Jeff September 14, 2017 for Model Number GSS20GEWJ WW The auger doesn't turn to dispense ice when the lever is pushed on my GE side by side Fridge. What part do I need to replace?
1 Answer Hello Jeff. You will need to test for power to the auger motor WR60X10258. If it is there and it does not turn, then the motor needs to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Rick September 11, 2017 for Model Number WR30X10044 My ice machine is working but it is filling too much water into the trey. The cubes are stuck together. Will a new ice maker correct this?
1 Answer Rick, It would be more likely that the water valve is causing this issue. It sounds as though water may be trickling through the valve and would need a valve for the unit. Read More...
Sacha September 01, 2017 for Model Number GE GSH25JFTFWW fridge Ice maker doesn't stop making ice and basket fills up too high to open. Not sure which part in the schematic addresses this issue.
1 Answer Hello Sacha. You will need to order WR30X10093 for the icemaker needed to resolve the issue. Thanks. Read More...
Mark August 09, 2017 I received my new ice maker and the electrical plug is different mine is 4 prongs all in a row the new one is 4 prongs in a square
1 Answer Hello Mark. There are adapters in the kit you will need to use to fit the one you have in your unit. Thanks. Read More...
Tony August 09, 2017 for Model Number GSH22JSXASS My ice maker overflows ice auto stop guide not working, it is stuck on crushed wont go to cubed. It seems the part inside that clicks up and down for cubed and crushed freezes. I heated it up and it was clicking up and down for cubed to crushed but now is frozen on crushed again . The back cover part 361 on diagram map is all cracked dont know if that has anything to do with it thanks
1 Answer Tony, The piece in the back that is cracked would not have anything to do with the freezing of the ice solenoid. This would require a new solenoid. For the issue with icemaker not stopping making ice then there is a feeler arm that you can get to correct his issue which will be part number WR49X10103. Read More...
Trudi August 08, 2017 for Model Number GTH18CCEDRWW I live in an apartment that has this refrigerator and it does not make much ice. How much ice should be made in a day? I am only getting 21 cubes a day.
1 Answer Hello Trudi, You will need to first check the operating temperature in the freezer compartment. It should run from 0° to 10 °F for optimum performance. If the temperature is okay, replace the icemaker assembly WR30X10093. Read More...
Ryan0001 July 31, 2017 for Model Number WR30X10093 i'm trying to find a replacement thermostat for this ice maker. The thermostat says Clinac CS-7 on one side and CS-7SA 75F 7242 on the other side. i've googled these and several keywords but can't find it. Also, is it possible to buy a small amount of thermal mastic and lubricant for this application?
1 Answer Ryan, Unfortunately, you won't find the thermostat available as a separate, individual component. " Per Factory No Individual Parts Available For This IcemakerMust Replace Icemaker . " The alumilastic and food grade silicone grease won't be necessary, unless you need them for another project. Sorry, Thanks, Read More...
Joann H. July 22, 2017 My GE WR30X10044 ice maker is functional, but it keeps breaking the ice stripper. Is it possible that the tray heater has failed? And if this is the likely case, can the tray heater be replaced rather than replacing the whole ice maker? I have done enough research to know that the replacement model for this entire ice maker is WR30X10093 I just hate to replace the whole thing if we can simply replace the heater part.
1 Answer Hello Joann, I'm sorry but replacement parts for the icemaker have been discontinued by the manufacturer so the complete assembly will have to be replaced to correct this issue. Read More...
1 Answer Hello Dmitri. If the icemaker is overfilling, replace the water valve. However, if the icemaker is leaking, just replace the icemaker. Read More...
Joe July 15, 2017 for Model Number TPX21BRXDWW My refrigerator is 15 years old. It has been maintained and is in good working order. Problem is it has stopped making ice. It has the compact style ice maker mounted on the left side of the freezer compartment. I would prefer to replace rather than repair. I see your new electronic ice maker is shown to be compatible. However, the install video shows it being installed on the rear wall. Can it be installed on the left side wall in the old ice maker position?
1 Answer Joe, Yes, the WR30X10093 / WR30X10093 Electromechanical Ice Maker Kit is the correct replacement ice maker for the model number you supplied " Per Factory No Individual Parts Available For This Icemaker. Must Replace Icemaker, includes Adapter Plug # Wr29x10049 ". Yes the ice maker will mount to the side wall in the same location as the original ice maker. It also has complete installation instructions for several different models. Read More...