Jason December 21, 2017 I have this ice maker. It seems it is letting out too much water. I don’t see any way to adjust the water level.
1 Answer Jason, If you remove the front cover of the icemaker there would be a set screw but unfortunately this will only adjust it minimally and it sounds likely that the icemaker may be faulty. Read More...
Dale December 16, 2017 for Model Number CTX21GIXFRWW The flap that is supposed to move when turning the ice maker on is stuck. What can I do to get it to release so that the water will fill the ice maker?
1 Answer Hello Dale, You will need to replace the icemaker assembly WR30X10093 to correct this issue. Read More...
Douglas November 22, 2017 for Model Number TFX25 ppbbbb Ice maker not filling, I have replaced the water solenoid valve not sure what my next trouble shoot step is.
1 Answer Hello Douglas. Make sure the freezer is between 0° and 5°. If so and the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Justin Bennett October 30, 2017 for Model Number gss20gewe ww The ice maker makes ice but the fingers stop short, not letting ice drop into the bucket. When I push the arm in and back out, the fingers start moving, pushing the ice into the tray. It continues to start another cycle but when I return and inspect again, it has made ice but stopped before it could fully harvest it. Does the ice maker need to be replaced?
1 Answer Justin, Yes, you'll need to replace the ice maker WR30X10093 / WR30X10093 Ice Maker Kit, "Per Factory No Individual Parts Available For This Icemaker Must Replace Icemaker Includes Adapter Plug." There are several possible internal mechanical failures that could account for the problem you described. Read More...
Jay October 24, 2017 for Model Number GSHL5KGXDCLS My ice maker is grinding when making new ice. What is wrong with it?
1 Answer Hello Jay, The icemaker has damaged gears that are slipping over the teeth of one another. The only way to correct this is to replace the icemaker assembly WR30X10093. Read More...
Michael October 19, 2017 I have a GE side-by-side refrigerator with a WR30X10093 ice maker. Even when the ice maker switch is in the OFF position, it keeps making ice to the point that it spills out all over the freezer. I am looking at replacing the feeler arm, but will this solve the problem?
1 Answer Hello Michael. If the old feeler arm is not broke, it will not fix the issue. You will need to order and replace the icemaker in the unit. Thanks. Read More...
St3v3 October 19, 2017 for Model Number TFX25PRYFBB Replaced old ice maker with the WR30X10093. The WR30X10093 spilled water into the ice bin and down the wall of the 16 year old side-by-side refrigerator. Adjusted the ice size and made sure it was level. Still leaked into the bin and down the interior wall. Any fix for this?
1 Answer Steve, This issue sounds like it would be caused by a possible water valve not closing all the way and would recommend a new water valve. Read More...
Kathleen October 11, 2017 for Model Number GE TBX21NI I replaced the ice maker September 1, 2016. In April of 2017 I was having problems and was told the defrost switch needed to be replaced so I replaced it. I just looked and the ice maker isn't making ice. The freezer temperature dial is on C and the refrigerator temperature dial is on 4. So far I have spent $600 on a refrigerator that was here when I purchased the house February 2009. Is it time to buy a new refrigerator? Thank you!
1 Answer Hello Kathleen. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello William. If the icemaker is not shutting off like it should, you will need to order and replace the icemaker in the unit. Thanks. Read More...
Jeff September 14, 2017 for Model Number GSS20GEWJ WW The auger doesn't turn to dispense ice when the lever is pushed on my GE side by side Fridge. What part do I need to replace?
1 Answer Hello Jeff. You will need to test for power to the auger motor WR60X10258. If it is there and it does not turn, then the motor needs to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...