Shirley February 15, 2018 for Model Number Bosch HEI8054 On the control panel, the numbers "2" and "4" for setting the temperature have quit working. All the other numbers work fine. Do you think that replacing the display module will correct the problem or could something else be causing this?
1 Answer Shirley, Based on your post information, we wouldn't expect the display module to be the problem. We would expect the "front panel", with the membrane switch/keypad assembly to be the issue. You didn't include the complete model number (ie: HEI8054U/07), so we're not sure which control panel you would need. Read More...
Gemma January 20, 2018 for Model Number HEI8054U Was happy with this unit overall until the display panel would not light up and some of the oven functions did not work due to moisture issues from insufficient seal with the poor design from the top cooktop to to front panel. I believe that moisture gets inside the front panel from the cooktop if there is a water or some kind of moisture build-up which may seep past the sealant/gasket or whichever you may call it. has this design "flaw" been addressed as i am going to attempt to order the "$140" replacement part of 00758968 hoping this part will solve the issue of not having the display of the $1800 oven If this is the start of purchasing parts for this 500 pound paper-weight, do you have any other suggestions or recommendations.
1 Answer Gemma, There has not been any service bulletins or service pointers on this issue. It would be recommended to check to make sure that the cooling fans are running but sounds likely it is just a bad board. Read More...
Tom November 22, 2017 for Model Number HGIP054UC/01 My oven display is off and touch panel doesn't work either. It comes back to life once a while but goes dead after a few hours. Is this a display unit problem or the main module? Thanks.
1 Answer Tom, This issue would most likely be caused by a faulty control module with the display coming and going. Read More...
Tom November 16, 2017 for Model Number HEI8054U/01 Hello, my Bosch range has no display, but the buttons work and the oven functions. I re-seated the display board but no luck. I am ready to order the display but wanted to know if there is anything else that could cause this issue? Thanks
1 Answer Tom, The display module would most likely be the issue with the unit. The part number will be 12029207. Read More...