couldn't be removed. Had to saw that bolt off to get the oven down. Looked up Appliance Parts Pros (as I've done in the past), checked their diagram, found the part(s), made the order, and received them quickly. Oven is done! Appliance Parts Pros makes it easy for the DIY'er to get the right part at a fair price. I'll use them again! Read more

• broken bulb

Our microwave is mounted over the range, and has dual lights underneath that light up the range. A while back in trying to replace burned out bulbs, one of the bulbs broke and in trying to remove the rest of the bulb from the socket, I accidentally destroyed the socket. We worked fine with the remaining bulb for a year or so, but it finally burned out. Unfortunately all of the replacement bulbs would only last 1-2 days before burning out again in the one socket. When I'd originally destroyed... Read more

Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more

Found the hi voltage transformer burnt out due to just being tired, checked all other components and every thing checked out ok. I started my career in Appliance repair 55 years ago so I have a little knowledge of the workings. I use you guys because of you great prices and fast delivery service. Well continue to use your products in the future. Read more

I used a voltmeter to test continuity on parts. I found 2 thermostats burnt out. I replaced all of the thermostats and also changed a capacitor. It now works well! Read more

• Exhaust fan not working
• Noisy