Misscoribelle October 03, 2017 for Model Number 216649300 Ever 12 hours the alarm on our chest freezer goes off. Freezer is still cold. Is it the start relay that needs to be replaced.
1 Answer Hello Misscoribelle. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Robin May 16, 2017 for Model Number ul5000ca5 I recently order a starter relay replacement for my freezer. I received the 5304491583 controller kit. Now this kit supplies a wire harness with 2 white wires, in all the instructions it say to connect the red with the red wire and blue with the blue wire. The terminals on the relay do not indicate any numbers or a load or neutral side. Does anyone have an answer for this?
1 Answer Robin, If you connect the connector to the relay, the terminal on the outer edge will be your line feed and the inner terminal will be the neutral. Read More...
Gary December 02, 2016 for Model Number 25318502/ Sears Kenmore chest freezer every month or two my chest freezer just shuts down, what should I check first
1 Answer Hello Gary. It sounds like the thermostat 5304476700 may be bad and need to be replaced on the unit. Read More...
David March 29, 2016 for Model Number 25318351004 if I order a starter relay from you company can I return if I hook it up and my freezer still doesn't work.
1 Answer David, Here is a link to our return policy, http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
David March 27, 2016 for Model Number 253.18351004 How to get the two wires unplugged from the starter relay?
1 Answer Hello David. The terminals have locking tabs on them. You have to insert a pick tool into the slots to release the tabs by pressing them down and then the wires will pull our of the start device. Read More...
Travis February 10, 2014 for Model Number GFC25M4HW0 Freezer will try to start then kicks the thermal reset. Start relay has some melting on face where it plugs into compressor. What's the most likely failed component- capacitor, relay, or compressor?
1 Answer Hello Travis. It sounds like the relay overload needs to be replaced. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/193358-freezer-fridge-not-cooling.html Read More...
Tony November 15, 2012 for Model Number GE ches freezer, don't have model number I have a GE chest freezer that need a overload relay 216649300 replaced. I can get a new relay but my problem is that I lost the wire that goes to this relay. Is there a way to purchase this wire? Thanks, Tony
1 Answer Hi Tony, I need to look at the parts list to see if a wire is listed. In order to do that, I need to know the model number of your refrigerator. Please provide that and I will do my best to help you. Thanks! Read More...
Marcy September 27, 2012 for Model Number frigidaire refrigirator FRT21RRJ compressor starting device. Does the device come with the red and blue wires? The existing device has the red and blue wires built in. I'm wondering if I can cut the existing wire and connect them to the replacement device.
1 Answer Marcy, if the wires are built into the existing part it will come included with the new part. The manufacturer does not show the wiring in the diagram as a replacement. Thanks! Read More...
Joshua August 02, 2012 for Model Number ffc20c4w1 Need to replace start relay but the wires fell off there is a yellow and a white wire and on the relay there is an N and L. Which color goes with which letter?
1 Answer Hello Joshua. White goes to N and Yellow goes to L on the controller 5304491583. Read More...
Randy July 31, 2012 for Model Number AFFC25280W2 (Frigidaire) Problem similar to question above. Compressor stops, soon temperature warning signal sounds (ice is melting). Unplug the cord for 20 seconds then reconnect. Compressor starts and freezes fine. Next cycle, same thing.
1 Answer Hello Randy. Based on the information you provided, it sounds like the voltage board 216893100 is bad and will need to be replaced. Read More...