Roy May 03, 2016 for Model Number PSHS6TGXBDSS Stopped making ice. No water in fill cavities. Do not hear it trying to fill. Sounds like water inlet valve not functioning? Any ideas? All other water and ice dispenser functions are working Roy
1 Answer Hello Roy. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Dustin M May 01, 2016 for Model Number GSHL6KGZBCLS My ice maker wouldn't eject the frozen cubes. I took it out, let it thaw/dry and reinstalled it. Now it will not fill, the ejection arms don't move, and it will do nothing in "service" mode. Water at the door still comes out fine. Is my ice maker bad? Any easy way to check? I am familiar with test meters, etc. Ice maker # WR30X10093 Thanks
1 Answer Hello Dustin. Based on the testing you did, the icemaker is bad and will need to be replaced in the unit. Read More...
Judy April 30, 2016 for Model Number ZIC360N My refrigerator is about 8 years old and I don't always have ice. The little white arm that comes out to determine if the bucket is full doesn't always come out, it gets stuck and I manually have to pull it out for it t make ice. Is there a simple solution or do I need to purchase a replacement ice maker?
John April 20, 2016 for Model Number tfx25nrdaww I used this part to replace ice maker in my GE side by side. tfx25nrdaww Install was fine and it makes ice but now the dispenser does not work. are the cubes too big. It seems to jam the dispenser. The shaved ice dispense works but whole cubes don't."
1 Answer Hello John. Under the round cover on the side of the head is a cube size adjustment screw. You can make the cubes smaller by adjusting the screw. Read More...
John H April 20, 2016 for Model Number WR30X10093 (AP4345120) I used this part to replace ice maker in my GE side by side. Install was fine and it makes ice but now the dispenser does not work. are the cubes too big. It seems to jam the dispenser. The shaved ice dispense works but whole cubes don't.
1 Answer Hello John. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Ana Freitas April 16, 2016 for Model Number icemaker wr30x10093 model can 26 115V, 60Hz I need to buy a new ice maker and this is what is written on mine. Do you have any that fit this model?
1 Answer Ana, The icemaker is part number WR30X10093 and you would just need to put this number into the search on the website to order the part. Read More...
Mary March 23, 2016 for Model Number GSH25JSBB How does one turn off icemaker when going on vacation?
1 Answer Mary, On the side of the icemaker there is a switch that you would slide to the right or a button that you push up to turn the icemaker off. Read More...
Tony February 12, 2016 for Model Number GSS25WGPABB leaking water from tubing at back of refridgerator
1 Answer Tony, The tube that runs up the back of the refrigerator goes to the icemaker and is part number WR17X11625. This connects to the fill tube that leads to the icemaker which the fill tube is part number WR17X11168 which comes with the tube. If this is leaking then make sure that the fill tube is not frozen. If it is then the water valve is seeping and would need to be replaced. Read More...
Larry W. February 11, 2016 for Model Number pss25sgna The ice maker has bad taste in the ice. I need to know why. We have changed the filter. Thanks
1 Answer Hello Larry, I would try turning the water off and cycle the icemaker one time to empty. Pour in enough water to properly fill the icemaker and see if the cubes still have the flavor. If so, replace the icemaker. If not, the water valve and line can be replaced but you should check if the water from the wall has the flavor. If so, you may need to add an in-line filter RT10400C & TJ9SSIM1. Read More...
Jason February 05, 2016 My icemaker has flooded my house twice it just keeps pumping water when it cycles what do I need to replace the ice maker or the pump.
1 Answer Jason, In most cases the cause for the icemaker continuing to get water to it would be a faulty water valve that is not shutting off. Read More...