Pam C June 14, 2017 for Model Number jc28v3dc I have a very old double oven from the 60's . Model number is difficult to decipher, but looks like it could be JC28v3dc. We need a bottom heat element with 236 volts and 3000 watt. can you help us?
1 Answer Pam, The correct part number for the bake element on your unit will be WB44X5099. Read More...
Sammy D March 31, 2017 for Model Number rb6360t2ad WB44X5099 - Element connection - The Screw holes? My oven had the original Ring Terminals cutoff by the original owner installing the wrong part...All I have is a bare wire. I have the element listed above, but I cannot connect it because I do not have the correct high temp Ring Crimp-On terminal. Anybody know the Ring Terminal stud size needed to fit the screw hole for this element...I'm guessing a stud size 8 or 10? Does anyone know for sure. Or even the correct Crimp-On Ring Terminal replacement part#? Thank you!
1 Answer Sammy, Unfortunately we would not have the size of the ring terminal that would be needed for the bake element. Read More...
Joan G. December 18, 2016 for Model Number YW010735 or YW010735 I have an early 60's GE wall oven and I need the bake element. The tag has been scrubbed too many time to make out the model number, but I have listed the two numbers I can find. The old element is approx 20" in width, and 15.5" in length (measured from the plate that attaches to the back wall). The mounting plate is hinged, attaches with screws, and it says Watts 3000, Volts 236 - nothing else. Can you tell me which part number I need for the bake element? Thanks!
1 Answer Joan, At present there are only two(2) GE oven hinged bake elements available from AppliancePartsPros.com, WB44X5082 / WB44X5082 and WB44X5099 / WB44X5099. The dimensions on the new elements are slightly smaller (18"X15") . you may want to review the photos in the parts order screens and compare them to your present bake element. The parts are in stock and available at this time. Thanks, Read More...
Pat December 11, 2016 for Model Number ? Could you tell me the dimensions of the GE oven baking element #AP2031097? I'm almost positive this is the one I need for my 1970's, maybe early 80's oven. The only identifying info on this oven is " Microwave Cooking Center" and "P7 Oven Cleaning."
1 Answer Pat, The overall dimensions of this bake element WB44X5099 would be approximately 18 1/4" width x 15" depth to the bracket and overall depth of 17 1/2" with the terminals. Read More...
Clyde October 24, 2016 for Model Number J D14X1DC Found one that looks like old but would rather have your opinion. Wonder about the volts and watts. Tags on my oven says 115/230 120/240v Your info says rated at 220 volts and 2300 watts Don't know what any of that means. Thanks
1 Answer Hello Clyde. That is just saying the element is for a 240 volt stove. If it matches your, it should work fine. Thank you. Read More...
Robert May 19, 2016 for Model Number GE J404R This is a very old oven and need a heating element for the oven. The old one is approx 21 in wide and 15 in long with a 5 in dip in the middle. Thanks for the help
Dexter Ford May 19, 2016 for Model Number GE Electric Range J40 6T I need the oven heating element for the bigger side of the oven. This is a pretty ancient range/oven, so the model number doesn't ring any bells. Element needs to be 20 inches wide, 14-15 inches deep, and uses terminals which screw onto the free wires--not push-on. Whatcha got that will work? Thanks, Dexter
Otto December 28, 2015 for Model Number GE wall oven I need a Heating Element for my antique GE wall oven Mode JD 15? Please help, Thanks
Oscar August 21, 2015 for Model Number GE Wall Oven JkS06g0j4bg I need a new control panel for an older GE wall over - model JkS06g0j4bg. Versus remodeling the cabinet it is built into and buying a new oven.
Ron August 10, 2015 for Model Number RB757B B1WH I need to replace the oven element on my hotpoint range. Can you tell me the part number that will work? Thanks!