Parts for Ge GXSH45V01: Body Parts

Keep leaks at bay. This O-ring Seal Kit restores the watertight connections in your water softener's control and bypass assemblies, helping stop drips and maintain proper system pressure after age, wear, or servicing.

• Maintains a tight, leak-free seal at control valve, bypass, and plumbing connection points
• Replaces flattened, cracked, or nicked O-rings that can cause seepage or drips
• Helps preserve system pressure and prevent standing water or corrosion inside the cabinet
• Useful after valve/head service when original seals no longer seat properly

• Unplug the unit, shut off the water supply, and place the softener in bypass to relieve pressure
• Open a nearby cold-water faucet to depressurize; have towels ready
• Clean grooves and mating surfaces; install new O-rings lightly coated with food-grade silicone lubricant (avoid petroleum-based products)
• Reassemble, restore water slowly, and check all joints for leaks

This top cover is the replacement upper panel that protects internal components and finishes the appliance's exterior for a clean look. Replacing a damaged cover restores protection and prevents exposure to wiring or controls. What it does:

• Shields the appliance's back/control area from debris, moisture, and accidental contact
• Restores a flush, finished appearance when the original cover is cracked, warped, or missing
• Helps keep internal components from being exposed or collecting dust
• Can reduce rattles or movement caused by a loose or damaged top panel

• Disconnect power (unplug or shut off breaker) before starting any work
• Use basic hand tools to remove retaining screws and lift off the old cover; keep hardware for reuse if undamaged
• Handle edges carefully to avoid cuts or scratching finished surfaces

The Control Water Softener is an OEM part for GE water softeners. This control mechanism regulates and monitors the water-softening process through electronic signals and circuitry. It operates the valve, initiates regeneration cycles, tracks water usage, and provides system diagnostics. 

Symptoms of a bad control include: 

• Inability to regenerate or initiate regeneration cycles
• Fault codes or error messages displayed 
• Unresponsive or uncalibrated controls 
• Inaccurate meter readings
• Systems not operating as expected

Causes can be due to moisture damage, loose or faulty electrical connections, or normal component wear over time.

This GE OEM replacement ensures precise control and monitoring of your water-softening system. It provides dependable performance to reduce hard water problems and prolong equipment life. This part is also compatible with various Kenmore and other private-label water softener models. 
 

This cooktop burner bowl replaces the outer pan that sits under a surface heating element, restoring a clean appearance and proper drip containment. It helps keep spills away from internal components and supports safe, stable element placement. What it does:

• Replaces a damaged, rusted, or dented burner bowl to restore proper drip collection
• Directs spills and overflows away from the cooktop's internal wiring and chassis
• Helps the surface element sit level and stable for consistent heating
• Reduces visible corrosion and improves the cooktop's finished appearance

• One cooktop burner bowl

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the surface element and lift out the old bowl before installing the replacement
• Inspect and clean surrounding area; replace any damaged clips or fasteners if needed

This brine well with decal is the molded reservoir that helps contain brine solution in the appliance's salt tank assembly. Replacing a cracked or worn brine well restores the proper containment of brine and helps maintain consistent brine draw. What it does:

• Houses and contains the brine solution so the appliance can draw brine properly during regeneration cycles
• Guides the brine tube and helps prevent salt or debris from clogging the draw area
• Helps maintain correct fluid level and separation inside the salt tank
• Common symptoms indicating replacement: visible cracks or damage, leaking around the salt tank area, or reduced performance related to brine draw

• Disconnect power and shut off water supply before starting any repair
• Remove salt and drain the tank per the OEM service instructions to avoid spills
• Handle the molded plastic part carefully to avoid cracking; ensure correct orientation and secure fit during reassembly
• Follow the appliance manufacturer's instructions for reassembly and testing after installation

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

The GE clip is an OEM replacement part responsible for securely holding the water filter in place within the appliance. Its primary function is to ensure a tight and stable fit of the water filter, preventing any potential leaks or misalignments during the appliance's operation. 

Common causes of a bad clip can include regular wear and tear, accidental impact, or corrosion.

This part fixes the following symptoms:

• The water filter not staying in place or coming loose
• Leaks or drips around the water filter area
• Difficulty in inserting or removing the water filter
• Reduced water flow or dispensing issues from the appliance
• Visible damage or wear to the clip

The GE clip can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This installation kit provides the hardware needed to secure and finish appliance installation for compatible GE units, helping ensure a stable, professional fit and safe operation. What it does:

• Supplies mounting hardware and/or trim pieces used during factory-recommended installation
• Helps properly secure the appliance to adjacent cabinetry or flooring to reduce tipping and movement
• Restores missing or damaged installation components after a service or remodel
• Matches OEM fit and function to maintain correct alignment and aesthetics

• Follow the appliance owner's manual and local codes for correct installation and anti-tip requirements
• Turn off power and gas before starting work; wear safety gear
• Use the OEM hardware only as shown in manufacturer instructions; improper installation can create safety hazards