Parts for Ge GXSH45V01: Pump Parts

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Replace missing or stripped #4-24 x 3/4 inch mounting screw for water softener and filtration system housings. Secures panels and components.

This electrical switch opens and closes a circuit to signal the control when a mechanism is engaged or returns to position, helping restore reliable start/stop and proper cycle sequencing in your appliance. What it does:

• Sends an on/off signal t

Replace a cracked or broken valve cover on your water softener. This cover protects internal valve components from debris and damage during operation.

This washer wave is the molded wave-shaped plate that helps move water and clothes during the wash cycle, restoring proper agitation and wash action in compatible top-load machines. What it does:

• Re-establishes the water flow pattern under the l

Fix water softener regeneration issues with this rotor and disc assembly. Restores proper cycling and water flow. Common repair for softeners not regenerating.

This O-ring creates a tight, leak-resistant seal between mating water system components. Replacing a worn seal helps stop drips and maintain correct pressure and flow in your GE water treatment system.

• Forms the compression seal between housings

Support screen for water softeners prevents media loss and ensures proper filtration. Replace if damaged or during resin tank maintenance. Verify fit.

This replacement door mesh screen restores the protective metal mesh in a microwave door so you can safely view food while it cooks. It fits into the inner door assembly and helps maintain the microwave's shielding and visibility. What it does:

Fixes inconsistent water flow or excessive water usage. This flow plug restricts water to 0.1 GPM for precise filtration cycles. Direct fit installation.

Screen cone filters sediment in your water softener's brine tank. Replace if damaged or clogged to maintain proper water flow and softening performance.

This fill flow plug controls and limits water flow into the appliance to the specified 0.3 gpm rate, helping the unit fill correctly and preventing overfilling. It's a direct-replacement inlet flow restrictor used on compatible GE water systems. What it

Leaking water line connection? This compression nut ferrule secures tubing to prevent leaks at the inlet fitting. Simple slip-on installation.

Fix low water pressure or slow regeneration in your water softener with this nozzle venturi body. Essential for proper brine draw and system function.

Retainer for water softener systems. Secures internal components in place. Replace if cracked, broken, or missing to maintain proper assembly.

Fix leaking water filter connections with this seal O-ring. Stops drips at pipe, hose, and valve fittings. Quick 5-minute replacement restores watertight seal.

Fix low water pressure or leaks with this water softener body valve. Routes and channels water flow between internal ports. Restores proper cycling.

Fix a sagging or misaligned water softener door with this hinge spring. Restores proper tension for smooth opening and closing. Direct-fit replacement.

Fix a water softener that won't draw brine from the salt tank. This nozzle and venturi assembly restores proper regeneration. DIY-friendly repair.

Supports and centers the rotating assembly in your water softener for smooth operation. Replace if you notice wobbling or rubbing during rotation.

Water softener seal kit prevents leaks and maintains system pressure. Replace when you notice dripping or reduced water flow. Verify fit with your model.

Connects the drain hose to the drain outlet on water softeners. Replace when the existing adapter is cracked, worn, or leaking for a secure connection.

Fix water leaks or loose drain hoses with this drain hose clip. Secures the hose connection to prevent separation during operation. Simple DIY fix.

Mounting screw for water filtration and softener systems. Secures panels, brackets, and components. Replace if stripped, rusted, or missing.

This motor cam gear assembly replaces a worn or damaged cam gear that times and transfers motion from the motor to the appliance's driven components, restoring proper movement and reducing noise or slipping. What it does:

• Transmits motor rotatio

1-inch NPT threaded adapter for water softeners and filtration systems. Replace when replumbing or if threads are damaged. Verify fit with your model.

Leaking from valve connections? This retaining clip secures bypass and control valve fittings to prevent leaks under water pressure. Simple fix.

Fix water softener sensor errors or no regeneration cycles with this wire harness sensor assembly. Direct fit part restores proper system monitoring.

This turbine and support assembly replaces a worn blower wheel and its support to restore exhaust airflow and reduce noise. It's a direct-fit service part used where a damaged turbine causes weak ventilation or vibration. What it does:

• Spins to

Leaking water softener? This bypass valve assembly stops drips and restores proper flow control. Moderately easy DIY repair for cracked or seized valves.

Leaking at valve or fitting connections? This seal O-ring creates a watertight seal at hoses, valves, and fittings. Simple DIY repair part.