Parts for Kitchenaid KDFE204KBL0: Pump, Washarm And Motor Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Fixes dirty water or food specks remaining after wash cycles. This check valve prevents backflow into the dishwasher sump. Moderately easy repair.

Replacement spray arm for your dishwasher. This rotating component distributes water throughout the wash cycle. Replace if cracked, broken, melted, or missing pieces.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose is an OEM part for Whirlpool dishwashers. It connects the dishwasher pump and sump, functioning to drain and recirculate water throughout cycles.

Causes of failure can include mineral buildup inside the hose, splitting, and cracking of the lining from continuous heat and pressure usage over time.

Symptoms of a bad pump to sump hose include:

• Inadequate drainage and water removal from cycles
• Standing water left in the bottom of the dishwasher tub
• Leaks developing from hose connections at the pump or sump area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Hose is an OEM part for Whirlpool dishwashers. It is responsible for connecting the dishwasher to the water supply and drain system, ensuring proper water flow and drainage during the cleaning cycle.

A bad dishwasher hose can be caused by regular use, wear and tear, or damage from external factors. If you notice issues such as leaks, blockages, or a loose connection, it may indicate a problem with the hose.

Symptoms of a bad dishwasher hose include:

• Water leaks around the dishwasher or under the sink
• Poor water draining or standing water in the dishwasher
• Insufficient water supply

Replace your faulty dishwasher hose with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This 2-hole disc diverter redirects water flow inside the washer's dispenser/tub assembly so detergent and rinse water route correctly. It helps restore proper dispensing and prevents water from spraying or leaking in the wrong area. What it does:

• Directs incoming water to the correct dispenser or tub channels during fill and rinse cycles
• Helps ensure detergent and fabric softener are delivered at the right time
• Can stop errant water spray or leaks caused by a worn or damaged diverter
• Restores normal water routing when the washer's dispense functions fail or behave inconsistently

• One 2-hole disc diverter

• Disconnect power and turn off the water supply before starting work
• Replace only with the exact OEM part number shown for your model
• Installation may require removing the dispenser assembly or portions of the top/tub cover; your model's service diagram
• Inspect adjoining seals and gaskets during replacement and replace if damaged

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Water leaks around the hose connection points
• The hose slipping off the fitting
• Visible rust or wear on the clamp
• Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Dishwasher overheating or shutting off mid-cycle? This high limit thermostat monitors temperature to prevent damage. Fixes common heating issues.

Drain hose that diverts wastewater from your dishwasher to the disposal or drain pipe. Replace if cracked, leaking, or disconnected from the sump assembly.

The Clip is an OEM part for Whirlpool dishwashers. It securely attaches the drain hose in place, directing wastewater out of the dishwasher during drain cycles.

Causes of a bad clip can be cracks, breaks, or deformations causing weakened grip. Normal wear and repeated drain cycles can also damage the clip over time.

Symptoms of a bad drain hose clip include:

• Water or leaks around the base of the dishwasher
• Puddles forming due to the hose slipping out of place
• Improper drainage if the hose is not positioned correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

Secures hoses to fittings and prevents leaks in your dishwasher. Replace when connections loosen or water escapes. Confirm fit with your model number.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.