Ian July 12, 2020 for Model Number SHEM78W55N/01 Hi guys Just viewing your great video on how to replace sump assembly on dishwasher SHEM78W55N/01 https://www.appliancepartspros.com/bosch-sump-668102-ap4483459.html I'm in the middle of replacing mine due to a slight leak and accidently remove the water switch motor from the water diverter and moved the small plastic cog within. I'm should it must have a set position enabling it to operate the water diversion correctly. As the cog sits on a spline, it can be placed back many ways so I need to know how it sits or maybe the motor resets itself?. I should have unscrewed the water diverter only as per your video. Any help would be greatly appreciated. Thx Ian
1 Answer Ian, It should reset itself when you turn the unit. on. There will be a positional based switch that will activate to tell it is in the correct position. Read More...
Steve March 18, 2019 for Model Number she3arf6uc/22 Won't drain, e-24, then e-25 codes show up. Could it be the pump? It's only 2 years old! Can you send me the proper pump part number, and directions for installation if you have them? Thank you.
1 Answer Steve, these error codes are showing that the unit has a blockage not allowing the unit to drain. You may want to check the drain pump housing,drain check valve, drain hose, and the inlet where the unit drains into for any clogs. If there are no clogs, then the issue would be with the drain pump [00631200] which can be removed by removing the base from the tub. Once the base is removed, the drain pump is removed by pressing the locking tab and rotating counter clock wise. Read More...
Craig January 29, 2019 for Model Number SHE7ER55UC/50 Do you have the gasket/seal for the Sump? Or do I need to purchase an entire Sump and Seal?
1 Answer Craig, the sump seal is only available with the sump assembly kit and the kit you will want to use is 11002716 00668102 per the manufacturer parts diagram. Read More...
Grant Marr January 14, 2019 for Model Number SHE53TC5UC Please describe how to remove bottom pan on my Bosch dishwasher
1 Answer Grant, To remove the base you will need to pull the unit out and on the back there will be 2 screws on the back corners and 2 on the front corners that would need to be removed. Once removed lay the unit on its back and the base will come off. Read More...
Robert G. November 08, 2018 for Model Number shxm78w56n/01 I bought this last week. I only received the plastic drain part. I need the motor. That is what is bad. My dishwasher will not drain and I need the replacement motor. What number do I order for that? Thanks
1 Answer Hello Robert, You will need to order 00631200 for the drain pump on the model provided. Read More...
Robert November 03, 2018 for Model Number SHE65T56UC/02 Hi, I purchased part number 00668102 sump for my bosch dishwasher. I was wondering if you have any installation instructions or tips for installing this part. Thank you, Robert
1 Answer Robert, Sent you an email with teardown procedure. Use photos of wire locations to help with reassembly. Read More...