Janis February 27, 2016 for Model Number SHU9905UC/U06 Hello! Trying to install this hand-me-down dishwasher and it seems the power switch does not work. It must be held down to engage. Is there an easy replacement? Thanks for your time!
1 Answer Janis, The power switch is part number 00165886 but unfortunately has been discontinued by the manufacturer with no suitable replacement available. Read More...
Darryl R November 14, 2015 for Model Number Shu9905uc/uo6 Dishwasher runs for four hours before complete. runtime is much too Long
1 Answer Darryl, You will want to check to make sure that under the unit in the pan that there is no water which could trip the flood switch. If this checks ok then the most likely issue will the control module of the unit. Read More...
Kevin April 28, 2015 for Model Number SHU9905 UC/06 (FD 7905-7912) Friend has a Bosch dishwasher, model SHU9905UC/U06. When you press the on/off switch, and select a cycle, nothing happens (no lights). Obviously checked circuit breaker and there power to unit. I removed power switch and disassembled to see if that was issue. All contacts were clean and switch checks fine. Door switch also checks good. I noticed if you press the power button up & down slightly and quickly with out the detent catching the lights will flicker on the control module buttons. Is the module the culprit or am I missing something else that would keep the unit from powering up? Any help would be appreciated. Thanks, Kevin
1 Answer Hello Kevin, I would verify proper voltage is being passed through the wire nut connections in the power connection box behind the kick panel. If no problems are found, check the power button for resistance, (should not show a resistance when closed but similar to touching the meter leads together). If resistance is shown through the on/off switch when closed it should be replaced. If no problem is found, replace the control 00481055. Read More...
Charles S. April 08, 2014 for Model Number shu9925 uc/12 Depressed power switch: No power light and unit emits humming sound. No other lights or functions.
1 Answer Hello Charles, This is most likely a bad water inlet valve 00425458 that has allowed water to dribble into the main base. This is a common issue and the water has to be dried out of the base when the water valve is replaced to restore normal operation. Read More...
Dustin November 17, 2013 for Model Number SHU680UC/U12 It does not drain the last rinse and has 2inches of e=water left in it. If I run it again that much water is left in it. I have put a new pump in it the drain is free flowing. What should I do? Thanks....Dustin
1 Answer Hello Dustin. It sounds like the control module will need to be replaced on the unit. Read More...
Jason November 16, 2013 for Model Number Bosch SHE55p06uc/54 When the auto start timer is set the unit never turns on. When we turn it on without the timer it works fine. Nothing else seems wrong.
1 Answer Jason, The issue with this unit not working in the auto cycle would be caused by a faulty control module 00677001. Read More...
Tom September 18, 2013 for Model Number SHV56C03UC/14 Dishwasher runs, but will run down to 1 minute and not shut off. Will run all night.
1 Answer Hello Tom. You need to look and see if the unit is leaking in the bottom of the unit. If so, and the float is up, it will cause the issue you are having with the unit. You will need to repair the leak in the bottom of the unit. Read More...
Joe September 17, 2013 for Model Number shu3322uc/u11 The dishwasher will start the cycle, filling with water, but the circulations pump doesn't come on. I can cancel the cycle, and the water will drain. Thanks. Joe
1 Answer Hello Joe. You will need to test and see if there is power to the circulation motor. If so, and it does not run, you will need to replace the motor on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Donna July 23, 2013 for Model Number SHE6AF06UC/05 My Bosch dishwasher is 3 years old. It is not draining at the end of the last cycle and shows an E25 error. My husband has checked the plumbing (drain) and installed a new drain hose, but nothing seems to be plugged under the house. Dishes appear clean, but there is about 2 inches of water left in the tub. I can turn the dishwasher off and back on and then press the start button and hold and the dishwasher will drain. The last 2 times I ran the dishwasher, it showed a E01 error and about 2 inches of water was left in the tub at the end of the cycle. What do you think is wrong with the dishwasher?
1 Answer Hello Donna. E25 means that your drain line is blocked and not draining properly. You may need to replace the drain pump on the unit. If the hose is not kinked or clogged, and sometimes it drains and sometimes it does not, it is leaning toward a bad pump on the unit. Read More...
1 Answer Hello Brad. You need to see if the heater reads closed for continuity. If not, replace the heater assembly in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...