Samsung Washer WF219ANBXAA Parts

Part fit perfectly, great next day delivery. Read more

I fixed it by replacing the door switch assembly, door hinge and hinge bushing. The videos you provide was a great help on fixing the problem in no time at all. Ordered parts arrived the next day plus the parts were the correct ones. Read more

Appliance Parts Pro had a great video showing what the most likely problem was and how to fix it. Using the video, I disassembled the washer and removed the suspect part (Spider Arm), which I found to be cracked. I order the needed parts on a Thursday afternoon and had the parts in hand on Saturday afternoon. Reassembly was straightforward and the washer now works like new. The most difficult part is the manhandling of the drum out and back into the washer. It is heavy and awkward for one... Read more

I fixed it by replacing the door switch assembly, door hinge and hinge bushing. The videos you provide was a great help on fixing the problem in no time at all. Ordered parts arrived the next day plus the parts were the correct ones. Read more

• Won't start

First I checked the breaker and outlet and both were good...then I unplugged the machine, took the top off, and removed the control panel. I check the wiring to see if there were any loose plug ins, etc...This is where I figured the panel was bad (or possibly the power cord) so I ordered both. The parts arrived the next day. (incredibly fast shipping) Since I wasn't expecting them til after the weekend I left everything disassembled and went on a mini vacation for a couple of days. Upon... Read more

Like so many before us, we too had the infamous corroded and cracked drum spider. Talk about a major design flaw; it's amazing how manufacturers are able to get away without more accountability on this problem, instead they just pick off consumers one at a time, with many just junking their machines and replacing them long before what was traditionally thought of as a reasonable service life. APP's video for replacing the spider in an LG machine was really helpful, as the Samsung only has... Read more

Replaced drum bearings. Replaced front shocks, one had hardly any resistance. Replace both door boot clamps. Always take pictures as you take apart ! Learned the hard way years ago ! Read more

After receiving the part, I found I had to dismantle the left side of the handle in order to fix the right side that was broken. When I took the left side of the handle off I found the plastic piece that broke on the right side was about to break on the left side also. Having all the details and in advance of another broken handle, I ordered the part, just to have when it breaks. Read more

Replaced the suspension components by slightly lifting and supporting the drum assembly allowing replacement of the two support springs, followed by replacing the two shock dampers located at the lower front of the machine, followed by replacing the two rear dampers. The only difficulty was in designing a system to gently lift and support the drum assembly, needed to safely replace the top support springs. None of this could have been done without the wonderful support of Appliance Parts Pro... Read more

Normally, I hire someone to come fix washer or dryer problems as time is limited and if the cost is close or more than the machine, I buy a new one instead. But since we are on shelter-in-place, I figure I could repair it since I have more time on my hands and my brother assured me, it was not hard to do. I took the top panel, door off and then looked online to find a service manual, which allowed me to take the front panel off. My suspected drain hose was the failure mode: the rubber tube... Read more

• Shakes and moves

Since I'm useing these items for an upcoming move. The moving crew will be installing as well as removing them after use. Read more

• Shakes and moves

The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a... Read more

• Shakes and moves

The front legs were slightly worn and the rubber coverings were missing from the rear feet. This allowed the washer to slide easily on the tile floor. I replaced all four feet. This only required a 12 mm open end wrench. After leveling the washer, things were improved, but I also took the opportunity to replace the four shock absorbers under the drum. The shock absorbers were 5+ years old and one was showing signs of wear / damage. This required removing the front and rear panels with a... Read more