Samsung Washer WF419AASXAC Parts

At first I thought it was the bearing, but when I got it apart I found the main shaft had corroded from possibly the soap powder and bleach combo build up on the part. After I cleaned it all up I found one of the three mounting braces was cracked and causing the unit to shake during the spin cycle. Once I replaced that part and replaced a few missing parts I lost all found on your store the unit went together just as it came apart and works excellent. Read more

Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more

Removed and replaced the pump and housing. Buy the housing too because when you remove the screws the plastics threads come out too. Read more

Part fit perfectly, great next day delivery. Read more

Ordered parts based on watching repair videos. Parts came in a timely fashion and where exactly what was needed. Repair videos helped make the repair fast and easy and the washer is working well saving me hundreds of dollars. I had a repair man in to look at it at first , charged me 110.00 and did nothing said all parts where backordered. I ordered the parts and within 90 minutes I was done. Read more

Broken spider on Samsung WF330 after 8.5 years - faithful operation up to that point, so repair attempted. Spider, bolts, and support spring bushings (which can be unsnapped to make spring removal and thus tub removal super easy) ordered along with tub seal, bearings, and shaft seal from Amazon.com. Spider coated with Rustoleum appliance 'epoxy enamel' and washer re-assembled. Most difficult/time consuming aspects were orientation of tub to get in and out, cleaning of spider... Read more

• Won't start

First I checked the breaker and outlet and both were good...then I unplugged the machine, took the top off, and removed the control panel. I check the wiring to see if there were any loose plug ins, etc...This is where I figured the panel was bad (or possibly the power cord) so I ordered both. The parts arrived the next day. (incredibly fast shipping) Since I wasn't expecting them til after the weekend I left everything disassembled and went on a mini vacation for a couple of days. Upon... Read more

Replaced drum bearings. Replaced front shocks, one had hardly any resistance. Replace both door boot clamps. Always take pictures as you take apart ! Learned the hard way years ago ! Read more

I watched the Appliance Parts Pros video on YouTube. It showed me how to access and check the suspected parts. I inspected the parts and found arcing on the connection between the stator and position sensor. I ordered the parts at Appliance Parts Pros. When they arrived, I installed and checked out the washer. It was good to go. Thanks for the informative video and easy ordering experience! Read more

Normally, I hire someone to come fix washer or dryer problems as time is limited and if the cost is close or more than the machine, I buy a new one instead. But since we are on shelter-in-place, I figure I could repair it since I have more time on my hands and my brother assured me, it was not hard to do. I took the top panel, door off and then looked online to find a service manual, which allowed me to take the front panel off. My suspected drain hose was the failure mode: the rubber tube... Read more

Put in new assy flange and new spider bolts. New bearing flange and tub seal.It did take a lot of work. The flange was in a lot of pieces and mush, it was a mess. Read more

• Shakes and moves

Since I'm useing these items for an upcoming move. The moving crew will be installing as well as removing them after use. Read more