Customer Questions and Answers for Drain Pump Motor Assembly by Bosch

Hello Evelyn, As per the training manual: •Remove front panel •Loosen and remove hoses •Disconnect greendoor latch release cord. •Disconnect wire harness •Carefully slide pump toward rear of washer, then lift it out of washer (taking care to not damage the four rubber feet). For more detailed instructions, please post a new question along with a current e-mail address and we can send you the necessary illustrations for this and other repairs at no charge.

Hello Tommie. No, you will need to order 00436440 for the correct drain pump needed.

Hello Jeffrey. They do not sell just the motor, you have to order the assembly 00436440. Thank you.

Michelle, You will have to remove the front panel of the washer in order to get to the drain pump.

Tim, It should be that if you push in on the tabs then you will be able to slide the drain hose off.

Hello Mike. You will need to order 00436440 for the correct pump needed.

Hello Jentzy. You have to remove the top and front panel off the washer.

Hello Jentzy. There is a tab you release to slide the pump toward the back of the unit to remove it. Make sure you release the tab first on the unit.

Hello Jentzy. To remove drain pumps: •Remove front panel •Loosen and remove hoses •Disconnect green door latch release cord. •Disconnect wire harness •Carefully slide pump toward rear of washer, then lift it out of washer (taking care to not damage the four rubber feet).

Mike, Unfortunately the manufacturer does not offer the cover for the drain trap or drain trap separately. You will need to get the drain pump assembly 00436440.