Paul January 05, 2016 for Model Number WR30X10093 (part number) i just recieved the part listed WR30X10093. i am not sure that the fill cup is on the old unit and there was not a video to describe how the fill cup and the water source might have to be modified. i am doing this for a relative and am not at their house, so i want to be prepared when i get there.. is there some instruction on how to install the new fill cup if the old does not exist. on a similar note, is the new fill cup the same as the old? thanks for your help
1 Answer Hello Paul. The fill cup is easy to install. It just snaps into place on the icemaker. The icemaker will come with instructions also. Read More...
Steve G December 30, 2015 for Model Number ZICS360NRGLH Hi, my icemaker stopped working entirely. It will not cycle at all no matter how many times I try to shut it off and move the arm back 3 times. There seems to be a tiny light and that is not lit. Is that the icemaker or the water valve?
1 Answer Steve, The "tiny light" is the power circuit in the icemaker control head assembly. Check and make sure the wire harness hasn't come loose from the wall outlet in the freezer wall. If all's OK, replace the icemaker " Per Factory No Individual Parts Available For This Icemaker Must Replace Icemaker ." WR30X10093. Read More...
Wade December 20, 2015 for Model Number Ge gsh25jsta ss No ice but when initiate a dump cycle by pressing the bar in three times, It cycles and puts a small amount of water in the tray. If I turn the icemaker on and off it dispenses a small amount of water in to the ice tray. It will dump the cubes but never fills the tray after the manually initiated dump cycle. So everything is functioning but no ice. Where do I go from here.
1 Answer Wade, Based on the information, this issue sounds like it will be caused by a faulty icemaker assembly which is part number WR30X10093. Read More...
Jim December 01, 2015 for Model Number ZIBI240PBII The plastic paddle that determines whether or not to continue making ice broke off. Do I have to buy the entire ice maker assembly, or can I just buy the plastic paddle?
1 Answer Hello Jim. They do not offer parts for these icemakers. You will need to order and replace the icemaker in the unit. Read More...
Paul G November 25, 2015 for Model Number 363.50232000 or 363.50242000 The water dispenser on our refrigerator works fine but the ice machine will not add water to make ice. I have added water manually and it will freeze but it will not eject the cubes. The fill tube is clear.
1 Answer Paul, If the unit is not ejecting the ice and no water is coming into the icemaker then this would be a faulty icemaker and will need to be replaced. Read More...
Jim November 22, 2015 for Model Number ESH22XGPBCC My ice maker will not stop making ice. Ice stop bar is not preventing it to stop when bin is full. I was told that this is just a GE and nothing I can do about it. Is there a solution to my problem?
Clay D. November 21, 2015 for Model Number PSS25MGNAWW Can the ice cubes be made smaller? They keep jaming the outlet when coming out.
1 Answer Hello Clay, I'm sorry but this icemaker shows no adjustment for the water fill. If you can decrease the water pressure to the icemaker, the result will be smaller cubes. Read More...
Mike November 09, 2015 for Model Number GTS21KCXAWW My ice maker stopped making ice. I replaced the water valve at the bottom rear of the fridge and then also replaced the ice maker unit inside the fridge. It is still not began making ice. Is there a fuse or some other part that might be the problem?
1 Answer Hello Mike. Make sure the freezer is between 0° and 5°. Also, check and make sure the fill tube on the unit is not frozen and clogged. Read More...
Mehrda November 08, 2015 for Model Number wr30x0289 My ice maker does not stop filling up with water and the water keeps coming in and overflow into the ice bucket an freezer.
1 Answer Hello Mehrda. You need to check and see if the icemaker is stuck and supplying power to the valve. If so, replace the icemaker. If not, replace the water valve. Read More...
A.P. November 04, 2015 for Model Number GSS201EPDWW Dispenser puts out crushed ice only. No cubed. Why?
1 Answer Hello A.P., The solenoid WR62X23154 beside the auger motor is most likely frozen. If blowing a hair dryer on it for about 10 to 15 minutes restores operation the issue is normally an air leak at the ice door caused by a rusted ice door solenoid WR62X10055. Read More...