Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Range Oven Bottom Panel by Frigidaire

Best Seller
Manufacturer Part
4.89 (64)
By: Frigidaire
Part Number: OEM11194230
Manufacturer Part Number: 316400601

Replaces the metal panel at the base of your oven interior. Installs on the oven floor. Needed when original is warped, rusted, or damaged by foil.

More

Questions & Answers

For Frigidaire Range Oven Bottom Panel (Part Number: OEM11194230)

Kelly for Model Number Lfef3048qfa

I have a frigid Aire electric range,I bought new.when I went to use the oven about one year later.I know I don't cook much.but I noticed the heating element is open and exposed on the bottom of the oven?so when I bake if it boiled over it will spill on to the heating eleament. I'm not sure this is correct.shouldn't the heating eleament have some kind of protective cover?I can't imagine baking on rack above this while its exposed.any help sher would be appreaciated.

Erik for Model Number FEF366ECD

I need to replace my baking heating element and the bottom pan under the element. Your web site talks about 2 screws in the back edge to take out then angle pan out. I do not have the 2 screws. My pan has 2 spring caps covering the holes and when you take the caps out there are no screws anywhere. I have tried to lift the back of the pan but it acts like there is something holding it someplace. Can you tell me what is holding the pan from coming out and where the possible screws may be located?

1 Answer

Erik,

According to the information it appears that the panel has 2 screws that should be removed. This is the only way that we know that come the panel would come out.

Read More...
Kris

Bought a bottom panel for frigidaire oven and got old panel out and new panel in, but for the life of me I cannot get the screws to line up to screw back in. It fits pretty flush with bottom of oven but wasn't sure if it's absolutely necessary that I screw on. Seems to be okay and heats up fine. I tried to remove and put back in several times and to line up screws, but noticed that front of panel that sort of pushes forward was getting small scratches each time I removed and put back in. I even tried leaving screws in panel and lining up but would not work as front has to sort of slide in first. Will this be ok without screws tightened?

1 Answer

Hello Kris. The screws go in at an angle. If not, they will never align properly. Make sure the front lip of the bottom in tucked under the liner also.

Read More...

1 Answer

David,

It may be a issue with the screw being stripped if it is just turning. You would want to try to get something under the head of the screw and try to get it out.

Read More...

1 Answer

Chris,

At the back of the oven bottom there will be 2 screws. You will remove the screws, then get a small screwdriver in the hole and use it to lift the oven bottom.

Read More...

1 Answer

Controller,

There are 2 screws at the back of the oven that you remove. Once removed you will lift up the oven bottom from the back and lift it out. Install the new one in reverse.

Read More...

1 Answer

Hello Bernie. You will need to remove the drawer from the unit and remove the door from the drawer. Then disassemble the door to replace the glass. Take photos to help with putting the door back together.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google