Noreen November 10, 2013 I need a new oven controller or control panel or display panel or OEC....what ever it is called. My wall oven is a frigidaire oven 27 inch...made in canada....model # is cfeb789cs1....serial is nf70400329 please let me know which part replaces this one...i would like to order it from you...thanks
Earl Hughes March 10, 2013 for Model Number fed367asb Can I order only the pad cover for the part AP2129234 MFG Part Number: 318185413 Made by: Frigidaire? The unit itself is still functioning but the lettering on the plastic covering has cracked and broken out of the covering.
1 Answer Earl, the manufacturer does not offer the overlay separate from the clock/timer 318185446. Sorry about that! Read More...
1 Answer Hello Mike, You will want to check the wiring of your oven sensor. The F3 error code inicates an open oven temperature sensor. If wiring is ok then do a resistance check on the sensor and it should ohm out at 1090 ohms. If not correct then replace the sensor 316490001. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gohiking November 24, 2012 for Model Number FES368DSA Hello, After doing a oven 3 hour cleaning the oven light no longer lights up. The ovens functions ok. Can the lamp be replaced without changing the entire controller or is there a possible wiring fault? Thanks!
1 Answer Hello, The bulb probably burned out. Only replace it with an appliance bulb for maximun life due to the fact that an appliance bulb is designed to withstand the temperature extremes. Read More...
Randall B September 18, 2012 for Model Number FEB24S5ASB My oven is getting an (F1 Code) and nothing will work. Would a new controler fix this problem?
1 Answer Hello Randall. Based on the error code you provided, it is for control failure and you will need to replace the controller 318185446 in the unit. Read More...
Slyde September 02, 2012 for Model Number fef 450 bwe Oven does not work when you press the bake button. All other controls work fine. Do you think I need to replace the controller or is a simple fix?
1 Answer Hello Slyde, You need to check the safety thermostat, 318003600. If it tests good, the control 318185446 will require replacement. Read More...
Tommy August 18, 2012 for Model Number FEB24S5ASB My controler plastic front mounting ears broke. My board still works fine. I only need the plastic front that the board mounts into. Please help me, cant afford 187.00 for the board. Only need 20.00 plastic front.
1 Answer Hello Tommy. Sorry, but the manufacture does not offer the plastic without the control board 318185446. You can contact the manufacture if needed. Read More...
Gary March 31, 2012 for Model Number feb245asb How to disconnect door lock ? Model feb24f5asb,part 31818446.
1 Answer Hi Gary. You will need to pull out the unit all the way and remove the back. Then find the door latch motor part # 318095957. It may be mounted on the top lt. area. Then carefully disconnect the through rod to the front of the door. You do not want to try to reach in from the front and release it because it will bend the rod part 5303311222 and you may take a chance of not being able to use it well again. If the motor lock assy. locked during a cleaning, then use a volt / ohm meter part # [] and see if the oven sensor ohms out to approx. 1100 ohms. Thank You. Read More...
1 Answer Hello Howard. The model number you provided is not working. Can you provide the correct model number? Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...