Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Refrigerator Freezer Electronic Control Board (White) by Frigidaire

Best Seller
Manufacturer Part
4.89 (64)
By: Frigidaire
Part Number: OEM15956754
Manufacturer Part Number: 297370600

This electronic control board includes the user-facing touch pad display panel and the circuit board that manages freezer temperature settings and functions. It mounts on the exterior of the freezer compartment and allows you to adjust temperature and other settings. Replace this board if the display is blank, unresponsive, shows error codes, or if the freezer is not maintaining the correct temperature despite other components working properly.

More
$118.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Frigidaire Refrigerator Freezer Electronic Control Board (White) (Part Number: OEM15956754)

1 Answer

Kim,

This issue with the unit would most likely be the control board 297370600 being faulty. The control panel just pulls straight off.

Read More...
Pam for Model Number LFFU14F5HWL

Hello, our freezer's "door ajar" alarm wont' stop buzzing! Last year, we had this same problem, and somewhere on the internet I read a blog where somebody said if you unplug the freezer, wait a few minutes, and plug it back in, it will basically reset or trip the alarm and solve the problem - which it did. However, this year, different story as I cannot find that "secret formula" online, and we have since then tried pulling the control thing out of the door, and putting it back in, and that didn't work either. Additionally, the manual has NOTHING on this issue - please help - I am about to throw this freezer outside. PS - Not issues with not freezing; the door isn't ajar, and we checked the drain - nothing plugged....

1 Answer

Pam, " Door Ajar Alarm This feature provides a warning if the door is open for more than five minutes. There will be a beep every five seconds and the “Door Ajar” indicator will light up. Press “Alarm Reset” to turn the alarm off. The “Door Ajar” indicator will remain lit until the door is closed. If the door remains open for 15 minutes or more, the interior lamp will turn off." you'll need to check the door light switch 216822900 at the bottom right corner of the cabinet, and make sure the interior light goes out when the switch is pressed. Then check the freezer door and door gasket, to make sure they are activating the switch and sealing against the cabinet.

Read More...
Steve for Model Number LFFU14F5HWA

This upright freezer is only 3 years old, and it quit working. The control board is only partially lit, and the fan nor compressor works, reading your Q & A section, I have deduced it is probably the 297241600 controller, however, have you ever had an instance where it quit after the INSIDE of the door had frozen up. We defrosted the freezer by unplugging it, and for several hours afterward heard ice chunks breaking and falling inside the door as well as draining large amounts of water from the lower part of the door.

1 Answer

Hello Steve. Based on the information you provided, it sounds like the user control board 297370600 is bad and needs to be replaced.

Read More...

1 Answer

Thomas,

This issue would be caused by the control board 297370600 but until the control is fixed you will not now that the unit is working. It is possible that other components have been damaged.

Read More...
Momof3 for Model Number FFU17F5HWC

I'll try to keep this short... For a while the display on the front of our freezer was turning off intermittently but would come back on when it was unplugged/re-plugged in. Then last week it turned off and wouldn't come back on! The freezer was still running (seemingly at the coldest setting), but the display wasn't working at all. Now, the breaker seems to have popped and the freezer won't come back on at all! I even tried a different outlet, but the 'high temp' and 'door ajar' lights flicker and that's it! Sounds like its probably the control board, but I'm not 100% sure. What do you think? Thanks in advance for any advice you can offer!

1 Answer

Hello Wendy. Based on the information you provided, the electronic control 297370600 is bad and will need to be replaced on the unit.

Read More...

1 Answer

Hello Brenda,

To replace the control on freezer you will use a flat blade to get underneath the control panel and pop it out. Line up the new one and push it in.

Read More...

1 Answer

Hello John,

You will want to check to see if the compressor is running and see if the evaporator motor is getting power. If there is power to the motor but it is not turning then you will need to replace fan. Also if the fan is running, check the evaporator coils to see if they are impacted by ice. If they are then you need to check the continuity of the heater and defrost thermostat. If they both check ok then you would need to replace the control board or defrost timer which ever your unit has. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Read More...
Brian for Model Number LFFU14F5HW

Two nights ago here in St. Louis, we had a good lighting storm go through. Lighting struck close to my house. I have a Frigidaire upright freezer, LFFU14F5HW and the exterior LED display/control and interior light (when the door opens) has quit working. However, if I plug it in, the compressor kicks in and it is cooling (continuously, like it has nothing telling it to stop when it hits temp). I am guessing my LED display/controls/control board piece got hit by some Electro Static Discharge (ESD), therefore I am assuming I need a new LED display/controls/control board piece, AP5318915. Is this a correct assumption with the given symptoms above? If so, is it easy to snap in and out? It is ok to leave it cooling continuously until the part arrives (once I order it after getting confirmation of my problem)? I am guessing probably not, so I have been plugging it for 45-60 min every 8 hrs or so. Is this ok? It is pretty full and so I think it would take much longer to start really thawing. Any information anyone could provide would be appreciated. Thanks!

1 Answer

Hello Brian. Yes, based on the information you provided, it sounds like the control board 297370600 is bad and will need to be replaced. It does snap in and out of the unit and is not to hard to replace.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google