Terri August 28, 2017 for Model Number BOSCH SHX56C05UC/23 DISHWASHER Hi! Our Bosch dishwasher was taking a long time to finish cycle and dishes not getting clean/streaky. Same time rinse aid refill light stopped working and dispenser seems empty very fast after filling. Should I replace dispenser? And is this the correct replacement part for my model dishwasher? Thanks, Terri
1 Answer Terri, The detergent dispenser for the model number you supplied is 00490467 / 00490467. You may want to check and make sure the water temperature is hot enough, it should be 120 dgrs.F. at the first fill of the cycle or it won't "break down" the detergent properly. and check the water level in the bottom of the tub should be at least 1/2-3/4 inch deep. The rinse dispenser, depending on the setting should dispense 1/4 tepn to 1 tspn of agent per cycle. The dispenser may have a clogged plunger or the linkage is distorted and holding the rinse agent dispenser open. Read More...
Jack June 07, 2017 for Model Number Bosch dishwasher SHU9915UC/U12 Our rinse aid is not working. We need to replace the soap dispenser. What part number do we order? Does this dishwasher take a vented or non-vented dispenser? There is currently a vented dispenser installed, which has leaked at the connection to the dispenser. We are having a very hard time removing the dispenser. Do you have any suggestions for removal?
1 Answer Jack, The correct dispenser assembly for the model number you supplied is 00490467 / 00490467 Dispenser. It appears that the dispenser is a non-vented dispenser. There were a few UC11 / UC12 models that did have condensation tubes, and vented dispensers, but we don't think that would apply to your model and style dishwasher. Dispensers can be a little difficult to replace, you may want to wear gloves to keep from cutting or scraping yourself on the sharp edges of the tabs, but the video attached to the part number in the parts order screen will give you a lot better idea of what to expect and how to remove the original dispenser. Read More...
J February 28, 2017 for Model Number SHU 3305 UC/U12 FD 8108 This replacement dispenser I received has a computer chip connection port on the rear of the rinse aid area - and my original dispenser did not have a connection for that - only one red/copper connector in the center rear of the unit. Is this the correct unit/will it work if this computer chip is not connected to my dishwasher? Is the part number located on the part itself somewhere?
Chris December 03, 2016 for Model Number SHE68M05UC/50 I bought a replacement dispenser for my Bosch dishwasher, the rinse aid from the old unit was emptying out every few days. I bought part 490467 directly from Bosch. The new unit does not have a circuit board to connect the wiring harness that I assume controls the rinse aid. There is different circuit board on the bottom of this new unit, but the harness doesn't plug into it the same way. Nobody at Bosch can tell me why the replacement part doesn't look like the original. I found another dispenser (488964) that looks like mine, but Bosch says it's the wrong one. Any ideas? Thanks.
1 Answer Chris, It is a possibility that the part was packaged incorrectly and that the part in the box may have been the wrong one. We do show that the 00490467 is the correct part. Read More...
Lisa August 09, 2016 for Model Number SHU9915 UC/11 I have a leak coming through the back of the detergent dispenser which we replaced within the last year. My best guess at this point is that my model requires an unvented dispenser and we installed a vented one. I believe it took this long for the foam insulation to saturate resulting in the leak. Is this dispenser unvented?
1 Answer Lisa, The correct detergent dispenser assembly for the model number you supplied is 00263088 / 00263088. It is a non vented dispenser assembly. Remeber to remove the insulation panel and allow it to dry out, or replace the panel [00351934] so the moisture doesn't damage the door liner or outer door panel panel. Read More...
Shane March 16, 2016 for Model Number SHU5302 UC/U12 I am looking for the soap dispenser unit for a Bosch dishwasher Model#shu5302uc/u12 I am finding 2 online that look the same. Thanks Shane
Shane March 15, 2016 for Model Number SHU5302 UC/12 (FD 8003-) I am looking for the soap dispenser unit for Bosch shu5302uc/u12
Stephanie February 04, 2016 for Model Number Bosch SHE56C05UC/22 I need to replace the soap dispenser on my Bosch SHE56C05UC/22 dishwasher. This site gives two different dispensers as possible replacement parts - AP3844311 and AP2802340. Can you tell me which is correct, or if they are the same?
David January 26, 2016 for Model Number shx43c05uc-46 The substitution number #490467 is not suitable for the original #490472. The wax motor connection is fine but the rinse and connector is different and in a different place on the dispenser. What gives? I need to fix this unit ASAP! Please advise.
1 Answer Hello David. Based on the manufacturer recommended part, you have the correct dispenser 00490467. If the connector is not working, you may need a technician to check your harness. Read More...
Jeannette October 22, 2015 for Model Number SHU3132UC/14 The dispenser does not release the rinse agent. The soap dispenser works but not the rinse. Do you have the correct part ofr this Bosch dishwasher and what is it? Than you.