John June 10, 2013 for Model Number PLEF398DCE I turn oven on but neither the bake element nor the Broil element turn on. The display shows that the oven is functioning and the convection fan is spinning but no heat is coming from the element. Could this be the control panel, if not what else could it be?
1 Answer John, To ensure that it is the control board you can test the board by putting unit on bake and testing for 240 vac from L1 to bake. If there is correct power then it would be the control board if there is not correct power then you will want to start checking at the terminal block for 120 vac from the outer terminals to the center. If either do not have power then it is home electrical or power cord. Read More...
Guy November 28, 2012 for Model Number cplef398dcl Hello, 1 column of touch buttons ( 3,6,9 and start) wont work. I checked the contuinity, and it seem good.... all of the other touch buttons are functionnal....also do you ship to Quebec, Canada ? tthanks Guy
1 Answer Guy, Sorry, we are not able to ship to Canada or internationally at this time. Based on your post information and escription, you will need to order and replace the ERC/Clock 316418700 / 316418700. Thanks Read More...
Lynn May 29, 2012 for Model Number Plef398dce Was baking cake and heard loud "pop" from oven and saw blue flame coming out from behind oven. Turned off breaker and flame went away. Haven't turned anything back on. What could this be? Thank you:)
1 Answer Hello Lynn. Based on the information you provided, it sounds like the bake element 316415900 may have burnt out on the unit and will need to be replaced. Read More...
James May 27, 2012 for Model Number PLEFZ398ECF Stove top burner comes on HIGH without being tuned on and buzzer on stove comes on.
1 Answer Hello James, The first thing I would check for is a pinched wiring harness. If this isn't the case, I would test the electrical control for the surface element that is giving the problem. With an ohm meter, test from terminal 2a to terminal 1a. If this shows any continuity at all with the switch in the off position, change the electrical control. If it reads infinite, change the surface unit control board 316442101. If you require any more assistance, I would greatly appreciate knowing which burner we are referring to so I can make wire color references and give accurate part numbers. Read More...
Scott April 19, 2012 for Model Number PLEFZ398ECF Turned on the oven and the lower heating element would not come on. Then element came on was erratic on tempature and then the oven shut off, indicating a F-10 error, also there was an electrical burning smell from the control board. Is the control board shot ?
1 Answer Hello Scott. Test the oven sensor and make sure it reads around 1100 ohms at room temperature. With the burning smell, it sounds like the clock 316418700 is the issue, but the sensor needs to be tested as well. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Tim T. November 18, 2011 for Model Number plef398dcc I had nothing working except warming drawer, soldered open relay pin on clock timer board, now I have all cooktop burners, no oven bake or broil. Any thoughts?
1 Answer Hello Tim. Based on the information you provided, it sounds like the open pins shorted the relays on the control board and the control board 316418700 will need to be replaced. Hope this helps. Read More...