Parts for Poulan FEATHERLITE 21: Power Unit Parts

Muffler kit for gas line trimmers and edgers. Replaces damaged, rusted, or missing muffler assemblies to restore proper exhaust function.

Secures the muffler in place and reduces vibration on leaf blowers and trimmers. Replace if spring is stretched, broken, or missing for proper exhaust.

This screw secures the cylinder head to the engine block in outdoor power equipment like mowers and trimmers. Located at the top of the engine, it maintains proper compression and seal between engine components. Replace if the screw is stripped, corroded, or if you notice loss of engine power, oil leaks around the cylinder head, or difficulty starting the engine.

Carburetor gasket kit creates an airtight seal between carburetor and cylinder. Replace if engine runs rough, leaks fuel, or loses power. Confirm fit.

Carburetor adaptor mounting screw for trimmers and outdoor power equipment. Replace if stripped, missing, or damaged to secure carb adaptor properly.

Carburetor gasket kit creates an airtight seal between carburetor and cylinder. Replace if engine runs rough, leaks fuel, or loses power. Confirm fit.

Engine won't start or runs rough? This carburetor regulates fuel and air mixture for smooth engine operation. Moderate DIY repair for most models.

Foam air filter keeps dirt out of your engine and carburetor. Replace when clogged to prevent rough idling, sputtering, and hard starting. Verify fit.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

Choke spacer for grass line trimmers and other outdoor power equipment. Replaces cracked, broken, or missing spacers in the carburetor choke assembly.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

Carburetor gasket kit creates an airtight seal between carburetor and cylinder. Replace if engine runs rough, leaks fuel, or loses power. Confirm fit.

This replacement part is an ignition spacer. This is a genuine replacement part made by Husqvarna. This part is able to allow for space around the ignition so that it is able to function properly during use. A new ignition spacer might be needed if the machine is unable to turn off or on. If the spacer is damaged or stripped down in any way, it is also recommended that it be replaced. This can affect the overall functioning of the machine. Be sure that the engine is completely turned off before attempting to replace this part. Refer to the appropriate user guide for more information on how to complete this repair. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Replace your line trimmer's ignition module if the engine won't start or has weak spark. Direct fit component for reliable starting performance.

Trimmer won't start or shuts off unexpectedly? This ground wire switch restores proper ignition grounding. Simple repair in under 30 minutes.

This replacement part is a lead wire. This is a genuine replacement part made by Husqvarna. This wire is used in different machinery and allows the entire engine to operate smoothly and efficiently. A new lead wire might be needed if the current one is missing or damaged in anyway. It is not uncommon for any type of wire to become stripped down over time and not work as well. If this is the case, be sure to replace this part as soon as possible. Turn the engine off before beginning this repair. Work gloves are always recommended while working with wires to ensure safety to the user. This lead wire is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

Replacement screw for brush cutters, chainsaws, and trimmers. Secures internal components. Replace if stripped, missing, or damaged during repairs.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

Fix a trimmer that won't spin or makes grinding noises with this drive coupling. Connects the motor shaft to the trimmer head. Simple repair.

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

Replacement mounting screw for outdoor power equipment. Secures various components and reduces vibration. Order when screws are stripped, lost, or damaged.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

String trimmer won't start or rope won't retract? This starter pulley keeps the starter rope aligned for reliable engine starting. Simple DIY fix.

This starter spring will put tension on the starter pulley, which will then retract the starter assembly on a range of lawn and garden equipment. It engages the drive cup on the flywheel to start the engine when it is pulled. The starter spring is made from durable metal, but it may need to be replaced if it fails. It could become damaged or corroded, or it may have simply worn down over time and a lot of usage. A problematic starter spring will mean that the starter cord does not recoil properly after being pulled. It can make starting the engine difficult at best, and impossible at worst. In these cases, a replacement becomes necessary. The authentic OEM replacement starter spring is sold individually. It can be used with string trimmers, leaf blowers, and hedge trimmers. It is compatible with Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater brands. Buyers must always make sure they are choosing the correct option for their make and model.

Carburetor gasket kit creates an airtight seal between carburetor and cylinder. Replace if engine runs rough, leaks fuel, or loses power. Confirm fit.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

Fix fuel leaks or gas tank cracks in your trimmer with this complete fuel tank assembly. Includes fuel lines and filter. Basic hand tools required.