Alan August 07, 2022 for Model Number FGHD2433KF1 My Frigidaire dishwasher door won't stay open? The problem is probably a broken spring. Do I need to order one or two springs? Thanks, Alan
1 Answer Alan, Based on the model number provided this unit uses a spring and cable system on each side so it would be advisable to check to see what is broken or you will need two each to completely replace the system. Part numbers are 154756401 Cable 154579101 Spring Read More...
Bob July 09, 2022 for Model Number FGID2466QF4A The door is making noise when opening and closing. What would cause this?
Tim Stoker September 07, 2021 for Model Number FGID2466QD0A Replaced the door springs and the friction door cables and the door is not horizontal when open what to do
1 Answer Tim, If the door is still elevated a little then you may need to adjust the springs to a slot closer to the front. There should be several slots that it could go into and you would just need to move it. Read More...
1 Answer Judy, Here is a link to our shipping page. https://www.appliancepartspros.com/customerservice/shipping.aspx Read More...
G.D. November 11, 2019 for Model Number FGBD2438PF3A Question: I typed in the Door Spring item no. #154579101 for DW, model FGBD2438PF3A, and your site came up with # AP3958752. According to a number of websites, that door spring i.d. was replaced with door spring 154579101. I suspect it was replaced, due to the OEM inferior door spring that came with the Frigidaire FGBD2438PF3A Dishwasher we've had only 5 years with only two, over 60yr old residents using it and using it very seldom. The door started to drop lower and became hard to handle for the wife. I checked the door assembly out and found the door springs to be stretched and distorted from its original shape. I've not seen that in any dishwasher I had to work on and install or take out over the decades of being a plumber. I also find these springs to be OVER-PRICED to say the least. Most prices on the net are in the mid to high 40's to the 50's. Ridiculous for 2 damn springs. This is a no brainer to fix but, my original question.. why are you showing an obsolete number, when everyone else is showing the replacement no. of 15457901 ?? which I typed in when looking for it on your site.
1 Answer G.D., the door spring 154579101 is the most current part number listed by the manufacturer and the part numbers it replaces are listed after it as a reference to indicate the previous part number allocations. The part number AP3958752 is the distributor part number that we utilize. Read More...
Homeowner December 30, 2013 for Model Number FGHD2433KW1 My dishwasher door was overextended after an accident. The hinge cables and springs were both intact, but the spring on the right side seems to be slightly loose when the door is fully closed. Should I replace just the spring or the hinge cable as well?
1 Answer Hello Homeowner, This is most likely the fault of a bent door hinge. It could also be attributed to a bent frame. The unit needs to be pulled out far enough to inspect both sides. The tight side will be the way the other side should look. If you find the hinge is bent, you will see the difference by comparing it to the way the other side looks. You can also take measurements with a tape measure to compare for differences. Don't overlook the fact that a bent door will affect the door closure and cab also cause slack in the door springs. Read More...
Mike November 19, 2012 for Model Number FDB2415LFB0 How many springs do I need and can I replace them or do I need a service call?
1 Answer Hello Mike. There are 2 springs 154579101 on the unit. These are fairly easy to replace, but will require the dishwasher to be pulled out from the cabinets to replace them. Read More...
Erik March 15, 2011 for Model Number PLD4375RFC0 When we open the door of the dishwasher it makes a very loud noise. Like a spring is stretching to much. what could it be?
1 Answer Hello Erik. Check the spring and the cable and make sure they are not broke. Hope this helps. Read More...