Poulan Snow Removal Equipment Parts

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

The chute is placed on the side of the snowblower or thrower where the snow will be expelled. The snow comes through the plastic chute and is moved out of the path the user is clearing. The chute can suffer from damage in a range of ways. If the user runs the snowblower into a hard obstruction beneath the snow, it can cause damage. In some cases, the chute might crack, or it might break entirely. If there is damage to the chute, it will not work correctly. It will then need to be replaced. This is a genuine OEM replacement chute for snowblowers and snow throwers. It is sold individually, and the hinge bracket and hardware to attach the chute are sole separately. This chute is compatible with several brands including Husqvarna, Poulan, Poulan Pro, and Craftsman. Buyers who are looking for a replacement chute must make sure that it will work with their make and model.

This is a plunger and gear assembly that provides lubricating oil to chainsaws. This part is compatible with over 125 chainsaws. Proper lubrication of the cutting chain is necessary for chainsaws as the rotation of the chain through the wood results in extreme heat and diminished ability to smoothly cut. Lubricating oil cools the chain and smooths the travel of the chain around the blade. Through continual use, the plunger and gear assembly will wear and cease to function. A sure sign of this occurs when the oil reservoir is full, but the chain is heating up and chewing rather than cutting wood. To replace the plunger and gear assembly, first, remove the chain and detach the bar. Then the clutch mechanism can be unscrewed, revealing the gear and plunger unit. Because contaminants can accrue in the reservoir and in the old assembly, it's best to discard any remaining oil safely and fill the reservoir with new oil. When replacing the gear and plunger assembly made by Jonsered, Husqvarna, and Poulan, it is best to use a genuine OEM replacement part such as this one, which is manufactured according to the specifications of the factory original.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.

This is a screw-on pulley for use with select models of snow throwers. The drive belt attaches to the pulley, which will allow it to rotate the blades. If the pulley is damaged or not working properly, there may be a squeaking sound. They might also notice that the machine is not as powerful or efficient as it should be. In some cases, the belts could slip or break due to a damaged pulley.This pulley is made from metal and is durable, but it can still be damaged. Exposure to moisture could cause corrosion. It could also bend, which would make it difficult to keep the belts installed properly. If there are problems with the pulley, owners will want to replace it right away so they can get the snow thrower working properly.This screw-on pulley is compatible with certain snow throwers from Husqvarna, Poulan, and Craftsman. It is a genuine OEM replacement part sourced directly from the manufacturer. The pulley is sold individually.

This replacement part is a screw. This part is small but very useful in many kinds of machinery. This part connects components and ensures that they are secure.Screws may become stripped with overtightening, or corroded from exposure to the elements.This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.