Diann September 11, 2016 for Model Number FFAD7033R1 Our ice maker is not producing very much ice. We're trying to replace the PureSource Ultra filter but can't get the old one out. The instructions say to push to release the filter but it's not releasing. Any advice?
1 Answer Diann, The only way to get the filter out is with force and sounds like you will need to get the filter head assembly as it appears to be defective if it will not release when pushing the button in. Read More...
Paul S September 11, 2016 for Model Number FRS23R4CB0 On Frigidaire Pure Source, when water is demanded by ice maker or door dispenser, water is not delivered, but leaking at filter. What could be the problem?
1 Answer Paul, Either the water filter has a crack in it causing the leaking or the filter head is faulty and would need to be replaced. Read More...
Lois M September 02, 2016 for Model Number frs26h5aqsb5 Water filter replaced in June, suddenly no water or ice. Investigation shows filter pops out when ice or water lever pushed? Why? How to fix?
1 Answer Lois, The thing that is causing the filter to pop back out is the filter head assembly part number 240396002. Read More...
James July 05, 2016 We're having a problem with the water not dispensing out of the spout on the freezer. The unit is making ice and when the water lever is depressed you can hear it trying but no water is coming out. Any suggestions?
1 Answer Hello James. Check and see if the water line is frozen in the freezer door. If so, you will need to thaw out the door on the unit. Read More...
Ashley June 28, 2016 We just replaced our frigidaire water filter but the fridge is still saying to "replace" the filter. Is it a bad filter? A malfunction with the sensor?
1 Answer Hello Ashley. You will need to reset the filter on the unit. You can read in the owners manual on how to reset the status of the filter. Thanks. Read More...
Alec June 27, 2016 for Model Number GLHS67EHB0 Ice machine will not fill with water. There is water at the door so pump and switch are working.
1 Answer Hello Alec. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Cara June 15, 2016 I replaced the puresource 2 filter but water is not coming out and ice machine not reproducing ice.
1 Answer Hello Cara. You will need to check the water supply, water valve, and for a frozen water tank. Read More...
Joe June 12, 2016 for Model Number FRS26LF7DSR I have installed new Frigidaire WF2CB water filter now the water in door will not discharge water. what to do to fix?
1 Answer Joe, With the water not coming out when putting the new filter in, this would most likely be caused by a faulty filter base. You will want to try to purge the water line to make sure that there is no air in the lines but it sounds like the filter head may be bad. If the unit is making ice still then you will want to check to see if the water line in the door is frozen by disconnecting the water line at the door hinge and push the button to see if water comes from the tubing coming from under the refrigerator and if it does then the water line in the door is frozen and will need to be thawed. Read More...
Alicia April 28, 2016 for Model Number FRS26H7CB2 We installed a new Pure Source 2 Filter and it keeps popping out when we run the water dispenser.