Bill October 12, 2020 for Model Number LGEF3045KFD Takes 45 Minutes to preheat oven. After the preheating period of 45 minutes, the oven appears to function properly when baking.
1 Answer Bill, with the power cord unplugged, it would be recommended that the bake and broil elements are tested for resistance to ensure they are within operational tolerance. The broil element 316430900 should measure 14.4O and the bake element 316505500 should measure 19.2O. If these test properly, the next step would be to test the oven sensor probe 316490000 for 1100O (plus or minus 10%) at room temperature. If the temperature probe tests within range, then it would be likely that the main control 5304495520 is failing to cycle properly. Read More...
Kathy February 17, 2020 for Model Number RFG533HM*2. #11CA0664 I need a top broiler unit for my Frigidaire self cleaning oven - RFG533HM*2 serial #11 CA 0664
1 Answer Kathy, unfortunately, the model number provided is not registering as a valid model number within our database. If the model number could be verified and posted in a new inquiry, this can assist in the most accurate information being presented. However, If the model number is REG533HM*2, then the broil element would be part number 5303051516. Read More...
Kathy B. February 17, 2020 for Model Number RFG533HM*2 I need a top broiler unit for my Frigidaire self cleaning oven - RFG533HM*2
1 Answer Kathy, The model number you supplied is incorrect or incomplete. Presuming you have a REG533HM*2 electric range, the broil element part number is 5303051516 / 5303051516 ELEMENT-BROIL. The part is in stock and available at this time. Thanks, Read More...
Judy March 05, 2019 for Model Number FEFLM605DSD I have recently noticed that the baking temperature in my oven is off by about 50 degrees low. When I preheat the oven to bake at 350 the preheat shuts off and registers just a little over 300 degrees. Could this be a sign the element is going out? I have manually adjusted the temperature to bake at the correct temperature, but I am more curious as to the reason this might be happening. Thanks for your advice.
1 Answer Judy, you may want to test the temperature probe for resistance. The probe should read around 1100 ohms at 80 degrees Fahrenheit and 1453 ohms at 250 degrees. It should read 1654 ohms at 350 degrees. The way to test would be to pull the range out, and test at room temperature. Then turn the range on to 350 and test the resistance once it reaches temperature. If the temperature probe does not read the proper resistance, then the temperature probe is bad. Read More...
Lori November 17, 2016 for Model Number Modern maid wall oven QCO 450E I am looking for a broil heating element Will AP3776837 work?
1 Answer Lori, Unfortunately we do not have any parts information on this Modern Maid unit and would not be able to advise of the correct element for your unit. Read More...
Mark February 03, 2015 for Model Number FEFL79GBA My wife ran a "Speed Clean" cycle on our oven and then wiped out the bottom with a damp cloth to remove the ashes. Now the oven never gets out of PreHeat when trying to Bake. Gets warm but not hot. Bottom oven coil reads approximately 20 ohms on multimeter when removed from oven. Any suggestions ?
1 Answer Hello Mark. You need to check the control board and see if it is sending power to the element. If not, you will need to replace the board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Leroy October 17, 2014 for Model Number FEFL79HCA my bake element does not heat up all the way, pulled it out tested it on a meter has continuity, just wondering what could be the problem
1 Answer Hello Leroy. Some element do not turn all the way red. If it is only a small part of it, then check voltage and replace element if needed. Read More...
Deborah November 23, 2011 for Model Number PLEFMZ99ECN Is the same heat element used in this model for the top oven as it is for the bottom oven. When I called frigidaire they gave me a part #316415900. Is that the same as the AP3776837?
1 Answer Deborah, The "large oven" bake element 316415900 / 316415900 is correct. The mini oven element 316413902 / 316413902 has a different configuration and electrical rating, They are not interchangeable. Thanks and Good Luck Read More...
Mary October 27, 2011 for Model Number plefz398ece Is parts ap3776987 and ap3776837 elements interchangeable? My bake element is not working and my broil element is. I wanted to switch the 2 until I ordered another bake element. They look the same.
1 Answer Hello Mary. No, they are different elements in the way they are designed. You will need to order 316415900 for the bake element. They are not interchangeable. Hope this helps. Read More...
Vicky D. July 25, 2011 for Model Number PLEFMZ99CCD My top oven quit working. The stove is not that old. Could it be the element? The bottom oven is working but not the top. How long do elements typically last?
1 Answer Hi Vicky. Remove all power to your unit. Remove the back. Unplug one wire on the broil element. Use the ohm meter and see if your element has resistance of 18-40 ohms. If it is open then replace it with part # 316415900. If Your control board/ clock does not send the 240vac to the element, then possibly a relay on the board is faulty. Replace it with part # 316418704.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Thank you. Read More...